Citation: | YAN Jianhui, KANG Rong, TANG Xing, et al. Effect of ZrO2(Y2O3) content on mechanical properties of Mo-12Si-8.5B-ZrO2(Y2O3) composites with bimodal grain-size distribution[J]. Acta Materiae Compositae Sinica, 2021, 38(11): 3747-3756. doi: 10.13801/j.cnki.fhclxb.20210129.002 |
[1] |
LIU L, SHI C, ZHANG C, et al. Microstructure, microhardness and oxidation behavior of Mo-Si-B alloys in the Moss+Mo2B+Mo5SiB2 three phase region[J]. Intermetallics,2020,116:106618. doi: 10.1016/j.intermet.2019.106618
|
[2] |
LI R, LI B, CHEN X, et al. Variation of phase composition of Mo-Si-B alloys induced by boron and their mechanical properties and oxidation resistance[J]. Materials Science and Engineering: A,2019,749:196-209. doi: 10.1016/j.msea.2019.02.008
|
[3] |
CHOE H, CHEN D, SCHNEIBEL J H, et al. Ambient to high temperature fracture toughness and fatigue-crack propagation behavior in a Mo-12Si-8.5B (at. %) intermetallic[J]. Intermetallics,2001,9(4):319-329. doi: 10.1016/S0966-9795(01)00008-5
|
[4] |
ZHANG G J, DANG Q, KOU H, et al. Microstructure and mechanical properties of lanthanum oxide-doped Mo-12Si-8.5B(at%) alloys[J]. Journal of Alloys and Compounds, 2013, 15: S493-S498.
|
[5] |
KRÜGER M, FRANZ S, SAAGE H, et al. Mechanically alloyed Mo-Si-B alloys with a continuous α-Mo matrix and improved mechanical properties[J]. Intermetallics,2008,16(7):933-941. doi: 10.1016/j.intermet.2008.04.015
|
[6] |
LI B, ZHANG G J, JIANG F, et al. Characterization of Mo-Si-B nanocomposite powders produced using mechanical alloying and powder heat treatment[J]. Journal of Materials Science& Technology,2015,31(10):995-1000.
|
[7] |
LI B, ZHANG G J, JIANG F, et al. Preparation of fine-grained Mo-12Si-8.5B alloys with improved mechanical properties via a mechanical alloying process[J]. Journal of Alloys and Compounds,2014,609:80-85. doi: 10.1016/j.jallcom.2014.04.141
|
[8] |
WANG J, REN S, LI R, et al. Microstructure and improved mechanical properties of ultrafine-grained Mo-12Si-8.5B (at. %) alloys with addition of ZrB2[J]. Progress in Natural Science: Materials International,2018,28(3):371-377. doi: 10.1016/j.pnsc.2018.04.004
|
[9] |
MAJUMDAR S, KUMAR A, SCHLIEPHAKE D, et al. Microstructural and micro-mechanical properties of Mo-Si-B alloyed with Y and La[J]. Materials Science and Engineering: A,2013,573:257-263. doi: 10.1016/j.msea.2013.02.053
|
[10] |
LI W H, ZHANG G J, WANG S X, et al. Ductility of Mo-12Si-8.5B alloys doped with lanthanum oxide by the liquid-liquid doping method[J]. Journal of Alloys and Compounds,2015,642:34-39. doi: 10.1016/j.jallcom.2015.04.047
|
[11] |
LI R, LI B, WANG T, et al. Improved fracture toughness of a Mo-12Si-8.5B-3Zr alloy by grain coarsening and its multiple toughening mechanisms[J]. Journal of Alloys and Compounds,2018,743:716-727. doi: 10.1016/j.jallcom.2018.01.398
|
[12] |
YAN J H, WANG Y, ZHOU P, et al. Microstructures and room temperature mechanical properties of Mo-12Si-8.5B-8Cr alloy[J]. Transactions of the Indian Institute of Metals,2018,71(1):245-251. doi: 10.1007/s12666-017-1173-z
|
[13] |
ZHA M, ZHANG H M, YU Z Y, et al. Bimodal microstructure-A feasible strategy for high-strength and ductile metallic materials[J]. Journal of Materials Science & Technology,2018,34(2):257-264.
