Citation: | LI Zhongming, LI Bin, FENG Dong, et al. Research progress of cathode materials for lithium-ion battery[J]. Acta Materiae Compositae Sinica, 2022, 39(2): 513-527. doi: 10.13801/j.cnki.fhclxb.20210708.002 |
[1] |
CHENG Q, HE W, ZHANG X, et al. Modification of Li2MnSiO4 cathode materials for lithium-ion batteries: A review[J]. Journal of Materials Chemistry A,2017,5(22):10772-10797. doi: 10.1039/C7TA00034K
|
[2] |
ZHANG L, WANG H, WANG L, et al. High electrochemical performance of lithium-rich Li1.2Mn0.54NixCoyO2 cathode materials for lithium-ion batteries[J]. Materials Letters,2016,185:100-103. doi: 10.1016/j.matlet.2016.08.118
|
[3] |
GANDOMAN F H, JAGUEMONT J, GOUTAM S, et al. Concept of reliability and safety assessment of lithium-ion batteries in electric vehicles: Basics, progress, and challenges[J]. Applied Energy,2019,251:113343. doi: 10.1016/j.apenergy.2019.113343
|
[4] |
KHARBACHI A, ZAVOROTYNSKA O, LATROCHE M, et al. Exploits, advances and challenges benefiting beyond Li-ion battery technologies[J]. Journal of Alloys and Compounds,2020,817:153261. doi: 10.1016/j.jallcom.2019.153261
|
[5] |
CHEN R, ZHAO T, ZHANG X, et al. Advanced cathode materials for lithium-ion batteries using nanoarchitectonics[J]. Nanoscale Horizons,2016,1(6):423-444. doi: 10.1039/C6NH00016A
|
[6] |
ZHENG F, YANG C, XIONG X, et al. Nanoscale surface modification of lithium-rich layered-oxide composite cathodes for suppressing voltage fade[J]. Angewandte Chemie International Edition,2015,54(44):13058-13062. doi: 10.1002/anie.201506408
|
[7] |
CHENG F, CHEN J. Metal-air batteries: From oxygen reduction electrochemistry to cathode catalysts[J]. Chemical Society Reviews,2012,41(6):2172-2192. doi: 10.1039/c1cs15228a
|
[8] |
ALABOINA P K, UDDIN M J, CHO S J. Nanoprocess and nanoscale surface functionalization on cathode materials for advanced lithium-ion batteries[J]. Nanoscale,2017,9(41):15736-15752. doi: 10.1039/C7NR02600E
|
[9] |
GUAN P, ZHOU L, YU Z, et al. Recent progress of surface coating on cathode materials for high-performance lithium-ion batteries[J]. Journal of Energy Chemistry,2020,43:220-235. doi: 10.1016/j.jechem.2019.08.022
|
[10] |
ISLAM M. S, FISHER C. A. J. Lithium and sodium battery cathode materials: Computational insights into voltage, diffusion and nanostructural properties[J]. Chemical Society Reviews,2014,43(1):185-204. doi: 10.1039/C3CS60199D
|
[11] |
ZHU P, GASTOL D, MARSHALL J, et al. A review of current collectors for lithium-ion batteries[J]. Journal of Power Sources,2021,485:229321. doi: 10.1016/j.jpowsour.2020.229321
|
[12] |
HUANG B, PAN Z, SU X, et al. Recycling of lithium-ion batteries: Recent advances and perspectives[J]. Journal of Power Sources,2018,399:274-286. doi: 10.1016/j.jpowsour.2018.07.116
|
[13] |
HSIEH C, HSU H, HSU J, et al. Infrared-assisted synthesis of lithium nickel cobalt alumina oxide powders as electrode material for lithium-ion batteries[J]. Electrochimica Acta,2016,206:207-216. doi: 10.1016/j.electacta.2016.04.146
|
[14] |
LI W. Review—An unpredictable hazard in lithium-ion batteries from transition metal ions: Dissolution from cathodes, deposition on anodes and elimination strategies[J]. Journal of The Electrochemical Society,2020,167:090514. doi: 10.1149/1945-7111/ab847f
