Preparation and structure characterization of carbon fibers from the phenolated Chinese fir[J]. Acta Materiae Compositae Sinica, 2009, 26(2): 101-106.
Citation: Preparation and structure characterization of carbon fibers from the phenolated Chinese fir[J]. Acta Materiae Compositae Sinica, 2009, 26(2): 101-106.

Preparation and structure characterization of carbon fibers from the phenolated Chinese fir

More Information
  • Received Date: April 20, 2008
  • Revised Date: August 21, 2008
  • After melt-spinning by adding hexamethylenetetramine and the curing treatment,carbon fibers were prepared from the phenolated Chinese fir (Cunninghamia lanceolata) by using the direct carbonization method. The structure characterization of carbon fibers was studied by SEM,FTIR,Raman spectroscopy and elemental analysis.The results show that with carbonization temperature rising,the Raman spectra of carbon fibers from the phenolated Chinese fir have the D peak at 1360 cm -1 and the G peak at 1595 cm-1  that are similar to other graphitoidal materials. At the same time,the value of the disordering R decreases and the crystallite sizes La increases with the rise of carbonization temperature. It is found that the microstructure of the carbon fibers becomes more and more ordered. The carbon fibers at 1000℃ have smooth surface and an ellipse cross-section,and the elemental mass fractions of the carbon fibers are 94.04% for C,4.26% for O and 0.5% for H,respectively.
  • Related Articles

    [1]YANG Hongjuan, YANG Zhengyan, YANG Lei, SHAN Yinan, LIN Kuixu, WU Zhanjun. Progress in ultrasonic testing and imaging method for damage of carbon fiber composites[J]. Acta Materiae Compositae Sinica, 2023, 40(8): 4295-4317. DOI: 10.13801/j.cnki.fhclxb.20230318.001
    [2]MA Li, WEN Ange, SHEN Chuanchuan, GUO Jing, ZHENG Jinyang. Wrinkles in fiber-reinforced resin composites: Micro-stress non-destructive testing[J]. Acta Materiae Compositae Sinica, 2022, 39(7): 3590-3602. DOI: 10.13801/j.cnki.fhclxb.20210903.001
    [3]LIU Xu, WU Junwei, HE Yong, YUAN Maodan, DENG Lijun, ZHANG Yongkang, ZENG Lvming, JI Xuanrong. Laser ultrasonic testing technology for carbon fiber reinforced resin braided composites based on air-coupled transducer[J]. Acta Materiae Compositae Sinica, 2021, 38(9): 2829-2838. DOI: 10.13801/j.cnki.fhclxb.20201210.003
    [4]XIANG He, JIANG Yaming, QI Yexiong, LIN Wenni, WANG Xiujuan, QI Xiaoling, TIAN Hui. Research progress in nondestructive testing technologies for textile composite preform forming process[J]. Acta Materiae Compositae Sinica, 2021, 38(4): 1029-1042. DOI: 10.13801/j.cnki.fhclxb.20201021.002
    [5]XU Ying, WANG Qingyuan, LUO Congcong, ZHENG Qian. Nondestructive debonding detection of fiber reinforced plastics strengthened concrete structure based on infrared thermal imaging with laser thermal excitation[J]. Acta Materiae Compositae Sinica, 2020, 37(2): 472-481. DOI: 10.13801/j.cnki.fhclxb.20190428.001
    [6]Non-destructive testing and evaluation of 3D needled C/SiC plate with density gradient[J]. Acta Materiae Compositae Sinica, 2010, 27(6): 106-112.
    [7]Infrared thermal wave imaging for nondestructive detection and measurement of the C/SiC composites[J]. Acta Materiae Compositae Sinica, 2009, 26(5): 112-119.
    [8]Nondestructive testing and evaluation of 2D C/SiC with defects[J]. Acta Materiae Compositae Sinica, 2008, 25(5): 85-90.
    [9]leng Jinsong, Du Shanyi, Wang Dianfu, Li Quanlong. SENSITIVITY OF THE COIN-TAP METHOD OF NONDESTRUCTIVE TESTING FOR COMPOSITE STRUCTURES[J]. Acta Materiae Compositae Sinica, 1995, 12(4): 99-105.
    [10]Du Shanyi, Leng Jinsong, Gu Zhenlong. NON-DESTRUCTIVE TESTING FOR COMPOSITE PLATE AND SHELL WITH RUBBER LINER USING STRESS WAVE TECHNIQUE[J]. Acta Materiae Compositae Sinica, 1993, 10(1): 65-69.

Catalog

    Article Metrics

    Article views (1909) PDF downloads (266) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return