Experimental modal analysis of the composite laminates with temperature variation[J]. Acta Materiae Compositae Sinica, 2008, 25(2): 149-155.
Citation: Experimental modal analysis of the composite laminates with temperature variation[J]. Acta Materiae Compositae Sinica, 2008, 25(2): 149-155.

Experimental modal analysis of the composite laminates with temperature variation

More Information
  • Received Date: May 31, 2007
  • Revised Date: August 21, 2007
  • The effect of varying environmental conditions on the modal properties of composite laminates was
    studied by experimental test s , which is vital for the safety of vibration2 based st ructural health monitoring (SHM)
    and vibration cont rol techniques. The st ructure responses were measured with different temperature conditions by exciter and hammer test s. The modal parameters of composite laminates were identified by the Stochastic Subspace Identification (SSI) method. It is found that the f requencies and damping ratios have a st rong negative correlation with temperature , but no clear correlation of mode shapes with temperature changes can be observed. These experimental test result s indicate that the influence of temperature variation should be considered during the design process of st ructural health monitoring and vibration cont rol techniques in laminated composite engineering systems.
  • Related Articles

    [1]XU Shihua, FANG Yiqun, WANG Qingwen. Non-isothermal crystallization kinetics of wood powder/low melting point polyamide 6 composites[J]. Acta Materiae Compositae Sinica, 2021, 38(7): 2218-2223. DOI: 10.13801/j.cnki.fhclxb.20200902.002
    [2]ZHEN Wen, TAI Feng, GUO Fu. Welding characterization of polyhedral oligomeric silsesquioxane particles reinforced Sn-Ag based composite solder[J]. Acta Materiae Compositae Sinica, 2014, 31(1): 166-170.
    [3]ZHENG Jingzhi, ZHOU Xingping, XIE Xiaolin. Non-isothermal crystallization kinetics of polypropylene containing silica hybrid particles as fillers[J]. Acta Materiae Compositae Sinica, 2013, 30(2): 18-23.
    [4]Dynamic mechanical analysis of isothermal curing of epoxy prepreg[J]. Acta Materiae Compositae Sinica, 2009, 26(6): 78-84.
    [5]Numerical simulation of non-isothermal RTM process[J]. Acta Materiae Compositae Sinica, 2009, 26(4): 146-150.
    [6]Curing kinetics of epoxy resin for RFI process using isothermal DSC[J]. Acta Materiae Compositae Sinica, 2008, 25(4): 18-23.
    [7]Zhang Yu-jun, Li Ai-ju, Li Chun-sheng, Zhao Tian-ping, Yin Yan-sheng. PREPARATION OF Fe-Al INTERMETALLIC COMPOUNDS POWDER[J]. Acta Materiae Compositae Sinica, 1999, 16(4): 40-43.
    [8]Wu Kun, Akihiko Kamio. A STUDY OF AGEING BEHAVIOURS OF SiCw/AZ91 MAGNESIUM COMPOSITES[J]. Acta Materiae Compositae Sinica, 1993, 10(2): 91-98.
    [9]Li Yichun, Shao Wenzhu, An Xiyang. THE EFFECT OF Al2O3 PARTICLES REINFORCEMENT ON THE AGING BEHAVIOUR OF Al2O3p/Al COMPOSITES[J]. Acta Materiae Compositae Sinica, 1993, 10(1): 47-50.
    [10]Liu Jun, Wang Dezun, Yao Zhongkai. AGING BEHAVIOR IN A SILICON CARBIDE WHISKER REINFORCED LD2 ALUMINUM ALLOY COMPOSITE[J]. Acta Materiae Compositae Sinica, 1992, 9(4): 111-113.

Catalog

    Article Metrics

    Article views (1854) PDF downloads (287) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return