Li Jialu, Xiao Lihua, Dong Fuyun. INFLUENCE OF THREE DIMENSIONAL AND MULTIDIRECTIONAL BRAID STRUCTURES ON THE PROPERTIES OF COMPOSITES[J]. Acta Materiae Compositae Sinica, 1996, 13(3): 71-75.
Citation: Li Jialu, Xiao Lihua, Dong Fuyun. INFLUENCE OF THREE DIMENSIONAL AND MULTIDIRECTIONAL BRAID STRUCTURES ON THE PROPERTIES OF COMPOSITES[J]. Acta Materiae Compositae Sinica, 1996, 13(3): 71-75.

INFLUENCE OF THREE DIMENSIONAL AND MULTIDIRECTIONAL BRAID STRUCTURES ON THE PROPERTIES OF COMPOSITES

More Information
  • Received Date: June 23, 1994
  • Revised Date: April 19, 1995
  • In this paper a study was made on the properties of three dimensional and multidirectional braided composites with and without axial reinforcement under three braid stuctures 1×1, 1×2 and 1×3. The tensile strength and modulus, flexural strength and modulus of the composites were tested and analyzed. The results show that the three dimensional braided composite has good behaviour and the braid structures have a great influence on it. The fiber apparent angle and fiber volume fraction are two important factors in the improvement of properties. By means of adding in axially non-braiding reinforced fibers, the properties of braided composites including tension and bending have been improved considerably.
  • Related Articles

    [1]HU Chunxing, HOU Yuliang, TIE Ying, LI Cheng, TIAN Keke. Multi-objective optimization of adhesively bonded single-lap joints of carbon fiber reinforced polymer laminates based on genetic algorithm[J]. Acta Materiae Compositae Sinica, 2021, 38(6): 1847-1858. DOI: 10.13801/j.cnki.fhclxb.20200824.001
    [2]ZHANG Qiuyue, AN Luling, YUE Xuande, LI Zhihui, GUO Jia. Optimization of size and layout of pressing force for composite airframe structure assembly based on genetic algorithm[J]. Acta Materiae Compositae Sinica, 2019, 36(6): 1546-1557. DOI: 10.13801/j.cnki.fhclxb.20180816.001
    [3]JIN Dafeng, LIU Zhe, FAN Zhirui. Ply optimization of composite laminate with ply drop based on genetic algorithm[J]. Acta Materiae Compositae Sinica, 2015, 32(1): 236-242. DOI: 10.13801/j.cnki.fhclxb.20140408.001
    [4]XU Yangjian, LI Xiangyu, WANG Xiaogui. Genetic algorithm based inverse analysis for functionally graded material parameters[J]. Acta Materiae Compositae Sinica, 2013, 30(4): 170-176.
    [5]FENG Xiaobing, HUANG Hai, WANG Wei. Strength optimization of large wind turbine blade root on the genetic algorithm[J]. Acta Materiae Compositae Sinica, 2012, (5): 196-202.
    [6]CHEN Luyun, ZHANG Yufang. Composite material structural-acoustic optimization based on genetic algorithm[J]. Acta Materiae Compositae Sinica, 2012, (3): 203-207.
    [7]LI Shuo, XU Yuanming, ZHANG Jun. COMPOSITE STRUCTURAL OPTIMIZATION DESIGN BASED ON NEURAL NETWORK RESPONSE SURFACES[J]. Acta Materiae Compositae Sinica, 2005, 22(5): 134-140.
    [8]ZHANG Zhifeng, CHEN Haoran, LI Xuan, JIANG Yuanxing. HYBRID GENETIC ALGORITHM FOR OPTIMUM DESIGN OFADVANCED GRID COMPOSITE CIRCULAR CYLINDERS[J]. Acta Materiae Compositae Sinica, 2005, 22(2): 166-171.
    [9]YAO Wei, TAN Hui-feng, DU Xing-wen. APPLICATION OF GENETIC ALGORITHM TO MULTIOBJECTIVE OPTIMIZATION OF TIRE STRUCTURE[J]. Acta Materiae Compositae Sinica, 2002, 19(3): 109-113.
    [10]Luo Zhijun, Qiao Xin. OPTIMIZATION OF PLY STACKING SEQUENCE FOR NATURAL FREQUENCIES OF COMPOSITE LAMINATES BY GENETIC ALGORITHM[J]. Acta Materiae Compositae Sinica, 1997, 14(4): 114-118.

Catalog

    Article Metrics

    Article views PDF downloads Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return