Volume 40 Issue 2
Feb.  2023
Turn off MathJax
Article Contents
ZHU Jun, GUI Lin, LI Guo, et al. Prediction of the effective elastic properties for plain woven fabric composite based on the structural parameters[J]. Acta Materiae Compositae Sinica, 2023, 40(2): 804-813. doi: 10.13801/j.cnki.fhclxb.20220424.004
Citation: ZHU Jun, GUI Lin, LI Guo, et al. Prediction of the effective elastic properties for plain woven fabric composite based on the structural parameters[J]. Acta Materiae Compositae Sinica, 2023, 40(2): 804-813. doi: 10.13801/j.cnki.fhclxb.20220424.004

Prediction of the effective elastic properties for plain woven fabric composite based on the structural parameters

doi: 10.13801/j.cnki.fhclxb.20220424.004
  • Received Date: 2022-01-17
  • Accepted Date: 2022-04-16
  • Rev Recd Date: 2022-04-12
  • Available Online: 2022-04-25
  • Publish Date: 2023-02-15
  • The warp and fill fiber strands interlacing in two mutually orthogonal directions to one another results in the fiber curvature, namely the waviness, which is the inherent characteristic of plain woven fabric composite. First, a mathematical description was developed to accurately represent the 3D architecture morphology of the unit cell for plain woven fabric composite. Next, an analytical multi-parameter model of plain woven fabric composite was established based on the classical lamination theory and iso-stress assumption. Meanwhile, the bending-extension coupling effect due to asymmetry along the thickness-direction as well as the architecture morphology of the unit cell was embedded in this model. The validation of several typical cases shows that the predicted effective elastic properties of plain woven fabric composite agree well with the numerical values of the finite element model, the results of the analytical model and the experimental data cited in the related literatures. Also, the predictions of the analytical multi-parameter model, especially the Z-direction ones, are more approaching to the experimental data than counterparts of other analytical models aforementioned. Furthermore, the influence of the structural parameters such as the waviness ratio of the fiber strand containing both the undulation direction and the cross section, the thickness of the preform consisting of the warp and fill fiber strands, the length of the curved section of the fiber strand and the spacing between the adjacent fiber strands on the elastic properties of plain woven fabric composite is elaborated. The present approach of the analytical multi-parameter model provides a reference for evaluating the mechanical properties of textile composite.


  • loading
  • [1]
    王琦, 蒋秋梅, 杨旭锋, 等. 三维机织复合材料残余应力/应变多尺度分析及工艺参数优化[J]. 复合材料学报, 2021, 38(4):1167-1176.

    WANG Qi, JIANG Qiumei, YANG Xufeng, et al. Multiscale analysis and process parameters optimization of residual stress/strain of 3D woven composite[J]. Acta Materiae Compositae Sinica,2021,38(4):1167-1176(in Chinese).
    张超, 许希武, 许晓静. 三维多向编织复合材料宏细观力学性能有限元分析研究进展[J]. 复合材料学报, 2015, 32(5):1241-1251.

    ZHANG Chao, XU Xiwu, XU Xiaojing. Research progress in finite element analysis on macro-meso mechanical properties of 3D multi-directional braided composites[J]. Acta Materiae Compositae Sinica,2015,32(5):1241-1251(in Chinese).
    陈利, 焦伟, 王心淼, 等. 三维机织复合材料力学性能研究进展[J]. 材料工程, 2020, 48(8):62-72. doi: 10.11868/j.issn.1001-4381.2020.000210

    CHEN Li, JIAO Wei, WANG Xinmiao, et al. Research progress on mechanical properties of 3D woven composites[J]. Journal of Materials Engineering,2020,48(8):62-72(in Chinese). doi: 10.11868/j.issn.1001-4381.2020.000210
    李明, 陈秀华, 汪海. 二维平纹机织复合材料弹性性能预测的域分解方法[J]. 复合材料学报, 2012, 29(6):197-205.

    LI Ming, CHEN Xiuhua, WANG Hai. Evaluating the mechanical behavior of 2D woven fabric composite by domain decomposition method[J]. Acta Materiae Compositae Sinica,2012,29(6):197-205(in Chinese).
    卢子兴, 徐强, 王伯平, 等. 含缺陷平纹机织复合材料拉伸力学行为数值模拟[J]. 复合材料学报, 2011, 28(6):200-207.

