Composition design of excess-sulfate phosphogypsum slag cement based on molecular dynamics simulation

XU Fang; LI Heng; SUN Tao; SHUI Zhonghe; DING Chao

doi:10.13801/j.cnki.fhclxb.20210816.005

Volume 39 Issue 6

Jun. 2022

Turn off MathJax

Article Contents

Article Navigation > Acta Materiae Compositae Sinica > 2022 > 39(6): 2821-2828

XU Fang, LI Heng, SUN Tao, et al. Composition design of excess-sulfate phosphogypsum slag cement based on molecular dynamics simulation[J]. Acta Materiae Compositae Sinica, 2022, 39(6): 2821-2828. doi: 10.13801/j.cnki.fhclxb.20210816.005

Citation:

XU Fang, LI Heng, SUN Tao, et al. Composition design of excess-sulfate phosphogypsum slag cement based on molecular dynamics simulation[J]. Acta Materiae Compositae Sinica, 2022, 39(6): 2821-2828. doi: 10.13801/j.cnki.fhclxb.20210816.005

Citation:

PDF( 3936 KB)

Composition design of excess-sulfate phosphogypsum slag cement based on molecular dynamics simulation

doi: 10.13801/j.cnki.fhclxb.20210816.005

XU Fang^1
,,
LI Heng¹,
SUN Tao^{2
,
,},
SHUI Zhonghe²,
DING Chao²

1.
Faculty of Engineering, China University of Geosciences, Wuhan 430074, China
2.
State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, Wuhan 430070, China

Received Date: 2021-05-17
Accepted Date: 2021-07-30
Rev Recd Date: 2021-07-29

Available Online: 2021-08-17

Publish Date: 2022-06-01

Abstract

Abstract

Chemical composition design of raw materials is the basis of hydration reaction and mechanical strength formation of excess-sulfate phosphorgypsum slag cement (PPSC). Laboratory experiments and molecular dynamics simulation (MD) provide a multi-scale regulation and control design basis for chemical composition of PPSC raw materials. The structural model of the PPSC was established by Materials Studio (MS). The effect of the molar ratios of chemical components on the compressive strength of PPSC was studied by means of MD simulation and XRD. The results show that with the increase of the CaO/SO₃ molar ratio and the decrease of SiO₂/Al₂O₃, the compressive strength of PPSC shows an increasing trend. When the SiO₂/Al₂O₃ molar ratio is 3.5-3.7 and the CaO/SO₃ molar ratio is 1.8~2.0, the compressive strength of PPSC is higher. The MD simulation result of PPSC pore structure is contrary to the compressive strength test result, which proves the reliability of the simulation result. At the atomic scale, MD simulation shows that O, Ca, Al and S atoms exhibit high diffusion ability. In the alkaline environment, sulphate activation increases the bond length of S=O, Al—O and O=O, and the structure is unstable and hydrolyzed, resulting in more ettringite that promotes strength. By adjusting the raw materials SiO₂/Al₂O₃ molar ratio and CaO/SO₃ molar ratio, PPSC can form a more stable internal structure. The design of chemical composition molar ratio and MD simulation methods are of great significance for the composition design and application promotion of PPSC.
- excess-sulfate phosphogypsum slag cement,
- molecular dynamics simulation,
- molar ratio,
- chemical components,
- compressive strength
Long Abstrsct
Innovation Points

FullText(HTML)

References(23)

