Preparation and thermophysical properties of hexagonal boron nitride-cubic boron nitride/epoxy composites

GAO Lida; LI Xiang; ZHANG Xiaozhong; HU Zongjie; YANG Xueming

doi:10.13801/j.cnki.fhclxb.20210819.005

Volume 39 Issue 6

Jun. 2022

Turn off MathJax

Article Contents

Article Navigation > Acta Materiae Compositae Sinica > 2022 > 39(6): 2599-2606

GAO Lida, LI Xiang, ZHANG Xiaozhong, et al. Preparation and thermophysical properties of hexagonal boron nitride-cubic boron nitride/epoxy composites[J]. Acta Materiae Compositae Sinica, 2022, 39(6): 2599-2606. doi: 10.13801/j.cnki.fhclxb.20210819.005

Citation:

GAO Lida, LI Xiang, ZHANG Xiaozhong, et al. Preparation and thermophysical properties of hexagonal boron nitride-cubic boron nitride/epoxy composites[J]. Acta Materiae Compositae Sinica, 2022, 39(6): 2599-2606. doi: 10.13801/j.cnki.fhclxb.20210819.005

Citation:

PDF( 7919 KB)

Preparation and thermophysical properties of hexagonal boron nitride-cubic boron nitride/epoxy composites

doi: 10.13801/j.cnki.fhclxb.20210819.005

School of Energy Power and Mechanical Engineering, North China Electric Power University, Baoding 071000, China

Received Date: 2021-05-28
Accepted Date: 2021-08-09
Rev Recd Date: 2021-08-01

Available Online: 2021-08-20

Publish Date: 2022-06-01

Abstract

Abstract

Epoxy resin (EP) has low thermal conductivity, and EP-based insulate equipments will failure due to their poor heat dissipation and heat re-sistance in long-term use. A composite insulating material with high heat resistance and high thermal conductivity was prepared by adding micron boron nitride (BN) to EP, and the thermal conductivity and heat resistance of the composite material were studied. The results show that when the mass fraction of hexagonal boron nitride (hBN) is 30wt%, the thermal conductivity of the composite is 0.444 W/(m·K), which is 2.3 times that of pure EP. When the filler mass fraction is 30wt%, the thermal conductivity of the composite mater-ial prepared by using KH560 modified hBN is 0.456 W/(m·K), which is slightly higher than that of the unmodified material. For the hBN-cBN/EP hot-pressed composite material, when the filler mass fraction is 30wt%, the in-plane thermal conductivity is 1.32 W/(m·K), which is much greater than the normal thermal conductivity. The hBN/EP composite materials with two particle sizes (1, 5-10 μm) were prepared by blending. The results show that filler blending can significantly improve the heat resistance of the material. Two cubic boron nitride (cBN) with two particle sizes (1, 5-10 μm) were added to prepare composite materials and their hot-pressed composite materials. The results show that the addition of cBN and hot-pressing can improve the heat resistance of the composite materials.
- epoxy resin,
- boron nitride,
- cubic boron nitride,
- heat resistance,
- hot press
Long Abstrsct
Innovation Points

FullText(HTML)

References(24)