|
[14] |
BUI Q H. Heterogeneous plastic deformation in bimodal bulk ultrafine-grained nickel[J]. Journal of Materials Science,2012,47(4):1902-1909. doi: 10.1007/s10853-011-5979-5
|
[15] |
FAN G J, CHOO H, LIAW P K, et al. Plastic deformation and fracture of ultrafine-grained Al-Mg alloys with a bimodal grain size distribution[J]. Acta Materialia,2006,54(7):1759-1766. doi: 10.1016/j.actamat.2005.11.044
|
[16] |
WANG Y M, CHEN M W, ZHOU F H, et al. High tensile ductility in a nanostructured metal[J]. Nature,2002,419(6910):912-915. doi: 10.1038/nature01133
|
[17] |
LI R, LI B, CHEN X, et al. Enhanced fracture toughness and toughening mechanisms of fine-grained Mo-12Si-8.5B alloy with a bi-modally structured α-Mo grain[J]. Materials Science & Engineering:A,2020,772:138684.
|
[18] |
CUI C P, ZHU X G, LIU S L, et al. Effect of nano-sized ZrO2 on high temperature performance of Mo-ZrO2 alloy[J]. Journal of Alloys and Compounds,2018,768:81-87. doi: 10.1016/j.jallcom.2018.07.214
|
[19] |
康蓉, 颜建辉, 李茂键. 溶胶凝胶/高温氢还原法制备纳米Mo-ZrO2(Y2O3)复合粉末[J]. 稀有金属, 2021, 45(3): 288-296.
KANG R, YAN J H, LI M J. Preparation of nanometer Mo-ZrO2(Y2O3) composite powder by sol-gel and high temperature hydrogen reduction[J]. Chinese Journal of Rare Metals, 2021, 45(3): 288-296(in Chinese).
|
[20] |
LI Z, XU L J, WEI S H, et al. Fabrication and mechanical properties of tungsten alloys reinforced with c-ZrO2 particles[J]. Journal of Alloys and Compounds,2018,769:694-705. doi: 10.1016/j.jallcom.2018.07.342
|
[21] |
GHADERI HAMIDI A, ARABI H, VAHDATI KHAKI J. Sintering of a nano-crystalline tungsten heavy alloy powder[J]. International Journal of Refractory Metals & Hard Materials,2019,80:204-209.
|
[22] |
SCHNEIBEL J H, TORTORELLI P F, RITCHIE R O, et al. Optimization of Mo-Si-B intermetallics[J]. Metallurgical & Materials Transactions A,2005,36:525-531.
|
[23] |
徐健建, 颜建辉, 汪异, 等. W对Mo-Si-B合金微观组织和力学性能的影响[J]. 材料热处理学报, 2015, 36(8):22-27.
XU J J, YAN J H, WANG Y, et al. Effect of W addition on microstructure and mechanical properties of Mo-Si-B alloy[J]. Transactions of Materials and Heat Treatment,2015,36(8):22-27(in Chinese).
|
[24] |
LI R, ZHANG G J, LI B, et al. The multi-scale microstructure and strengthening mechanisms of Mo-12Si-8.5BxZr (at. %) alloys[J]. International Journal of Refractory Metals and Hard Materials November. 2017, 68: 65-74.
|
[25] |
WU X L, ZHU Y T. Heterogeneous materials: A new class of materials with unprecedented mechanical properties[J]. Materials Research Letters,2017,5(8):527-532. doi: 10.1080/21663831.2017.1343208
|
[26] |
ASHBY M F, BLUNT F J, BANNISTER M K. Flow characteristics of highly constrained metal wires[J]. Acta Metallurgica,1989,37(7):1847-1857. doi: 10.1016/0001-6160(89)90069-2
|
[27] |
LU G Y, LEDERICH R, SOBOYEJO W. Residual stresses and transformation toughening in MoSi2 composites reinforced with partially stabilized zirconia[J]. Materials Science and Engineering: A,1996,210(1-2):25-41. doi: 10.1016/0921-5093(95)10075-X
|