Bonding properties of the interface between engineering cementitious composite and expanded polystyrene insulation board

LI Yushan; YIN Shiping; XU Shilang; HOU Xiangming; WANG Yuqing; LI Chuanxiu

doi:10.13801/j.cnki.fhclxb.20220215.002

Volume 39 Issue 11

Nov. 2022

Turn off MathJax

Article Contents

Article Navigation > Acta Materiae Compositae Sinica > 2022 > 39(11): 5251-5263

LI Yushan, YIN Shiping, XU Shilang, et al. Bonding properties of the interface between engineering cementitious composite and expanded polystyrene insulation board[J]. Acta Materiae Compositae Sinica, 2022, 39(11): 5251-5263. doi: 10.13801/j.cnki.fhclxb.20220215.002

Citation:

LI Yushan, YIN Shiping, XU Shilang, et al. Bonding properties of the interface between engineering cementitious composite and expanded polystyrene insulation board[J]. Acta Materiae Compositae Sinica, 2022, 39(11): 5251-5263. doi: 10.13801/j.cnki.fhclxb.20220215.002

Citation:

PDF( 5683 KB)

Bonding properties of the interface between engineering cementitious composite and expanded polystyrene insulation board

doi: 10.13801/j.cnki.fhclxb.20220215.002

1.
Jiangsu Key Laboratory of Environmental Impact and Structural Safety in Engineering, China University of Mining and Technology, Xuzhou 221116, China
2.
State Key Laboratory for Geomechanics & Deep Underground Engineering, China University of Mining and Technology, Xuzhou 221116, China
3.
College of Civil Engineering and Architecture, Zhejiang University, Hangzhou 310058, China
4.
Shanxi Wujian Group CO. LTD., Taiyuan 030013, China

Received Date: 2021-11-23
Accepted Date: 2022-01-30
Rev Recd Date: 2022-01-15

Available Online: 2022-02-15

Publish Date: 2022-11-01

Abstract

Abstract

Nowadays, with the national advocacy of energy conservation and emission reduction, the problem of high energy consumption of buildings caused by insufficient thermal insulation performance of building envelopes has become increasingly prominent. In this regard, a sandwich structure wall with engineered cementitious composites (ECC) as the surface layer and expanded polystyrene (EPS) board as the insulation layer was adopted to improve the thermal insulation performance of the enclosure structure. It can not only effectively reduce energy dissipation, but also have excellent deformation and crack control ability. However, the bonding performance is an important prerequisite to determine whether it can give full play to the advantages of its own materials and meet the use requirements. Therefore, a double-sided shear test was carried out on the sandwich structure. The effects of the production method, the thickness of insulation layer, the presence or absence of connectors and the insertion angle of connectors on the bonding properties of interface between ECC surface layer and EPS insulation layer were studied. The test results show that the bonding performance of EPS precast specimens is the worst, and the average value of its ultimate load is only 1/4 of that of in-situ casting specimens. The greater thickness of the insulation layer, the worse bonding performance of the specimens. The addition of connectors helps to improve the bearing capacity and bonding performance of specimens, among which the strengthening effect of specimens with 45° connectors is the most obvious. At the same time, through the analysis of the toughness index, it is found that the toughness of the specimens with connectors is better, and the specimen with the insulation layer thickness of 50 mm in the specimen without connector also has good interfacial bonding performance at the later stage of the test. In addition, based on the analysis theory of Teixeira, the shear bearing capacity formula of the specimens was deduced. Comparing the calculation results with the test results, the results show that the calculation formula can be used to predict the shear bearing capacity of the specimens.
- sandwich structure,
- ECC,
- EPS,
- interface bonding performance,
- toughness index,
- shear capacity
Long Abstrsct
Innovation Points

FullText(HTML)

References(21)