References

[1]	张新娜, 刘成莉, 李娟, 等. 填充型树脂基导热绝缘复合材料的研究及应用进展[J]. 绝缘材料, 2015, 48(3):8-11. doi: 10.3969/j.issn.1009-9239.2015.03.003 ZHANG Xinna, LIU Chengli, LI Juan, et al. Research and application progress of filled resin-based thermally conductive and insulating composite materials[J]. Insulating Materials,2015,48(3):8-11(in Chinese). doi: 10.3969/j.issn.1009-9239.2015.03.003
[2]	贾园, 师瑞峰, 呼雪, 等. 导热环氧树脂复合材料研究进展[J]. 工程塑料应用, 2020, 48(4):139-143, 149. doi: 10.3969/j.issn.1001-3539.2020.04.024 JIA Yuan, SHI Ruifeng, HU Xue, et, al. Research progress of thermally conductive epoxy resin composite materials[J]. Engineering Plastics Application,2020,48(4):139-143, 149(in Chinese). doi: 10.3969/j.issn.1001-3539.2020.04.024
[3]	曹文斌. 环氧树脂绝缘件在电力设备中的应用[J]. 电气制造, 2009(12):28-29. doi: 10.3969/j.issn.1673-5471.2009.12.010 CAO Wenbin. The application of epoxy resin insulation in power equipment[J]. Electrical Manufacturing,2009(12):28-29(in Chinese). doi: 10.3969/j.issn.1673-5471.2009.12.010
[4]	YU W, FU J, CHEN L, et al. Enhanced thermal conductive property of epoxy composites by low mass fraction of organic-inorganic multilayer covalently grafted carbon nano-tubes[J]. Composites Science & Technology,2016,125:90-99.
[5]	HUANG X, JIANG P, TANAKA T. A review of dielectric polymer composites with high thermal conductivity[J]. IEEE Electrical Insulation Magazine,2011,27(4):8-16. doi: 10.1109/MEI.2011.5954064
[6]	王立国, 高巍, 张昕, 等. 高导热环氧树脂复合绝缘材料的制备与性能研究[J]. 绝缘材料, 2021, 54(2):20-26. WANG Liguo, GAO Wei, ZHANG Xin, et al. Preparation and performance study of high thermal conductivity epoxy re-sin composite insulating material[J]. Insulating Materials,2021,54(2):20-26(in Chinese).
[7]	ISLAM A M, LIM H J, YOU N H, et al. Enhanced thermal conductivity of liquid crystalline epoxy resin using controlled linear polymerization[J]. ACS Macro Letters,2018,7:1180-1185. doi: 10.1021/acsmacrolett.8b00456
[8]	FUKUSHIMA K, TAKAHASHI H, TAKEZAWA Y et al. Thermal conductive epoxy resins with controlled high-order structure[C]. The 17th Annual meeting of the IEEE lasers and Electro-optics society, 2003 LEOS 2004. New York: IEEE, 2004: 340–343.
[9]	GUO H, ZHENG J, GAN J, et al. High thermal conductivity epoxies containing substituted biphenyl mesogenic[J]. Journal of Materials Science Materials in Electronics,2016,27(3):2754-2759. doi: 10.1007/s10854-015-4087-8
[10]	周宏, 朴明昕, 李芹, 等. 氧化石墨烯纳米片/环氧树脂复合材料的制备与性能[J]. 复合材料学报, 2015, 32(5):1309-1315. ZHOU Hong, PU Mingxin, LI Qin, et al. Preparation and properties of graphene oxide nanosheets/epoxy resin composites[J]. Acta Materiae Compositae Sinica,2015,32(5):1309-1315(in Chinese).
[11]	汪蔚, 曹万荣, 陈婷婷. BN表面改性对BN/环氧树脂复合材料导热性能的影响[J]. 复合材料学报, 2018, 35(2):275-281. WANG Wei, CAO Wanrong, CHEN Tingting. Effect of BN surface modification on thermal conductivity of BN/epoxy composites[J]. Acta Materiae Compositae Sinica,2018,35(2):275-281(in Chinese).
[12]	HUANG X, JIANG P, XIE L. Ferroelectric polymer/silver nanocomposites with high dielectric constant and high thermal conductivity[J]. Applied Physics Letters,2009,95(24):014105.
[13]	MAMUNYA P, DAVYDENKOV, PISSIS P, et al. Electrical and thermal conductivity of polymers filled with metal powders[J]. European Polymer Journal,2002,38(9):1887-1897. doi: 10.1016/S0014-3057(02)00064-2
[14]	GONON P, BOUDEFEL A. Electrical properties of epoxy/silver nanocomposites[J]. Journal of Applied Physics,2006,99(2):9.
[15]	GE J, TURUNEN M, KIVILAHTI J K. Surface modification and characterization of photo definable epoxy/copper systems[J]. Thin Solid Films,2003,440(1-2):198-207.
[16]	王亮亮, 陶国良. 聚丙烯/铝粉复合材料导热性能的研究[J]. 塑料工业, 2003, 31(12):47-48, 54. doi: 10.3321/j.issn:1005-5770.2003.12.015 WANG Liangliang, TAO Guoliang. Research on the thermal conductivity of polypropylene/aluminum powder compo-sites[J]. Plastics Industry,2003,31(12):47-48, 54(in Chinese). doi: 10.3321/j.issn:1005-5770.2003.12.015
[17]	ZUNJARRAO S C, SINGH R P. Characterization of the fracture behavior of epoxy reinforced with nanometer and micrometer sized aluminum particles[J]. Composites Science & Technology,2006,66(13):2296-2305.
[18]	丁峰, 谢维章. 导热树脂基复合材料[J]. 复合材料学报, 1993, 10(3):19-24. DING Feng, XIE Weizhang. Thermally conductive resin-based composite materials[J]. Acta Materiae Compositae Sinica,1993,10(3):19-24(in Chinese).
[19]	陆绍荣, 王霞瑜, 张海良, 等. 环氧树脂/无机纳米复合材料的研究进展[J]. 绝缘材料, 2003, 36(2):13-16. doi: 10.3969/j.issn.1009-9239.2003.02.006 LU Shaorong, WANG Xiayu, ZHANG Hailiang, et al. Research progress of epoxy resin/inorganic nanocomposite materials[J]. Insulating Materials,2003,36(2):13-16(in Chinese). doi: 10.3969/j.issn.1009-9239.2003.02.006
[20]	文放, 孙玉昭, 赵微, 等. 不同功能化碳纳米管对环氧树脂复合材料性能的影响[J]. 塑料, 2020, 49(6):42-44, 49. WEN Fang, SUN Yuzhao, ZHAO Wei, et al. Effects of different functionalized carbon nanotubes on the properties of epoxy resin composites[J]. Plastics,2020,49(6):42-44, 49(in Chinese).
[21]	时圣波, 梁军, 方国东. 热物理性能对高硅氧/酚醛复合材料烧蚀性能的影响[J]. 固体火箭技术, 2011, 34(3):354-359. doi: 10.3969/j.issn.1006-2793.2011.03.019 SHI Shengbo, LIANG Jun, FANG Guodong. Effect of thermophysical properties on ablation properties of high silica/phenolic composites[J]. Solid Rocket Technology,2011,34(3):354-359(in Chinese). doi: 10.3969/j.issn.1006-2793.2011.03.019
[22]	YU J, HUANG X, WU C, et al. Interfacial modification of boron nitride nanoplatelets for epoxy composites with improved thermal properties[J]. Polymer,2012,53:471-480. doi: 10.1016/j.polymer.2011.12.040
[23]	ZENG X, YU S, SUN R. Thermal behavior and dielectric property analysis of boron nitride-filled bismaleimide-triazine resin composites[J]. Journal of Applied Polymer Science,2013,128(3):1353-1359.
[24]	AGARI Y, TANAKA M, NAGAI S, et al. Thermal conductivity of a polymer composite filled with mixtures of particles[J]. Journal of Applied Polymer Science,1987,34(4):1429-1437. doi: 10.1002/app.1987.070340408