|
[15] |
MIZUSHIMA K, JONES P C, WISEMAN P J, et al. LiXCoO2 "(oless-thanxless-than-or-equal-to1)-A new cathode material for batteries of high-energy density[J]. Materials Research Bulletin,1980,15:783-789. doi: 10.1016/0025-5408(80)90012-4
|
[16] |
LIU X, TAN Y, WANG W, et al. Conformal prelithiation nanoshell on LiCoO2 enabling high-energy lithium-ion batteries[J]. Nano Letters,2020,20(6):4558-4565. doi: 10.1021/acs.nanolett.0c01413
|
[17] |
LYU Y, WU X, WANG K, et al. An overview on the advances of LiCoO2 cathodes for lithium-ion batteries[J]. Advanced Energy Materials,2021,11:2000982. doi: 10.1002/aenm.202000982
|
[18] |
JI X, XIA Q, XU Y, et al. A review on progress of lithium-rich manganese-based cathodes for lithium ion batteries[J]. Journal of Power Sources,2021,487:229362. doi: 10.1016/j.jpowsour.2020.229362
|
[19] |
ZHU J, CAO G, LI Y, et al. Efficient utilisation of rod-like nickel oxalate in lithium-ion batteries: A case of NiO for the anode and LiNiO2 for the cathode[J]. Scripta Materialia,2020,178:51-56. doi: 10.1016/j.scriptamat.2019.10.051
|
[20] |
KALYANI P, KALAISELVI N. Various aspects of LiNiO2 chemistry: A review[J]. Science and Technology of Advanced Materials,2005,6:689-703. doi: 10.1016/j.stam.2005.06.001
|
[21] |
BIANCHINI M, ROCA-AYATS M, HARTMANN P, et al. There and back again-The journey of LiNiO2 as a cathode active material[J]. Angewandte Chemie-International Edition,2019,58:10434-10458. doi: 10.1002/anie.201812472
|
[22] |
VLIKANGAS J, LAINE P, HIETANIEMI M, et al. Precipitation and calcination of high-capacity LiNiO2 cathode material for lithium-ion batteries[J]. Applied Sciences,2020,10:8988. doi: 10.3390/app10248988
|
[23] |
ZHU X, LIN T, ERIC M, et al. Recent advances on Fe- and Mn-based cathode materials for lithium and sodium ion batteries[J]. Journal of Nanoparticle Research,2018,20:160-200. doi: 10.1007/s11051-018-4235-1
|
[24] |
YU R, ZHANG X, LIU T, et al. Spinel/layered heterostructured lithium-rich oxide nanowires as cathode material for high-energy lithium-ion batteries[J]. ACS Applied Materials & Interfaces,2017,9:41210-41223.
|
[25] |
ZHU X, MENG F, ZHANG Q, et al. LiMnO2 cathode stabilized by interfacial orbital ordering for sustainable lithium-ion batteries[J]. Nature Sustainability,2020,4(5):392-401.
|
[26] |
TIAN Y, QIU Y, LIU Z, et al. LiMnO2@rGO nanocomposites for high-performance lithium-ion battery cathodes[J]. Nanotechnology,2020,32:015042.
|
[27] |
SUSAI F A, TALIANKER M, LIU J, et al. Electrochemical activation of Li2MnO3 electrodes at 0 degrees C and its impact on the subsequent performance at higher tempera-tures[J]. Materials,2020,13:4388. doi: 10.3390/ma13194388
|
[28] |
VEENA R, DINESH J A, RAMAN S, et al. Li and Mn-rich Li4Mn5O12-Li2MnO3 composite cathode for next generation lithium-ion batteries[J]. Journal of Energy Storage,2019,24:100754. doi: 10.1016/j.est.2019.04.028
|
[29] |
SAROHA R, PANWAR A K, GAUR A, et al. Electrochemical studies of novel olivine-layered (LiFePO4-Li2MnO3) dual composite as an alternative cathode material for lithium-ion batteries[J]. Journal of Solid State Electrochemistry,2018,22:2507-2513. doi: 10.1007/s10008-018-3963-6
|
[30] |