References

[1]	EINEA A, SALMON D C, TADROS M K, et al. A new structurally and thermally efficient precast sandwich panel system[J]. PCI Journal,1994,39(4):90-101. doi: 10.15554/pcij.07011994.90.101
[2]	O'HEGARTY R, KINNANE O. Review of precast concrete sandwich panels and their innovations[J]. Construction and Building Materials,2019,233:117145.
[3]	LI V C. On engineered cementitious composites (ECC)-A review of the material and its applications[J]. Journal of Advanced Concrete Technology,2003,1(3):215-230. doi: 10.3151/jact.1.215
[4]	董恒瑞, 刘军, 秦砚瑶, 等. 建筑外围护系统节能保温形式及发展趋势浅析[J]. 建设科技, 2020(8):37-40. DONG Hengrui, LIU Jun, QIN Yanyao, et al. Analysis on energy saving and thermal insulation forms and development trend of building external envelope system[J]. Construction Technology,2020(8):37-40(in Chinese).
[5]	MA H, QIAN S, ZHANG Z, et al. Tailoring engineered cementitious composites with local ingredients[J]. Construction and Building Materials,2015,101:584-595. doi: 10.1016/j.conbuildmat.2015.10.146
[6]	ZHANG Z, QIAN S, LIU H, et al. Ductile concrete material with self-healing capacity for jointless concrete pavement use[J]. Transportation Research Record,2017,2640(1):78-83. doi: 10.3141/2640-09
[7]	徐世烺, 李庆华, 李贺东. 碳纤维编织网增强超高韧性水泥基复合材料弯曲性能的试验研究[J]. 土木工程学报, 2007(12):69-76. XU Shilang, LI Qinghua, LI Hedong. An experimental study on the flexural properties of carbon textile reinforced ECC[J]. China Civil Engineering Journal,2007(12):69-76(in Chinese).
[8]	CHOI K B, CHOI W C, FEO L, et al. In-plane shear behavior of insulated precast concrete sandwich panels reinforced with corrugated GFRP shear connectors[J]. Composites Part B: Engineering,2015,79:419-429. doi: 10.1016/j.compositesb.2015.04.056
[9]	TAE S O, JANG S J, LEE K, et al. Insulation type effect on the direct shear behavior of concrete sandwich panel (CSP) with non-shear connectors[J]. Advanced Materials Research,2013,663:154-158. doi: 10.4028/www.scientific.net/AMR.663.154
[10]	SOPAL G J. Use of CFRP grid as shear transfer mechanism for precast concrete sandwich wall panels[M]. America Raleigh: North Carolina State University, 2013.
[11]	宋小软, 牛伟, 姜余丰, 等. 复合保温模板夹芯混凝土的界面粘结性能试验研究[J]. 混凝土与水泥制品, 2013(8):62-67. doi: 10.3969/j.issn.1000-4637.2013.08.016 SONG Xiaoruan, NIU Wei, JIANG Yufeng, et al. Experimental study on interfacial bonding performance of composite insulation formwork sandwich concrete[J]. Concrete and Cement Products,2013(8):62-67(in Chinese). doi: 10.3969/j.issn.1000-4637.2013.08.016
[12]	HODICKY K, SOPAL G, RIZKALLA S, et al. Experimental and numerical investigation of the FRP shear mechanism for concrete sandwich panels[J]. Journal of Composites for Construction,2015,19(5):04014083. doi: 10.1061/(ASCE)CC.1943-5614.0000554
[13]	高睿. 保温复合剪力墙各叠合层的界面粘结性能研究[D]. 北京: 北方工业大学, 2019. GAO Rui. Study on interfacial bonding performance of laminated layers of thermal insulation composite shear wall[D]. Beijing: Northern University of Technology, 2019(in Chinese).
[14]	KAZEM H, BUNN W G, SELIEM H M, et al. Durability and long term behavior of FRP/foam shear transfer mecha-nism for concrete sandwich panels[J]. Construction and Building Materials,2015,98(15):722-734.
[15]	NAITO C, HOEMANN J, BEACRAFT M, et al, Performance and characterization of shear ties for use in insulated precast concrete sandwich wall panels[J]. Journal of Structural Engineering, 2012, 138(1): 52-61.
[16]	JANG S J, YOU Y C, YUN H D. Effect of GFRP shear ties on shear behavior of interfaces between precast concrete panel and extruded polystyrene special insulation[J]. Advanced Materials Research,2013,658:46-49. doi: 10.4028/www.scientific.net/AMR.658.46
[17]	尹红宇, 孙帅, 胡夏闽. 织物增强混凝土与再生保温混凝土界面黏结性能试验研究[J]. 工业建筑, 2017, 47(2):128-132, 179. YIN Hongyu, SUN Shuai, HU Xiamin. Experimental study on interfacial bonding performance between fabric reinforced concrete and recycled aggregate thermal insulation concrete[J]. Industrial Building,2017,47(2):128-132, 179(in Chinese).
[18]	TOMLINSON D G, TEIXEIRA N, FAM A, et al. New shear connector design for insulated concrete sandwich panels using basalt fiber-reinforced polymer bars[J]. Journal of Composites for Construction,2016,20(4):04016003. doi: 10.1061/(ASCE)CC.1943-5614.0000662
[19]	皇民, 赵玉如, 蔺世豪, 等. 冻融循环下BFRP筋与混凝土黏结滑移本构模型[J]. 混凝土, 2021(8):1-5, 10. doi: 10.3969/j.issn.1002-3550.2021.08.001 HUANG Min, ZHAO Yuru, LIN Shihao, et al. Bond slip constitutive model between BFRP reinforcement and concrete under freeze-thaw cycle[J]. Concrete,2021(8):1-5, 10(in Chinese). doi: 10.3969/j.issn.1002-3550.2021.08.001
[20]	KIM H R, KANG D H, YUN H D. Influence of insulation type on in-plane shear behavior of insulated concrete sandwich panels (ICSP) with GFRP grid shear connectors[J]. Applied Mechanics and Materials,2014,3014(525):416-419.
[21]	MIRMIRAN A, YUAN W, CHEN X. Design for slenderness in concrete columns internally reinforced with fiber-reinforced polymer bars[J]. ACI Structural Journal,2001,98(1):116-125.