Citation: | LI Jiayu, FU Yutong, LI Yuanqing, et al. Research progress on mechanical performance optimization and functional design of additive manufactured biomimetic structures[J]. Acta Materiae Compositae Sinica, 2024, 41(9): 4435-4456. doi: 10.13801/j.cnki.fhclxb.20240423.004 |
[1] |
DAI H, DAI W, HU Z, et al. Advanced composites inspired by biological structures and functions in nature: Architecture design, strengthening mechanisms, and mechanical-functional responses[J]. Advanced Science, 2023, 10(14): 2207192. doi: 10.1002/advs.202207192
|
[2] |
CHEN Y, MA Y, YIN Q, et al. Advances in mechanics of hierarchical composite materials[J]. Composites Science and Technology, 2021, 214: 108970. doi: 10.1016/j.compscitech.2021.108970
|
[3] |
WEGST U G K, BAI H, SAIZ E, et al. Bioinspired structural materials[J]. Nature Materials, 2015, 14(1): 23-36. doi: 10.1038/nmat4089
|
[4] |
RHO J Y, KUHN-SPEARING L, ZIOUPOS P. Mechanical properties and the hierarchical structure of bone[J]. Medical Engineering & Physics, 1998, 20(2): 92-102.
|
[5] |
JÄGER I, FRATZL P. Mineralized collagen fibrils: A mechanical model with a staggered arrangement of mineral particles[J]. Biophysical Journal, 2000, 79(4): 1737-1746. doi: 10.1016/S0006-3495(00)76426-5
|
[6] |
NALLA R K, KRUZIC J J, KINNEY J H, et al. Mechanistic aspects of fracture and R-curve behavior in human cortical bone[J]. Biomaterials, 2005, 26(2): 217-231. doi: 10.1016/j.biomaterials.2004.02.017
|
[7] |
SCHWEIDLER S, BOTROS M, STRAUSS F, et al. High-entropy materials for energy and electronic applications[J]. Nature Reviews Materials, 2024, 9(4): 266-281. doi: 10.1038/s41578-024-00654-5
|
[8] |
KETEN S, XU Z, IHLE B, et al. Nanoconfinement controls stiffness, strength and mechanical toughness of β-sheet crystals in silk[J]. Nature Materials, 2010, 9(4): 359-367. doi: 10.1038/nmat2704
|
[9] |
YU H, LI H, SUN X, et al. Biomimetic flexible sensors and their applications in human health detection[J]. Biomimetics, 2023, 8(3): 8030293.
|
[10] |
MA X, LIU J, ZHANG S, et al. Recent trends in bionic stepping piezoelectric actuators for precision positioning: A review[J]. Sensors and Actuators A: Physical, 2023, 364: 114830. doi: 10.1016/j.sna.2023.114830
|
[11] |
MA Y, DENG B, HE R, et al. Advancements of 3D bioprinting in regenerative medicine: Exploring cell sources for organ fabrication[J]. Heliyon, 2024, 10(3): 24593. doi: 10.1016/j.heliyon.2024.e24593
|
[12] |
SIDDIQUE S H, HAZELL P J, WANG H, et al. Lessons from nature: 3D printed bio-inspired porous structures for impact energy absorption–A review[J]. Additive Manufacturing, 2022, 58: 103051. doi: 10.1016/j.addma.2022.103051
|
[13] |
CRAPNELL R D, KALINKE C, SILVA L R G, et al. Additive manufacturing electrochemistry: An overview of producing bespoke conductive additive manufacturing filaments[J]. Materials Today, 2023, 71: 73-90. doi: 10.1016/j.mattod.2023.11.002
|
[14] |
DI L, YANG Y, WANG S. Additive manufacturing thermoplastic recycling: Profit-driven planning and optimization[J]. Journal of Cleaner Production, 2024, 436: 140598. doi: 10.1016/j.jclepro.2024.140598
|
[15] |
AI Y, YAN Y, YUAN P, et al. The numerical investigation of cladding layer forming process in laser additive manufacturing with wire feeding[J]. International Journal of Thermal Sciences, 2024, 196: 108669. doi: 10.1016/j.ijthermalsci.2023.108669