LIU D, SU Z, WANG L. Pyrometallurgically regenerated LiMn2O4 cathode scrap material and its electrochemical properties[J]. Ceramics International,2021,47:42-47. doi: 10.1016/j.ceramint.2020.06.037
|
[31] |
ISHIZAWA N, TATEISHI K. Diffusion of Li atoms in LiMn2O4-A structural point of view[J]. Journal of the Ceramic Society of Japan,2009,117(1361):6-14. doi: 10.2109/jcersj2.117.6
|
[32] |
LUO F, WEI C, ZHANG C, et al. Operando X-ray diffraction analysis of the degradation mechanisms of a spinel LiMn2O4 cathode in different voltage windows[J]. Journal of Energy Chemistry,2020,44:138-146. doi: 10.1016/j.jechem.2019.09.011
|
[33] |
MARINCAS A, GOGA F, DORNEANU S, et al. Review on synthesis methods to obtain LiMn2O4-based cathode materials for Li-ion batteries[J]. Journal of Solid State Electrochemistry,2020,24:473-497. doi: 10.1007/s10008-019-04467-3
|
[34] |
LIU Y, LIU G, XU H, et al. Low-temperature synthesized Li4Mn5O12-like cathode with hybrid cation- and anion-redox capacities[J]. Chemical Communications,2019,55:8118-8121. doi: 10.1039/C9CC02006C
|
[35] |
ZHANG X, SHI J, LIANG J, et al. Suppressing surface lattice oxygen release of Li-rich cathode materials via heterostructured spinel Li4Mn5O12 coating[J]. Advanced Materials,2018,30:1801751. doi: 10.1002/adma.201801751
|
[36] |
PFLEGING W. Recent progress in laser texturing of battery materials: a review of tuning electrochemical performances, related material development, and prospects for large-scale manufacturing[J]. International Journal of Extreme Manufacturing,2020,3(1):012002. doi: 10.1088/2631-7990/abca84
|
[37] |
AN Q, SUN X, GUO J, et al. Review-key strategies to increase the rate capacity of cathode materials for high power lithium-ion batteries[J]. Journal of The Electrochemical Society,2020,167:140528. doi: 10.1149/1945-7111/abc4bf
|
[38] |
BELHAROUAK I, TSUKAMOTO H, AMINE K. LiNi0.5Co0.5O2 as a long-lived positive active material for lithium-ion batteries[J]. Journal of Power Sources,2003,119:175-177.
|
[39] |
LI B, WU C, HU D, et al. Copper extraction from the ammonia leach liquor of spent lithium ion batteries for regenerating LiNi0.5Co0.5O2 by co-precipitation[J]. Hydrometallurgy,2020,193:105310. doi: 10.1016/j.hydromet.2020.105310
|
[40] |
ZHOU Y, LI H. Sol-gel template synthesis of highly ordered LiCo0.5Mn0.5O2 nanowire arrays and their structural properties[J]. Journal of Solid State Chemistry,2002,165:247-253. doi: 10.1006/jssc.2002.9512
|
[41] |
MYUNG S T, KOMABA S, KUMAGAI N. Hydrothermal synthesis of orthorhombic LiCoxMn1−xO2 and their structural changes during cycling[J]. Journal of The Electrochemical Society,2002,149:A1349-A1357. doi: 10.1149/1.1504453
|
[42] |
WANG H. LiNi0.5Mn1.5O4 cathodes for lithium ion batteries: A review[J]. Journal of Nanoscience and Nanotechnology,2015,15:6883-6890. doi: 10.1166/jnn.2015.10726
|
[43] |
GAO C, LIU H, BI S, et al. Insight into the high-temperature cycling stability of a micro-nanostructured LiNi0.5Mn1.5O4/graphene composite cathode for high-voltage lithium-ion batteries[J]. Journal of Physical Chemistry C,2020,124:18847-18858. doi: 10.1021/acs.jpcc.0c02933
|
[44] |
EIN-ELI Y, HOWARD W F, LU S H, et al. LiMn2−xCu
|
[45] |
YAN W, YANG S, HUANG Y, et al. A review on doping/coating of nickel-rich cathode materials for lithium-ion batteries[J]. Journal of Alloys and Compounds,2019,819:153048.
