WANG Bo, JIAO Guiqiong, PAN Wenge, et al. TENSILE AND COMPRESS EXPERIMENTAL INVESTIGATION OF THREE-DIMENSIONALLY BRAIDED C/SiC COMPOSITES[J]. Acta Materiae Compositae Sinica, 2004, 21(3): 110-114.
Citation: WANG Bo, JIAO Guiqiong, PAN Wenge, et al. TENSILE AND COMPRESS EXPERIMENTAL INVESTIGATION OF THREE-DIMENSIONALLY BRAIDED C/SiC COMPOSITES[J]. Acta Materiae Compositae Sinica, 2004, 21(3): 110-114.

TENSILE AND COMPRESS EXPERIMENTAL INVESTIGATION OF THREE-DIMENSIONALLY BRAIDED C/SiC COMPOSITES

More Information
  • Received Date: March 03, 2003
  • Revised Date: April 13, 2003
  • For three-dimensionally braided C/SiC composites,the tensile and compress experiments were carried out to get main mechanical characters, damage development and failure mechanisms under tensile and compress loads. The elastic properties and failure characters under two kinds of loads were compared and some experimental conclusions were deduced. It can be concluded from the stress-strain curves of the test that the damage development in three-dimensionally braided C/SiC composite specimens is continuous. The test results also reveal that the tensile modulus is less than the compress modulus and the tensile stress is greater than the compress stress. The acoustic emission data can reveal the damage development in C/SiC specimens.
  • Related Articles

    [1]ZHU Jun, GUO Wantao, LI Xiang, Wu Yibo, WANG Jihui, NI Aiqing. Stiffness of composite laminates with in-plane waviness defect[J]. Acta Materiae Compositae Sinica, 2018, 35(4): 793-803. DOI: 10.13801/j.cnki.fhclxb.20170702.001
    [2]YU Lingjun, YANG Qingsheng. Piezoresistive behavior of composites with hole defects[J]. Acta Materiae Compositae Sinica, 2018, 35(3): 623-631. DOI: 10.13801/j.cnki.fhclxb.20170608.005
    [3]XU Ying, CHAI Lei, LU Miaomiao. Failure mechanism of FRP reinforced concrete column with initial defects[J]. Acta Materiae Compositae Sinica, 2017, 34(8): 1712-1720. DOI: 10.13801/j.cnki.fhclxb.20161116.001
    [4]LI Guiyu, WANG Haijin, SUN Jie, LI Jianfeng, LI Weidong. Process parameter optimization based on the defects tolerance of drilling composites[J]. Acta Materiae Compositae Sinica, 2014, 31(4): 1022-1029.
    [5]Compression properties of honeycomb sandwich plates with different shape delamination defects[J]. Acta Materiae Compositae Sinica, 2009, 26(5): 153-158.
    [6]Experimental analysis on thickness control of variable thickness composite laminates during autoclave process[J]. Acta Materiae Compositae Sinica, 2009, 26(5): 14-19.
    [7]WANG Henan, ZHANG Zuoguang, GU Yizhuo, LI Min. Effects of different factors on the void defect in epoxy composite laminates in hot pressing process[J]. Acta Materiae Compositae Sinica, 2007, 24(5): 55-60.
    [8]DENG Huoying, ZHANG Zuoguang, GU Yizhuo, LI Min. Experimental research on defects of L-shape laminates in vacuum-bag process[J]. Acta Materiae Compositae Sinica, 2007, 24(4): 34-39.
    [9]CHENG Xiaoquan, WANG Jin, ALI Al-Mansour, HU Renwei, GUAN Zhidong. Study on compressive properties of composite laminates with edge rectangular delamination defect[J]. Acta Materiae Compositae Sinica, 2007, 24(2): 151-158.
    [10]GUAN Zhi-dong, GUO Yuan. Computer simulation of low-velocity impact processof the composite laminate with defect[J]. Acta Materiae Compositae Sinica, 2006, 23(2): 180-184.

Catalog

    Article Metrics

    Article views (1607) PDF downloads (1246) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return