|
[16] |
IMRAN R, Al RASHID A, POLAT R, et al. Numerical study on effect of process parameters on material extrusion 3D printing (ME3DP) for porous bone tissue engineering scaffolds[J]. Results in Engineering, 2024, 22: 102046. doi: 10.1016/j.rineng.2024.102046
|
[17] |
MORA S, PUGNO N M, MISSERONI D. 3D printed architected lattice structures by material jetting[J]. Materials Today, 2022, 59: 107-132. doi: 10.1016/j.mattod.2022.05.008
|
[18] |
KANISHKA K, ACHERJEE B. Revolutionizing manufacturing: A comprehensive overview of additive manufacturing processes, materials, developments, and challenges[J]. Journal of Manufacturing Processes, 2023, 107: 574-619. doi: 10.1016/j.jmapro.2023.10.024
|
[19] |
WU Y, FANG J, WU C, et al. Additively manufactured materials and structures: A state-of-the-art review on their mechanical characteristics and energy absorption[J]. International Journal of Mechanical Sciences, 2023, 246: 108102. doi: 10.1016/j.ijmecsci.2023.108102
|
[20] |
ZOU M, XU S, WEI C, et al. A bionic method for the crashworthiness design of thin-walled structures inspired by bamboo[J]. Thin-Walled Structures, 2016, 101: 222-230. doi: 10.1016/j.tws.2015.12.023
|
[21] |
HU D, WANG Y, SONG B, et al. Energy-absorption characteristics of a bionic honeycomb tubular nested structure inspired by bamboo under axial crushing[J]. Composites Part B: Engineering, 2019, 162: 21-32. doi: 10.1016/j.compositesb.2018.10.095
|
[22] |
XIANG J W, DU J X, LI D C, et al. Numerical analysis of the impact resistance in aluminum alloy bi-tubular thin-walled structures designs inspired by beetle elytra[J]. Journal of Materials Science, 2017, 52(22): 13247-13260. doi: 10.1007/s10853-017-1420-z
|
[23] |
TSANG H H, RAZA S. Impact energy absorption of bio-inspired tubular sections with structural hierarchy[J]. Composite Structures, 2018, 195: 199-210. doi: 10.1016/j.compstruct.2018.04.057
|
[24] |
AN X Y, FAN H L. Hybrid design and energy absorption of luffa-sponge-like hierarchical cellular structures[J]. Materials & Design, 2016, 106: 247-257.
|
[25] |
TANE M, ZHAO F, SONG Y H, et al. Formation mechanism of a plateau stress region during dynamic compression of porous iron: Interaction between oriented cylindrical pores and deformation twins[J]. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2014, 591: 150-158. doi: 10.1016/j.msea.2013.10.078
|
[26] |
RHEE H, TUCKER M T, WHITTINGTON W R, et al. Structure-property responses of bio-inspired synthetic foams at low and high strain rates[J]. Science and Engineering of Compsite Materials, 2015, 22(4): 365-373.
|
[27] |
ZHANG Z, SONG B, YAO Y G, et al. Bioinspired, simulation-guided design of polyhedron metamaterial for simultaneously efficient heat dissipation and energy absorption[J]. Advanced Materials Technologies, 2022, 7(10): 00076.
|
[28] |
YANG X F, MA J X, SHI Y L, et al. Crashworthiness investigation of the bio-inspired bi-directionally corrugated core sandwich panel under quasi-static crushing load[J]. Materials & Design, 2017, 135: 275-290.
|
[29] |
LEE N, HORSTEMEYER M F, RHEE H, et al. Hierarchical multiscale structure-property relationships of the red-bellied woodpecker (Melanerpes carolinus) beak[J]. Journal of the Royal Society Interface, 2014, 11(96): 0274.