|
[46] |
ZHAO X, WANG J, DONG X, et al. Structure design and performance of LiNixCoyMn1−x−yO2 cathode materials for lithium-ion batteries: A review[J]. Journal of the Chinese Chemical Society,2014,61:1071-1083. doi: 10.1002/jccs.201400107
|
[47] |
SHUAI H, LI J, HONG W, et al. Electrochemically modulated LiNi1/3Mn1/3Co1/3O2 cathodes for lithium-ion batteries[J]. Small Methods,2019,3:1900065. doi: 10.1002/smtd.201900065
|
[48] |
ZENG T, ZHANG C. An effective way of co-precipitating Ni2+, Mn2+ and Co2+ by using ammonium oxalate as precipitant for Ni-rich Li-ion batteries cathode[J]. Journal of Materials Science,2020,55:11535-11544. doi: 10.1007/s10853-020-04753-w
|
[49] |
WANG Y, CHENG T, YU Z, et al. Study on the effect of Ni and Mn doping on the structural evolution of LiCoO2 under 4.6 V high-voltage cycling[J]. Journal of Alloys and Compounds,2020,842:155827. doi: 10.1016/j.jallcom.2020.155827
|
[50] |
KLEINER K, DIXON D, JAKES P, et al. Fatigue of LiNi0.8Co0.15Al0.05O2 in commercial Li ion batteries[J]. Journal of Power Sources,2015,273:70-82. doi: 10.1016/j.jpowsour.2014.08.133
|
[51] |
SAITO Y, SHIKANO M, KOBAYASHI H. State of charge (SOC) dependence of lithium carbonate on LiNi0.8Co0.15Al0.05O2 electrode for lithium-ion batteries[J]. Journal of Power Sources,2011,196:6889-6892. doi: 10.1016/j.jpowsour.2010.12.098
|
[52] |
WATANABE S, KINOSHITA M, NAKURA K. Capacity fade of LiNi(1−
|
[53] |
LI W, LIU X, CELIO H, et al. Mn versus Al in layered oxide cathodes in lithium-ion batteries: A comprehensive evaluation on long-term cyclability[J]. Advanced Energy Materials,2018,8:1703154. doi: 10.1002/aenm.201703154
|
[54] |
SHODAI T, OKADA S, TOBISHIMA, S, et al. Anode performance of a new layered nitride Li3−xCoxN (x=0.2–0.6)[J]. Journal of Power Sources,1997,68(2):515-518. doi: 10.1016/S0378-7753(97)02597-4
|
[55] |
PADHI A K, NANJUNDASWAMY K S, GOODENOUGH J B. Phospho-olivines as positive-electrode materials for rechargeable lithium batteries[J]. Journal of The Electrochemical Society,1997,144:1188-1194. doi: 10.1149/1.1837571
|
[56] |
QIN C, LI Y, LV S, et al. Enhancing electrochemical performance of LiFePO4 by vacuum-infiltration into expanded graphite for aqueous Li-ion capacitors[J]. Electrochimica Acta,2017,253:413-421. doi: 10.1016/j.electacta.2017.09.069
|
[57] |
SHI M, LI R, LIU Y. In situ preparation of LiFePO4/C with unique copolymer carbon resource for superior perfor-mance lithium-ion batteries[J]. Journal of Alloys and Compounds,2021,854:157162. doi: 10.1016/j.jallcom.2020.157162
|
[58] |
WU Y, CHONG S, LIU Y, et al. Review on Li-insertion/extraction mechanisms of LiFePO4 cathode materials[J]. Chinese Journal of Structural Chemistry,2018,37:2011-2023.
|
[59] |
SUN S, AN Q, TIAN Z, et al. Low-temperature synthesis of LiFePO4 nanoplates/C composite for lithium ion batteries[J]. Energy & Fuels,2020,34:11597-11605.
|
[60] |
WEN L, HU X, LUO H, et al. Open-pore LiFePO4/C microspheres with high volumetric energy density for lithium ion batteries[J]. Particuology,2015,22:24-29. doi: 10.1016/j.partic.2014.11.002
|
[61] |
ZHANG X, HE W, YUE Y, et al. Bio-synthesis participated mechanism of mesoporous LiFePO4/C nanocomposite microspheres for lithium ion battery[J]. Journal of Materials Chemistry,2012,22:19948-19956. doi: 10.1039/c2jm33425a
|
[62] |
YILMAZ M, RAINA S, HSU S H, et al. Micropatterned arrays of vertically-aligned CNTs grown on aluminum as a new cathode platform for LiFePO4 integration in lithium-ion batteries[J]. Ionics,2019,25:421-427. doi: 10.1007/s11581-018-2651-y
|
[63] |
FEY G T K, KUMAR P. Long-cycling coated LiCoO2 cathodes for lithium batteries-A review[J]. Journal of Industrial And Engineering Chemistry,2004,10:1090-1103.