    LU Zixing, XU Qiang, WANG Boping, et al. Numerical simulation of plain weave composites with defects under unidirectional tension[J]. Acta Materiae Compositae Sinica,2011,28(6):200-207(in Chinese).
    徐焜, 许希武, 汪海. 三维四向编织复合材料的几何建模及刚度预报[J]. 复合材料学报, 2005, 22(1):133-138. doi: 10.3321/j.issn:1000-3851.2005.01.024

    XU Kun, XU Xiwu, WANG Hai. On geometrical model and stiffness prediction of 3D 4-directional braided compo-sites[J]. Acta Materiae Compositae Sinica,2005,22(1):133-138(in Chinese). doi: 10.3321/j.issn:1000-3851.2005.01.024
    燕瑛, 楼畅, 成传贤, 等. 机织复合材料力学性能的细观分析与实验研究[J]. 复合材料学报, 2001, 18(2):109-113. doi: 10.3321/j.issn:1000-3851.2001.02.025

    YAN Ying, LOU Chang, CHENG Chuanxian, et al. Micromechanical analysis and experimental evaluation of the property of woven composite materials[J]. Acta Materiae Compositae Sinica,2001,18(2):109-113(in Chinese). doi: 10.3321/j.issn:1000-3851.2001.02.025
    TINA O, ABBAS S. A highly interpretable materials informatics approach for predicting microstructure-property relationship in fabric composites[J]. Composites Science and Technology,2022,217:109080. doi: 10.1016/j.compscitech.2021.109080
    高旭东, 马贵春, 姚君. 三维机织复合材料力学性能研究[J]. 机械工程与自动化, 2013(2):220-221. doi: 10.3969/j.issn.1672-6413.2013.03.093

    GAO Xudong, MA Guichun, YAO Jun. Study on mechanical properties of 3D woven composites[J]. Mechanical Engi-neering & Automation,2013(2):220-221(in Chinese). doi: 10.3969/j.issn.1672-6413.2013.03.093
    ZHOU C W. Micro mechanical model of 3D woven compo-sites[J]. Chinese Journal of Aeronautics,2005,18(1):40-46. doi: 10.1016/S1000-9361(11)60280-X
    LI D S, DANG M G, JIANG L. Elevated temperature effect on tension fatigue behavior and failure mechanism of carbon/epoxy 3D angle-interlock woven composites[J]. Composite Structures,2021,268:113897. doi: 10.1016/j.compstruct.2021.113897
    SCIDA D, ABOURA Z, BENZEGGAGH M L, et al. Prediction of the elastic behaviour of hybrid and non-hybrid woven composites[J]. Composites Science and Technology,1998,57(12):1727-1740. doi: 10.1016/S0266-3538(97)00105-X
    SCIDA D, ABOURA Z, BENZEGGAGH M L, et al. A micromechanics model for 3D elasticity and failure of woven-fibre composite materials[J]. Composites Science and Technology,1999,59(4):505-517. doi: 10.1016/S0266-3538(98)00096-7
    LEISCHNER U, JONHSON A F. Micromechanics analysis of hybrid woven fabric composites under tensile and compression load[J]. Composite Material Technology,1994,4:397-405.
    DONADON M V, FALZON B G, IANNUCCI L, et al. A 3D micromechanical model for predicting the elastic behaviour of woven laminates[J]. Composites Science and Technology,2007,67:2467-2477. doi: 10.1016/j.compscitech.2006.12.019
    陈继刚, 薛亚红, 闫世程. 二维机织复合材料弹性常数的有限元法预测[J]. 复合材料学报, 2016, 33(8):1702-1709.

    CHEN Jigang, XUE Yahong, YAN Shicheng. Finite element prediction of elastic constants for 2D woven fabric compo-site[J]. Acta Materiae Compositae Sinica,2016,33(8):1702-1709(in Chinese).
    易洪雷, 丁辛. 三维机织复合材料的弹性性能预报模型[J]. 力学学报, 2003, 35(5):569-577. doi: 10.3321/j.issn:0459-1879.2003.05.008

    YI Honglei, DING Xin. A model to predict elastic properties of 3D woven composites[J]. Acta Mechanic Sinica,2003,35(5):569-577(in Chinese). doi: 10.3321/j.issn:0459-1879.2003.05.008
    王立朋, 燕瑛. 编织复合材料弹性性能的细观分析及试验研究[J]. 复合材料学报, 2004, 21(4):152-156. doi: 10.3321/j.issn:1000-3851.2004.04.030