|
[30] |
HA N S, LU G X, XIANG X M. Energy absorption of a bio-inspired honeycomb sandwich panel[J]. Journal of Materials Science, 2019, 54(8): 6286-6300. doi: 10.1007/s10853-018-3163-x
|
[31] |
SUN Z, SHI S S, GUO X, et al. On compressive properties of composite sandwich structures with grid reinforced honeycomb core[J]. Composites Part B-Engineering, 2016, 94: 245-252. doi: 10.1016/j.compositesb.2016.03.054
|
[32] |
YANG X F, SUN Y X, YANG J L, et al. Out-of-plane crashworthiness analysis of bio-inspired aluminum honeycomb patterned with horseshoe mesostructure[J]. Thin-Walled Structures, 2018, 125: 1-11. doi: 10.1016/j.tws.2018.01.014
|
[33] |
ZHANG W, YIN S, YU T X, et al. Crushing resistance and energy absorption of pomelo peel inspired hierarchical honeycomb[J]. International Journal of Impact Engineering, 2019, 125: 163-172. doi: 10.1016/j.ijimpeng.2018.11.014
|
[34] |
HE Q, FENG J, CHEN Y J, et al. Mechanical properties of spider-web hierarchical honeycombs subjected to out-of-plane impact loading[J]. Journal of Sandwich Structures & Materials, 2020, 22(3): 771-796.
|
[35] |
PENG C X, FOX K, QIAN M, et al. 3D printed sandwich beams with bioinspired cores: Mechanical performance and modelling[J]. Thin-Walled Structures, 2021, 161: 107471. doi: 10.1016/j.tws.2021.107471
|
[36] |
PELANCONI M, ORTONA A. Nature-inspired, ultra-lightweight structures with gyroid cores produced by additive manufacturing and reinforced by unidirectional carbon fiber ribs[J]. Materials, 2019, 12(24): 4134. doi: 10.3390/ma12244134
|
[37] |
RUMNEY R M H, ROBSON S C, KAO A P, et al. Biomimetic generation of the strongest known biomaterial found in limpet tooth[J]. Nature Communications, 2022, 13(1): 3753. doi: 10.1038/s41467-022-31139-0
|
[38] |
TAVANGARIAN F, SADEGHZADE S, DAVAMI K. A novel biomimetic design inspired by nested cylindrical structures of spicules[J]. Journal of Alloys and Compounds, 2021, 864: 158197. doi: 10.1016/j.jallcom.2020.158197
|
[39] |
PATADIYA J, WANG X G, JOSHI G, et al. 3D-printed biomimetic hierarchical nacre architecture: Fracture behavior and analysis[J]. Acs Omega, 2023, 8(21): 18449-18461. doi: 10.1021/acsomega.2c08076
|
[40] |
SUN J X, YU S X, JAMES W Z, et al. 3D printing of ceramic composite with biomimetic toughening design[J]. Additive Manufacturing, 2022, 58: 103027. doi: 10.1016/j.addma.2022.103027
|
[41] |
HE Q Q, ZENG Y S, JIANG L M, et al. Growing recyclable and healable piezoelectric composites in 3D printed bioinspired structure for protective wearable sensor[J]. Nature Communications, 2023, 14(1): 6477. doi: 10.1038/s41467-023-41740-6
|
[42] |
GUO X H, ZHOU D Y, HONG W Q, et al. Biologically emulated flexible sensors with high sensitivity and low hysteresis: Toward electronic skin to a sense of touch[J]. Small, 2022, 18(32): 2203044. doi: 10.1002/smll.202203044
|
[43] |
LI C H, SCHRAMMA N, WANG Z J, et al. Ultrasensitive and robust mechanoluminescent living composites[J]. Science Advances, 2023, 9(42): 8643. doi: 10.1126/sciadv.adi8643
|
[44] |
SUN F Y, LIU L F, LIU T, et al. Vascular smooth muscle-inspired architecture enables soft yet tough self-healing materials for durable capacitive strain-sensor[J]. Nature Communications, 2023, 14(1): 130. doi: 10.1038/s41467-023-35810-y
|
[45] |
CIKALLESHI K, NEXHA A, KISTER T, et al. A printed luminescent flier inspired by plant seeds for eco-friendly physical sensing[J]. Science Advances, 2023, 9(46): 8492. doi: 10.1126/sciadv.adi8492