References

[1]	林宗寿, 黄赟. 磷石膏基免煅烧水泥的开发研究[J]. 武汉理工大学学报, 2009, 31(4):53-55. doi: 10.3963/j.issn.1671-4431.2009.04.015 LIN Z S, HUANG Y. Investigation on phosphogypsumbase non-calcined cement[J]. Journal of Wuhan University of Technology,2009,31(4):53-55(in Chinese). doi: 10.3963/j.issn.1671-4431.2009.04.015
[2]	林宗寿, 黄赟, 水中和. 过硫磷石膏矿渣水泥与混凝土[M]. 武汉: 武汉理工大学出版社, 2015. LIN Z S, HUANG Y, SHUI Z H. Excess-sulfate phosphogypsum slag cement and concrete[M]. Wuhan: WUTP Wuhan University of Technology Press, 2015(in Chinese).
[3]	黎良元, 石宗利, 艾永平. 石膏-矿渣胶凝材料的碱性激发作用[J]. 硅酸盐学报, 2008, 36(3):405-410. doi: 10.3321/j.issn:0454-5648.2008.03.028 LI L Y, SHI Z L, AI Y P. Alkaline activation of gypsum-granulated blast furnace slag cementing materials[J]. Journal of the Chinese Ceramic Society,2008,36(3):405-410(in Chinese). doi: 10.3321/j.issn:0454-5648.2008.03.028
[4]	吕洁. 改性磷石膏对水泥性能影响的试验研究[J]. 水泥, 2008(9):4-6. doi: 10.3969/j.issn.1002-9877.2008.09.002 LV J. Effect of modified phosphogypusum on cement performance[J]. Cement,2008(9):4-6(in Chinese). doi: 10.3969/j.issn.1002-9877.2008.09.002
[5]	彭家惠, 彭志辉, 张建新, 等. 磷石膏中可溶磷形态、分布及其对性能影响机制的研究[J]. 硅酸盐学报, 2000, 28(4):309-313. doi: 10.3321/j.issn:0454-5648.2000.04.003 PENG J H, PENG Z H, ZHANG J X, et al. Study on the form and distribution of water-soluble P₂O₅ in phosphogypusum and effective mechanism of properties[J]. Journal of the Chinese Ceramic Society,2000,28(4):309-313(in Chinese). doi: 10.3321/j.issn:0454-5648.2000.04.003
[6]	彭家惠, 万体智, 汤玲, 等. 磷石膏中的有机物、共晶磷及其对性能的影响[J]. 建筑材料学报, 2003, 6(4):221-226. PENG J H, WAN T Z, TANG L, et al. Organic matters and P₂O₅ in crystal lattice and their influence on properties of phosphogypsum[J]. Journal of Building Materials,2003,6(4):221-226(in Chinese).
[7]	REIJNDERS L. Cleaner phosphogypsum, coalcombustion ashes and waste incineration ashes for application in building materials: A review[J]. Building and Environment,2007,42(2):1036-1042. doi: 10.1016/j.buildenv.2005.09.016
[8]	林宗寿, 黄赟. 碱度对磷石膏基免煅烧水泥性能的影响[J]. 武汉理工大学学报, 2009, 31(4):132-135. doi: 10.3963/j.issn.1671-4431.2009.04.036 LIN Z S, HUANG Y. Effect of alkalinity on phosphogypsum-base non-calcined cement[J]. Journal of Wuhan University of Technology,2009,31(4):132-135(in Chinese). doi: 10.3963/j.issn.1671-4431.2009.04.036
[9]	徐玲琳, 周向艺, 李楠, 等. 石膏对硫铝酸盐水泥水化特性的影响[J]. 同济大学学报(自然科学版), 2017, 45(6):885-890. XU L L, ZHOU X Y, LI N, et al. Impact of calcium sulfate on hydration features of calcium sulfoaluminate cement[J]. Journal of Tongji University (Natural Science),2017,45(6):885-890(in Chinese).
[10]	王善拔, 季尚行, 刘银江, 等. 碱对硫铝酸盐水泥膨胀性能的影响[J]. 硅酸盐学报, 1986, 14(3):285-292. WANG S B, JI S H, LIU Y J, et al. Effect of alkali on expansion of sulfoaluminate cement[J]. Journal of the Chinese Ceramic Society,1986,14(3):285-292(in Chinese).
[11]	赵士豪, 林喜华, 麻鹏飞, 等. 基于临界钙矾石膨胀破坏的磷石膏基复合胶凝材料的配料计算研究[J]. 无机盐工业, 2020, 52(9):91-95. doi: 10.11962/1006-4990.2019-0518 ZHAO S H, LIN X H, MA P F, et al. Study on formulation calculation of phosphogypsum-based composite cementitious materials based on expansion and failure of critical AFt[J]. Inorganic Chemicals Industry,2020,52(9):91-95(in Chinese). doi: 10.11962/1006-4990.2019-0518
