Preparation and properties of sodium alginate-gelatin composite hydrogels with different topological structures by 3D printing

SUN Shiru; LIU Yang; WANG Jinghui; LIAN Xiaojie; AN Meiwen

doi:10.13801/j.cnki.fhclxb.20210917.001

Volume 39 Issue 8

Aug. 2022

Turn off MathJax

Article Contents

Article Navigation > Acta Materiae Compositae Sinica > 2022 > 39(8): 4049-4056

SUN Shiru, LIU Yang, WANG Jinghui, et al. Preparation and properties of sodium alginate-gelatin composite hydrogels with different topological structures by 3D printing[J]. Acta Materiae Compositae Sinica, 2022, 39(8): 4049-4056. doi: 10.13801/j.cnki.fhclxb.20210917.001

Citation:

SUN Shiru, LIU Yang, WANG Jinghui, et al. Preparation and properties of sodium alginate-gelatin composite hydrogels with different topological structures by 3D printing[J]. Acta Materiae Compositae Sinica, 2022, 39(8): 4049-4056. doi: 10.13801/j.cnki.fhclxb.20210917.001

Citation:

SUN Shiru, LIU Yang, WANG Jinghui, et al. Preparation and properties of sodium alginate-gelatin composite hydrogels with different topological structures by 3D printing[J]. Acta Materiae Compositae Sinica, 2022, 39(8): 4049-4056. doi: 10.13801/j.cnki.fhclxb.20210917.001

PDF( 3848 KB)

Preparation and properties of sodium alginate-gelatin composite hydrogels with different topological structures by 3D printing

doi: 10.13801/j.cnki.fhclxb.20210917.001

SUN Shiru¹,
LIU Yang^{1, 2, 3
,
,},
WANG Jinghui¹,
LIAN Xiaojie²,
AN Meiwen^{1, 2
,
,}

1.
Shanxi Key Laboratory of Material Strength & Structural Impact, Institute of Biomedical Engineering, College of Biomedical Engineering, Taiyuan University of Technology, Taiyuan 030024, China
2.
Research Center for Nanobiomaterials & Regenerative Medicine, College of Biomedical Engineering, Taiyuan University of Technology, Taiyuan 030024, China
3.
Department of Nuclear Medicine, First Hospital of Shanxi Medical University, Taiyuan 030001, China

Received Date: 2021-07-28
Accepted Date: 2021-09-06
Rev Recd Date: 2021-09-01

Available Online: 2021-09-17

Publish Date: 2022-08-31

Abstract

Abstract

In this paper, the structure of skin dermal collagen fibers were simulated, and the sodium alginate (SA)-gelatin (GEL) composite scaffold with three topological angles of 45°, 60° and 90° were 3D printed to study the effect of topology on the performance of the hydrogel scaffold, respectively. SEM were used to characterize the microstructure of the scaffolds. The water content, porosity, mechanical properties, swelling ratio and in vitro degradation ratio of each group of scaffolds were measured. FTIR were used to test the functional groups of SA, GEL and composite hydrogel. Cell counting kit-8 (CCK-8) reagent and immunofluorescence staining were used to test the toxicity of the scaffolds to human dermal fibroblasts (HFb) and the biocompatibility of scaffolds. The results show that the topology of each group is clear. The relative position of the absorption peak in the FTIR spectrum provides the chemical structure of the scaffold material. The water content and porosity of the three groups are all greater than 80%. The compressive elastic modulus of the 45°, 60° and 90° scaffolds are (3.57±0.14) kPa, (3.18±0.31) kPa and (2.03±0.29) kPa, respectively. CCK-8 results show that the cell activity on three groups is maintained at more than 90% of control group without scaffolds. The results of microfilament and nuclear staining show that the spread of HFb on the 45° scaffold on the first day of inoculation is better than that of the other two groups, HFb proliferates significantly on the three groups of scaffolds with the increase of time, indicating that the scaffold has good cytocompatibility. This paper designs and characterizes the performance of SA-GEL scaffolds with different topologies, and provides an important foundation for the construction of subsequent tissue engineering dermis and the analysis of HFb collective migration on a three dimensional matrix.
- organizational engineering,
- skin scaffold,
- topology,
- 3D printing,
- hydrogel,
- sodium alginate,
- gelatin
Long Abstrsct
Innovation Points

FullText(HTML)

References(24)