|
[46] |
ESTEVES C, PALMA S, COSTA H M A, et al. Tackling humidity with designer ionic liquid-based gas sensing soft materials[J]. Advanced Materials, 2022, 34(8): 2107205. doi: 10.1002/adma.202107205
|
[47] |
YOUSSEF S M, SOLIMAN M, SALEH M A, et al. Design and control of soft biomimetic pangasius fish robot using fin ray effect and reinforcement learning[J]. Scientific Reports, 2022, 12(1): 21861. doi: 10.1038/s41598-022-26179-x
|
[48] |
MORADI A, RAFIEI H, DALIRI M, et al. Clinical implementation of a bionic hand controlled with kinetic omyographic signals[J]. Scientific Reports, 2022, 12(1): 14805. doi: 10.1038/s41598-022-19128-1
|
[49] |
LI J F, SOLDATOV I V, TANG X C, et al. Metallic Mimosa pudica: A 3D biomimetic buckling structure made of metallic glasses[J]. Science Advances, 2022, 8(31): 7658. doi: 10.1126/sciadv.abm7658
|
[50] |
DE PASCALI C, NASELLI G A, PALAGI S, et al. 3D-printed biomimetic artificial muscles using soft actuators that contract and elongate[J]. Science Robotics, 2022, 7(68): 4155. doi: 10.1126/scirobotics.abn4155
|
[51] |
WANG Q, LI L, LU X L, et al. Programmable design and fabrication of 3D variable-stiffness structure based on patterned graphene-heating network[J]. Advanced Intelligent Systems, 2023, 5(7): 00032.
|
[52] |
KESHTIBAN M M, ZAND M M, EBADI A, et al. PDMS-based porous membrane for medical applications: Design, development, and fabrication[J]. Biomedical Materials, 2023, 18(4): 045012. doi: 10.1088/1748-605X/acbddb
|
[53] |
ZHANG M, LIN R C, WANG X, et al. 3D printing of Haversian bone-mimicking scaffolds for multicellular delivery in bone regeneration[J]. Science Advances, 2020, 6(12): 6725. doi: 10.1126/sciadv.aaz6725
|
[54] |
KESHTIBAN M M, TAGHVAEI H, NOROOZI R, et al. Biological and mechanical response of graphene oxide surface-treated polylactic acid 3D-printed bone scaffolds: Experimental and numerical approaches[J]. Advanced Engineering Materials, 2024, 26(3): 01260.
|
[55] |
YAN W Q, MAIMAITIMIN M, WU Y, et al. Meniscal fibrocartilage regeneration inspired by meniscal maturational and regenerative process[J]. Science Advances, 2023, 9(45): 8138. doi: 10.1126/sciadv.adg8138
|
[56] |
JORGENSEN A M, GORKUN A, MAHAJAN N, et al. Multicellular bioprinted skin facilitates human-like skin architecture in vivo[J]. Science Translational Medicine, 2023, 15(716): 7547. doi: 10.1126/scitranslmed.adf7547
|
[57] |
ZHU Z, WANG J, PEI X B, et al. Blue-ringed octopus-inspired microneedle patch for robust tissue surface adhesion and active injection drug delivery[J]. Science Advances, 2023, 9(25): 2213. doi: 10.1126/sciadv.adh2213
|
[58] |
ZHOU Y, YANG H R, WANG X Y, et al. A mosquito mouthpart-like bionic neural probe[J]. Microsystems & Nanoengineering, 2023, 9(1): 88.
|
[59] |
FAN X H, DENG C S, GAO H, et al. 3D printing of nanowrinkled architectures via laser direct assembly[J]. Science Advances, 2022, 8(32): 9942. doi: 10.1126/sciadv.abn9942
|
[60] |
AN Q, LI D W, LIAO W H, et al. A novel ultra-wideband electromagnetic-wave-absorbing metastructure inspired by bionic gyroid structures[J]. Advanced Materials, 2023, 35(26): 00659.
|
[61] |
WANG Z L, ZHAN Z H, CHEN L, et al. 3D-printed bionic solar evaporator[J]. Solar Rrl, 2022, 6(7): 2101063. doi: 10.1002/solr.202101063
|
[62] |
HU Z Y, ZHANG Y L, PAN C, et al. Miniature optoelectronic compound eye camera[J]. Nature Communications, 2022, 13(1): 5634. doi: 10.1038/s41467-022-33072-8
|