WU Hai-ping, WU Xijun | LIU Jin-fang, WANG You-wen, et al. Properties of isotropical conductive adhesives f illed with carbon nanotubes[J]. Acta Materiae Compositae Sinica, 2006, 23(2): 9-13.
Citation: WU Hai-ping, WU Xijun | LIU Jin-fang, WANG You-wen, et al. Properties of isotropical conductive adhesives f illed with carbon nanotubes[J]. Acta Materiae Compositae Sinica, 2006, 23(2): 9-13.

Properties of isotropical conductive adhesives f illed with carbon nanotubes

More Information
  • Received Date: April 17, 2005
  • Revised Date: June 09, 2005
  • Two kinds of isot ropical conductive adhesives ( ICA) were developed by using carbon nanotubes (CNTs)and silver coated carbon nanotubes (SCCNTs) as conductive fillers. The elect rical , mechanical and aging propertiesof the above ICAs were investigated and compared with those of conventional ICA filled with 1μm average-sized Agparticles. The result s indicated that the percolation threshold of bulk resistivity reaches 2. 4 ×10-3Ω·cm for ICAwith 31 % filler content of CNTs and the shear st rength of ICA with 23 % filler content of CNTs approaches themaximum value. At the same filler content of 28 % , the ICAs filled with SCCNTs show the lowest conductive resistivity of 212 ×10-4Ω·cm and the ICAs filled with both CNTs and SCCNTs exhibit higher shear st rength of 19. 6MPa. The result s of aging properties tested under the conditions of 85 ℃, RH85 % for 1000h showed that the shif t sof both bulk resistivity and shear st rength do not exceed 10 % for the ICAs filled with both CNTs and SCCNTs ,while the shif t s of conductive resistivity and shear st rength are 350 % and 120 % , respectively , for ICA filled withmicro-sized Ag particles.
  • Related Articles

    [1]HU Chunxing, HOU Yuliang, TIE Ying, LI Cheng, TIAN Keke. Multi-objective optimization of adhesively bonded single-lap joints of carbon fiber reinforced polymer laminates based on genetic algorithm[J]. Acta Materiae Compositae Sinica, 2021, 38(6): 1847-1858. DOI: 10.13801/j.cnki.fhclxb.20200824.001
    [2]ZHANG Qiuyue, AN Luling, YUE Xuande, LI Zhihui, GUO Jia. Optimization of size and layout of pressing force for composite airframe structure assembly based on genetic algorithm[J]. Acta Materiae Compositae Sinica, 2019, 36(6): 1546-1557. DOI: 10.13801/j.cnki.fhclxb.20180816.001
    [3]JIN Dafeng, LIU Zhe, FAN Zhirui. Ply optimization of composite laminate with ply drop based on genetic algorithm[J]. Acta Materiae Compositae Sinica, 2015, 32(1): 236-242. DOI: 10.13801/j.cnki.fhclxb.20140408.001
    [4]XU Yangjian, LI Xiangyu, WANG Xiaogui. Genetic algorithm based inverse analysis for functionally graded material parameters[J]. Acta Materiae Compositae Sinica, 2013, 30(4): 170-176.
    [5]FENG Xiaobing, HUANG Hai, WANG Wei. Strength optimization of large wind turbine blade root on the genetic algorithm[J]. Acta Materiae Compositae Sinica, 2012, (5): 196-202.
    [6]CHEN Luyun, ZHANG Yufang. Composite material structural-acoustic optimization based on genetic algorithm[J]. Acta Materiae Compositae Sinica, 2012, (3): 203-207.
    [7]LI Shuo, XU Yuanming, ZHANG Jun. COMPOSITE STRUCTURAL OPTIMIZATION DESIGN BASED ON NEURAL NETWORK RESPONSE SURFACES[J]. Acta Materiae Compositae Sinica, 2005, 22(5): 134-140.
    [8]ZHANG Zhifeng, CHEN Haoran, LI Xuan, JIANG Yuanxing. HYBRID GENETIC ALGORITHM FOR OPTIMUM DESIGN OFADVANCED GRID COMPOSITE CIRCULAR CYLINDERS[J]. Acta Materiae Compositae Sinica, 2005, 22(2): 166-171.
    [9]YAO Wei, TAN Hui-feng, DU Xing-wen. APPLICATION OF GENETIC ALGORITHM TO MULTIOBJECTIVE OPTIMIZATION OF TIRE STRUCTURE[J]. Acta Materiae Compositae Sinica, 2002, 19(3): 109-113.
    [10]Luo Zhijun, Qiao Xin. OPTIMIZATION OF PLY STACKING SEQUENCE FOR NATURAL FREQUENCIES OF COMPOSITE LAMINATES BY GENETIC ALGORITHM[J]. Acta Materiae Compositae Sinica, 1997, 14(4): 114-118.

Catalog

    Article Metrics

    Article views (3258) PDF downloads (1208) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return