[12]	方永浩, 朱琦, 岑奕侃, 等. 大掺量超细矿渣粉水泥基胶凝材料的性能与结构及磷石膏的影响[J]. 硅酸盐学报, 2008, 36(4):444-450. doi: 10.3321/j.issn:0454-5648.2008.04.004 FANG Y H, ZHU Q, CEN Y K, et al. Properties and structure of high volume superfine blast furnace slag powder cementing materials and the effect of phosphorous gypsum addition[J]. Journal of the Chinese Ceramic Society,2008,36(4):444-450(in Chinese). doi: 10.3321/j.issn:0454-5648.2008.04.004
[13]	国家质量技术监督局. 水泥胶砂强度检验方法: GB/T 17671—1999[S]. 北京: 中国标准出版社, 1999. The State Bureau of Quality and Technical Supervision. Method of testing cements determination of strength: GB/T 17671—1999[S]. Beijing: China Standards Press, 1999(in Chinese).
[14]	兰明章, 唐润荣, 陈智丰, 等. 二氧化硅含量对硫铝酸盐水泥性能的影响[J]. 新世纪水泥导报, 2002(4):33-36. doi: 10.3969/j.issn.1008-0473.2002.04.010 LAN M Z, TANG R R, CHEN Z F, et al. Effect of silicon dioxide content on properties of sul-phoaluminate cement[J]. Cement Guide for New Epoch,2002(4):33-36(in Chinese). doi: 10.3969/j.issn.1008-0473.2002.04.010
[15]	HUANG Y B, QIAN J S, LU L C, et al. Phosphogypsum as a component of calcium sulfoaluminatecement: Hazardous elements immobilization, radioactivity and performances[J]. Journal of Cleaner Production,2020,248:119287. doi: 10.1016/j.jclepro.2019.119287
[16]	HUANG S J. Mechanical properties of hydrated calcium silicate simulated by molecular dynamics[J]. Bulletin of the Chinese Ceramic Society,2018,37(5):1687-1692.
[17]	王晴, 康升荣, 吴丽梅, 等. 地聚合物凝胶结构建模及分子动力学模拟[J]. 材料导报, 2020, 34(2):56-61. WANG Q, KANG S R, WU L M, et al. Structural modeling and molecular dynamics simulation of geopolymers gel[J]. Materials Reports,2020,34(2):56-61(in Chinese).
[18]	周宇, 徐方, 顾功辉, 等. 地聚合物早期力学性能及分子动力学模拟研究[J]. 建筑材料学报, 2021, 24(1):93-98. doi: 10.3969/j.issn.1007-9629.2021.01.013 ZHOU Y, XU F, GU G H, et al. Early compressive strength and molecular dynamics simulation of geopolymer[J]. Journal of Building Materials,2021,24(1):93-98(in Chinese). doi: 10.3969/j.issn.1007-9629.2021.01.013
[19]	CHEN B M, QIAO G, HOU D S, et al. Cement-based material modified by in-situ polymerization: From experiments to molecular dynamics investigation[J]. Composites Part B: Engineering,2020,194:108036. doi: 10.1016/j.compositesb.2020.108036
[20]	POWERS T C, BROWNYARD T L. Studies of the physical properties of hardened Portland cement paste[J]. ACI Structural Journal,1947,43(9):845-880.
[21]	RYSHKEWITCH E. Compression strength of porous sintered alumina and zirconia[J]. Journal of the American Ceramic Society,1953,36(2):65-68. doi: 10.1111/j.1151-2916.1953.tb12837.x
[22]	SCHILLER K K. Strength of porous materials[J]. Cement and Concrete Research,1971,1(4):419-422. doi: 10.1016/0008-8846(71)90035-4
[23]	HOU D S, LI T, WANG P. Molecular dynamics study on the structure and dynamics of NaCl solution transport in the nanometer channel of CASH gel[J]. ACS Sustainable Chemistry & Engineering,2018,6:9498-9509.