|
[64] |
SHAARI H R, SETHUPRAKHASH V. Review of electrochemical performance of LiNiO2 and their derivatives as cathode material for lithium-ion batteries[J]. Jurnal Teknologi,2014,70:7-13.
|
[65] |
SASSIN M B, GREENBAUM S G, STALLWORTH P E, et al. Achieving electrochemical capacitor functionality from nanoscale LiMn2O4 coatings on 3-D carbon nanoarchitectures[J]. Journal of Materials Chemistry A,2013,1:2431-2440. doi: 10.1039/c2ta00937d
|
[66] |
YI T, HAO C, YUE C, et al. A literature review and test: Structure and physicochemical properties of spinel LiMn2O4 synthesized by different temperatures for lithium ion battery[J]. Synthetic Metals,2009,159:1255-1260. doi: 10.1016/j.synthmet.2009.02.026
|
[67] |
SHI X, HAN X, SHI X, et al. Synthesis and performance of LiMnO2 as cathodes for Li-ion batteries[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed,2003,18:5-8. doi: 10.1007/BF02838446
|
[68] |
WANG J, SUN X. Olivine LiFePO4: The remaining challenges for future energy storage[J]. Energy & Environmental Science,2015,8:1110-1138.
|
[69] |
MANTHIRAM A, KNIGHT J C, MYUNG S T, et al. Nickel-rich and lithium-rich layered oxide cathodes: Progress and perspectives[J]. Advanced Energy Materials,2016,6:1501010. doi: 10.1002/aenm.201501010
|
[70] |
ZHU C, SHU J, WU X, et al. Electrospun V2O5 micro/nano-rods as cathode materials for lithium ion battery[J]. Journal of Electroanalytical Chemistry,2015,759:184-189. doi: 10.1016/j.jelechem.2015.11.013
|
[71] |
ZHU L, GE P, XIE L, et al. Doped-Li1+xV3O8 as cathode materials for lithium-ion batteries: A mini review[J]. Electrochemistry Communications,2020,115:106722. doi: 10.1016/j.elecom.2020.106722
|
[72] |
QIN R, WEI Y, ZHAI T, et al. LISICON structured Li3V2(PO4)3 with high rate and ultralong life for low-temperature lithium-ion batteries[J]. Journal of Materials Chemistry A,2018,6:9737-9746. doi: 10.1039/C8TA01124A
|
[73] |
CROY J R, GALLAGHER K G, BALASUBRAMANIAN M, et al. Examining hysteresis in composite xLi2MnO3·(1-x)LiMO2 cathode structures[J]. The Journal of Physical Chemistry C,2013,117:6525-6536.
|
[74] |
PADHI A K, ARCHIBALD W B, NANJUNDASWAMY K S, et al. Ambient and high-pressure structures of LiMnVO4 and its Mn3+x/Mn2+x redox energy[J]. Journal of Solid State Chemistry,1997,128:267-272. doi: 10.1006/jssc.1996.7217
|
[75] |
WAGNER N, SVENSSON A M, VULLUM-BRUER F. Effect of carbon content and annealing atmosphere on phase purity and morphology of Li2MnSiO4 synthesized by a PVA assisted sol–gel method[J]. Solid State Ionics,2015,276:26-32. doi: 10.1016/j.ssi.2015.03.029
|
[76] |
TAN H, YU X, HUANG K, et al. Large-scale carambola-like V2O5 nanoflowers arrays on microporous reed carbon as improved electrochemical performances lithium-ion batteries cathode[J]. Journal of Energy Chemistry,2020,51:388-395. doi: 10.1016/j.jechem.2020.03.053
|
[77] |
FENG J, LIU X, ZHANG X, et al. Effects of synthesis methods on Li1+xV3O8 as cathodes in lithium-ion batteries[J]. Journal of The Electrochemical Society,2009,156:A768. doi: 10.1149/1.3174386
|
[78] |
BI L, SONG Z, LIU X, et al. Critical roles of RuO2 nano-particles in enhancing cyclic and rate performance of LISICON Li3V2(PO4)3 cathode materials[J]. Journal of Alloys and Compounds,2020,845:156271. doi: 10.1016/j.jallcom.2020.156271
|
[79] |