References

[1]	XIONG S, ZHANG X, LU P, et al. A gelatin-sulfonated silk composite scaffold based on 3D printing technology enhances skin regeneration by stimulating epidermal growth and dermal neovascularization[J]. Scientific Reports,2017,7(1):4288-4300. doi: 10.1038/s41598-017-04149-y
[2]	MAVER T, MAVER U, KARIN S, et al. Advanced therapies of skin injuries[J]. Wiener Klinische Wochenschrift,2015,127(5):187-198.
[3]	HERNDON D N, BARROW R E, RUTAN R L, et al. A compa-rison of conservative versus early excision. Therapies in severely burned patients[J]. Annals of Surgery,1989,209(5):547-554. doi: 10.1097/00000658-198905000-00006
[4]	KOMAL V, ATUL C, SHWETA T, et al. Advances in skin regeneration using tissue engineering[J]. International Journal of Molecular Sciences,2017,18(4):789-808.
[5]	肖仕初, 郑勇军. 组织工程皮肤现状与挑战[J]. 中华烧伤杂志, 2020, 36(3):166-170. doi: 10.3760/cma.j.cn501120-20191202-00449 XIAO Shichu, ZHENG Yongjun. Status and challenges of tissue engineered skin[J]. Chinese Journal of Burns,2020,36(3):166-170(in Chinese). doi: 10.3760/cma.j.cn501120-20191202-00449
[6]	MEL A D, SEIFALIAN A M, BIRCHALL M A. Orchestrating cell/material interactions for tissue engineering of surgical implants[J]. Macromolecular Bioscience,2012,12(8):1010-1021. doi: 10.1002/mabi.201200039
[7]	YU J R, NAVARRO J, COBURN J C, et al. Current and future perspectives on skin tissue engineering: Key features of biomedical research, translational assessment, and clinical application[J]. Advanced Healthcare Materials,2019,8(5):61-80.
[8]	曹成波, 王一兵, 沈翔, 等. 组织工程皮肤支架材料[J]. 中国生物工程杂志, 2005, 36(10):58-62. CAO Chengbo, WANG Yibing, SHEN Xiang, et al. Scaffolds for skin tissue engineering[J]. Journal of Chinese Biotechnology,2005,36(10):58-62(in Chinese).
[9]	DV A, ND A, NB B, et al. Emerging and innovative approaches for wound healing and skin regeneration: Current status and advances[J]. Biomaterials,2019,216:119267-119336. doi: 10.1016/j.biomaterials.2019.119267
[10]	LIU J, CHI J, WANG K, et al. Full-thickness wound healing using 3D bioprinted gelatin-alginate scaffolds in mice: A histopathological study[J]. International Journal of Clini-cal and Experimental Pathology, 2016,15(6): 241-257.
[11]	PAHLEVANZADEH F, MOKHTARI H, BAKHSHESHIRAD H R, et al. Recent trends in three-dimensional bioinks based on alginate for biomedical applications[J]. Materials, 2020, 13(18): 3980-4017.
[12]	BALAKRISHNAN B, BANERJEE R. Biopolymer-based hydrogels for cartilage tissue engineering[J]. Chemical Reviews,2011,111(8):4453-4474. doi: 10.1021/cr100123h
[13]	ABOWSKA M B, CIERLUK K, JANKOWSKA A M, et al. A review on the adaption of alginate-gelatin hydrogels for 3D cultures and bioprinting[J]. Materials,2021,14(4):858-882. doi: 10.3390/ma14040858
[14]	PELTOLA S M, MELCHELS F, GRIJPMA D W, et al. A review of rapid prototyping techniques for tissue engineering purposes, annals of medicine, informa healthcare[J]. Informa Uk Ltd Uk,2009,62(1):336-352.
[15]	CUI H, NOWICKI M, FISHER J P, et al. 3D bioprinting for organ regeneration[J]. Advanced Healthcare Materials,2016,6(1):1601118.
[16]	SMANDRI A, NORDIN A, HWEI N M, et al. Natural 3D-printed bioinks for skin regeneration and wound healing: A systematic review[J]. Polymers, 2020, 12(8): 1782-1811.
[17]	JANG J, JU Y P, GE G, et al. Biomaterials-based 3D cell printing for next-generation therapeutics and diagnostics[J]. Biomaterials,2017,156:88-106.
[18]	赖晓文, 何晓升, 钟晓春, 等. 增生性瘢痕组织内透明质酸含量与含水量[J]. 赣南医学院学报, 2008, 28(3):324-325. doi: 10.3969/j.issn.1001-5779.2008.03.005 LAI Xiaowen, HE Xiaosheng, ZHONG Xiaochun, et al. Hyaluronic acid content and water content in hypertrophic scar tissue[J]. Journal of Gannan Medical College,2008,28(3):324-325(in Chinese). doi: 10.3969/j.issn.1001-5779.2008.03.005
[19]	左丹英, 王琰, 陶咏真. 组织工程皮肤支架材料与制备方法的研究进展[J]. 武汉纺织大学学报, 2010, 23(2):22-26. ZUO Danying, WANG Yan, TAO Yongzhen. Research progress in materials and preparation methods of skin tissue engineering scaffoldings[J]. Journal of Wuhan Textile University,2010,23(2):22-26(in Chinese).
[20]	张豪杰, 邢天龙, 周燕, 等. 具有梯度孔结构特征的聚己内酯多孔支架的3D打印制备及表征[J]. 高校化学工程学报, 2018, 32(3):708-717. ZHANG Haojie, XING Tianlong, ZHOU Yan, et al. Preparation and characterization of polycaprolactone porous scaffolds with gradient pore structure by 3D printing[J]. Jour-nal of Chemical Engineering,2018,32(3):708-717(in Chinese).
[21]	蒋柯. 海藻酸钠-明胶复合凝胶支架打印过程研究及性能分析[D]. 杭州: 杭州电子科技大学, 2019. JIANG Ke. Study on printing process and performance analysis of sodium alginate-gelatin composite gel scaffold[D]. Hangzhou: Hangzhou Dianzi University, 2019(in Chinese).
[22]	WANG X, WANG Q, XU C. Nanocellulose-based inks for 3D bioprinting: Key aspects in research development and challenging perspectives in applications-A mini review[J]. Bioengineering,2020,7(2):40-60.
[23]	XU C, MOLINO B Z, WANG X, et al. 3D printing of nanocellulose hydrogel scaffolds with tunable mechanical strength towards wound healing application[J]. Journal of Mater-ials Chemistry B,2018,6(43):7066-7075. doi: 10.1039/C8TB01757C
[24]	WANG S, XIONG Y, CHEN J, et al. Three dimensional printing bilayer membrane scaffold promotes wound healing[J]. Frontiers in Bioengineering and Biotechnology,2019,7:348-379.