    WANG Lipeng, YAN Ying. Micro analysis and experimental study of the elastic properties of braided composites structure[J]. Acta Materiae Compositae Sinica,2004,21(4):152-156(in Chinese). doi: 10.3321/j.issn:1000-3851.2004.04.030
    ZHOU Guangming, ZHOU Chuwei, WANG Xinfeng. Micro mechanical analysis of 3D woven composites[J]. Transactions of Nanjing University of Aeronautics & Astronautics,2004,21(3):163-167.
    余育苗, 王肖钧, 李永池, 等. 三维正交机织复合材料的单胞模型及应用[J]. 复合材料学报, 2009, 26(4):181-185. doi: 10.3321/j.issn:1000-3851.2009.04.032

    YU Yumiao, WANG Xiaojun, LI Yongchi, et al. Cell model of 3D orthogonal woven composite and its application[J]. Acta Materiae Compositae Sinica,2009,26(4):181-185(in Chinese). doi: 10.3321/j.issn:1000-3851.2009.04.032
    郑君, 温卫东, 崔海涛, 等. 2.5维机织结构复合材料的几何模型[J]. 复合材料学报, 2008, 25(2):143-148. doi: 10.3321/j.issn:1000-3851.2008.02.024

    ZHENG Jun, WEN Weidong, CUI Haitao, et al. Geometric model of 2.5 dimensional woven structures[J]. Acta Materiae Compositae Sinica,2008,25(2):143-148(in Chinese). doi: 10.3321/j.issn:1000-3851.2008.02.024
    梁仕飞, 矫桂琼, 王波. 三维机织C/C-SiC复合材料弹性性能预测[J]. 复合材料学报, 2011, 28(1):138-142.

    LIANG Shifei, JIAO Guiqiong, WANG Bo. Prediction of elastic properties of three dimensional woven C/C-SiC composite[J]. Acta Materiae Compositae Sinica,2011,28(1):138-142(in Chinese).
    顾卫平, 徐斌, 张雪雯. 基于均匀化方法的三维正交机织复合材料弹性性能预测[J]. 机械科学与技术, 2013, 32(12):1785-1788.

    GU Weiping, XU Bin, ZHANG Xuewen. Prediction of the elastic property of 3D woven composites based on the homogenization method[J]. Mechanical Science and Technology for Aerospace Engineering,2013,32(12):1785-1788(in Chinese).
    边天涯, 关志东, 刘发齐, 等. 含孔隙基体缎纹编织复合材料面内压缩弹性性能预报[J]. 北京航空航天大学学报, 2016, 42(5):1016-1024.

    BIAN Tianya, GUAN Zhidong, LIU Faqi, et al. Prediction on in-plane compression elastic properties of satin weave composites with pore matrix[J]. Journal of Beijing University of Aeronautics and Astronautics,2016,42(5):1016-1024(in Chinese).
    LI Z G, LI D S, ZHU H, et al. Mechanical properties prediction of 3D angle-interlock woven composites by finite element modeling method[J]. Materials Today Communications,2020,22:100769. doi: 10.1016/j.mtcomm.2019.100769
    ZHAO C Q, LI D S, GE T Q, et al. Experimental study on the compression properties and failure mechanism of 3D integrated woven spacer composites[J]. Materials & Design,2014,56:50-59.
    LI S, ZHOU C, YU H, et al. Formulation of a unit cell of a reduced size for plain weave textile composites[J]. Computational Materials Science,2011,50(5):1770-1780. doi: 10.1016/j.commatsci.2011.01.013
    NAIK N K, SHEMBEKAR P S. Elastic behavior of woven fabric composites: I—Lamina analysis[J]. Journal of Compo-site Materials,1992,26(15):2196-2225. doi: 10.1177/002199839202601502
    沈观林, 胡更开. 复合材料力学[M]. 北京: 清华大学出版社, 2006: 86-91.

    SHEN Guanlin, HU Gengkai. Mechanics of composite materials[M]. Beijing: Tsinghua University Press, 2006: 86-91(in Chinese).
    朱俊, 郭万涛, 李想, 等. 含面内波纹缺陷的复合材料层合板刚度性能[J]. 复合材料学报, 2018, 35(4):793-803.

    ZHU Jun, GUO Wantao, LI Xiang, et al. Stiffness of compo-site laminates with in-plane waviness defect[J]. Acta Materiae Compositae Sinica,2018,35(4):793-803(in Chinese).
    LI S. General unit cells for micromechanical analyses of unidirectional composites[J]. Composites Part A: Applied Science and Manufacturing,2001,32(6):815-826. doi: 10.1016/S1359-835X(00)00182-2
  • 加载中


    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(4)  / Tables(8)

    Article Metrics

    Article views (1038) PDF downloads(106) Cited by()
    Proportional views


    DownLoad:  Full-Size Img  PowerPoint