YUAN Z, CUI Y, SHEN M, et al. Preparation and electrochemical performance of LiTi2(PO4)3/C composite cathode for lithium ion batteries[J]. Acta Physico-Chimica Sinica,2012,28:1169-1176. doi: 10.3866/PKU.WHXB201203012
|
[80] |
ZHOU J, SUN X, WANG K. Preparation of high-voltage Li3V2(PO4)3 co-coated by carbon and Li7La3Zr2O12 as a stable cathode for lithium-ion batteries[J]. Ceramics International,2016,42:10228-10236. doi: 10.1016/j.ceramint.2016.03.144
|
[81] |
NAYAK P K, ERICKSON E M, SCHIPPER F, et al. Review on challenges and recent advances in the electrochemical performance of high capacity Li- and Mn-rich cathode materials for Li-ion batteries[J]. Advanced Energy Materials,2018,8:1702397. doi: 10.1002/aenm.201702397
|
[82] |
KIM D, SANDI G, CROY J R, et al. Composite 'layered-layered-spinel' cathode structures for lithium-ion batteries[J]. Journal of The Electrochemical Society,2013,160:A31-A38. doi: 10.1149/2.049301jes
|
[83] |
ATES M N, MUKERJEE S, ABRAHAM K M. A search for the optimum lithium rich layered metal oxide cathode material for Li-ion batteries[J]. Journal of The Electrochemical Society,2015,162:A1236-A1245. doi: 10.1149/2.0481507jes
|
[84] |
LI J, LI M, ZHANG L, et al. General synthesis of xLi2MnO3(1−x)LiNi1/3-Co1/3Mn1/3O2(x=1/4, 1/3, and 1/2) hollow microspheres towards enhancing the performance of rechargeable lithium ion batteries[J]. Journal of Materials Chemistry A,2016,4:12442-12450. doi: 10.1039/C6TA04219H
|
[85] |
FEY G T K, LI W, DAHN J R. LiNiVo4-A 4.8 volt electrode material for lithium cells[J]. Journal of The Electrochemical Society,1994,141:2279-2282. doi: 10.1149/1.2055111
|
[86] |
HAREENDRAKRISHNAKUMAR H, CHULLIYOTE R, JOSEPH M G. Micro- and nanocrystalline inverse spinel LiCoVO4 for intercalation pseudocapacitive Li+ storage with ultrahigh energy density and long-term cycling[J]. ACS Applied Energy Materials,2018,1:393-401. doi: 10.1021/acsaem.7b00070
|
[87] |
PRAKASH D, MASUDA Y, SANJEEVIRAJA C. Structural, electrical and electrochemical studies of LiCoVO4 cathode material for lithium rechargeable batteries[J]. Powder Technology,2013,235:454-459. doi: 10.1016/j.powtec.2012.10.042
|
[88] |
VAJEESTON P, BIANCHINI F, FJELLVAG H. First-principles study of the structural stability and dynamic properties of Li2MSiO4(M=Mn, Co, Ni) Polymorphs[J]. Energies,2019,12(2):224. doi: 10.3390/en12020224
|
[89] |
GONG Z, LI Y, YANG Y. Synthesis and electrochemical performance of Li2CoSiO4 as cathode material for lithium ion batteries[J]. Journal of Power Sources,2007,174:524-527. doi: 10.1016/j.jpowsour.2007.06.250
|
[90] |
TSUBAKIYAMA K, KUDO Y, YAMASHITA K. First-principles study on Li2MSiO4(M=Mn, Fe, Co, Ni) as cathode materials of lithium ion battery[J]. ECS Transactions,2013,53:25-34.
|
[91] |
HU Z, ZHANG K, GAO H, et al. Li2MnSiO4@C nanocomposite as a high-capacity cathode material for Li-ion batteries[J]. Journal of Materials Chemistry A,2013,1:12650-12656. doi: 10.1039/c3ta12106b
|
[92] |
WANG L, WU Z, ZOU J, et al. Li-free cathode materials for high energy density lithium batteries[J]. Joule,2019,3:2086-2102. doi: 10.1016/j.joule.2019.07.011
|
[93] |
LI J, FU L, XU Z, et al. Electrochemical properties of carbon-wrapped FeF3 nanocomposite as cathode material for lithium ion battery[J]. Electrochimica Acta,2018,281:88-98. doi: 10.1016/j.electacta.2018.05.158
|