Citation: | LI Yang, ZHENG Xinmei, MEI Xin, et al. Research progress on the regulation of filler particle alignment during physics-assisted 3D printing[J]. Acta Materiae Compositae Sinica, 2024, 41(7): 3389-3403. doi: 10.13801/j.cnki.fhclxb.20240030.001 |
[1] |
卢秉恒. 增材制造技术−现状与未来[J]. 中国机械工程, 2020, 31(1): 19-23.
LU Bingheng. Additive manufacturing technology—Current status and future[J]. China Mechanical Engineering, 2020, 31(1): 19-23(in Chinese).
|
[2] |
JANDYAL A, CHATURVEDI I, WAZIR I, et al. 3D printing—A review of processes, materials and applications in industry 4.0[J]. Sustainable Operations and Computers, 2022, 3: 33-42. doi: 10.1016/j.susoc.2021.09.004
|
[3] |
MARTÍNEZ-GARCÍA A, MONZÓN M, PAZ R. Standards for additive manufacturing technologies: Structure and impact[M]//Additive Manufacturing. Amsterdam: Elsevier, 2021: 395-408.
|
[4] |
LIU J, LI W, GUO Y, et al. Improved thermal conductivity of thermoplastic polyurethane via aligned boron nitride platelets assisted by 3D printing[J]. Composites Part A: Applied Science and Manufacturing, 2019, 120: 140-146. doi: 10.1016/j.compositesa.2019.02.026
|
[5] |
HAN R, YANG Q, WANG Z, et al. 3D printing-enabled self-assembling β-nucleating agent alignment: Structural evolution and mechanical performances[J]. Polymer, 2022, 246: 124736. doi: 10.1016/j.polymer.2022.124736
|
[6] |
LIN Z, LIU Y, RAGHAVAN S, et al. Magnetic alignment of hexagonal boron nitride platelets in polymer matrix: Toward high performance anisotropic polymer composites for electronic encapsulation[J]. ACS Applied Materials & Interfaces, 2013, 5(15): 7633-7640.
|
[7] |
程戎, 雷国莉, 王凌峰, 等. 高温高饱和磁通密度软磁铁氧体研究进展[J]. 中国陶瓷, 2018, 54(12): 1-6.
CHENG Rong, LEI Guoli, WANG Lingfeng, et al. Research progress on high-temperature and high saturation magnetic flux density soft magnetic ferrite[J]. Chinese Ceramics, 2018, 54(12): 1-6(in Chinese).
|
[8] |
SAFAEE S, SCHOCK M, JOYEE E B, et al. Field-assisted additive manufacturing of polymeric composites[J]. Additive Manufacturing, 2022, 51: 102642. doi: 10.1016/j.addma.2022.102642
|
[9] |
MARTIN J J, FIORE B E, ERB R M. Designing bioinspired composite reinforcement architectures via 3D magnetic printing[J]. Nature Communications, 2015, 6(1): 8641. doi: 10.1038/ncomms9641
|
[10] |
KOKKINIS D, SCHAFFNER M, STUDART A R. Multimaterial magnetically assisted 3D printing of composite materials[J]. Nature Communications, 2015, 6(1): 8643. doi: 10.1038/ncomms9643
|
[11] |
HENDERSON L, ZAMORA S, AHMED T N, et al. Altering magnetic properties of iron filament PLA using magnetic field assisted additive manufacturing (MFAAM)[J]. Journal of Magnetism and Magnetic Materials, 2021, 538: 168320. doi: 10.1016/j.jmmm.2021.168320
|
[12] |
KAMYSHNY A, MAGDASSI S. Conductive nanomaterials for printed electronics[J]. Small, 2014, 10(17): 3515-3535. doi: 10.1002/smll.201303000
|
[13] |
孙雅杰, 常云龙. 磁控电弧焊接过程及新技术研究进展[J]. 材料导报, 2020, 34(21): 21155-21165.
SUN Yajie, CHANG Yunlong. Research progress on magnetic arc welding process and new technologies[J]. Materials Reports, 2020, 34(21): 21155-21165(in Chinese).
|
[14] |
JOHNSON K, MELCHERT D, GIANOLA D S, et al. Recent progress in acoustic field-assisted 3D-printing of functional composite materials[J]. Mrs Advances, 2021, 6: 636-643.
|
[15] |
LI X, SHAN W, YANG Y, et al. Limpet tooth-inspired painless microneedles fabricated by magnetic field-assisted 3D printing[J]. Advanced Functional Materials, 2020, 31(5): 2003725.
|
[16] |
POHL H A, HAWK I. Separation of living and dead cells by dielectrophoresis[J]. Science, 1966, 152(3722): 647-649. doi: 10.1126/science.152.3722.647.b
|
[17] |
CRANE J S, POHL H A. Theoretical models of cellular dielectrophoresis[J]. Journal of Theoretical Biology, 1972, 37(1): 15-41. doi: 10.1016/0022-5193(72)90113-0
|
[18] |
GOH G L, AGARWALA S, YEONG W Y. Directed and on-demand alignment of carbon nanotube: A review toward 3D printing of electronics[J]. Advanced Materials Interfaces, 2019, 6(4): 1801318. doi: 10.1002/admi.201801318
|
[19] |
WANG Z, CHENG J, HU R, et al. An approach combining additive manufacturing and dielectrophoresis for 3D-structured flexible lead-free piezoelectric composites for electromechanical energy conversion[J]. Journal of Materials Chemistry A, 2021, 9(47): 26767-26776. doi: 10.1039/D1TA07475J
|
[20] |
KAMYSHNY A, MAGDASSI S. Conductive nanomaterials for 2D and 3D printed flexible electronics[J]. Chemical Society Reviews, 2019, 48(6): 1712-1740. doi: 10.1039/C8CS00738A
|
[21] |
JAVIDI R, ZAND M M, DASTANI K. Dielectrophoretic interaction of two particles in a uniform electric field[J]. Microsystem Technologies, 2019, 25(7): 2699-2711. doi: 10.1007/s00542-018-4242-2
|
[22] |
YANG Y, CHEN Z, SONG X, et al. Biomimetic anisotropic reinforcement architectures by electrically assisted nanocomposite 3D printing[J]. Advanced Materials, 2017, 29(11): 1605750. doi: 10.1002/adma.201605750
|
[23] |
YANG Y, LI X, CHU M, et al. Electrically assisted 3D printing of nacre-inspired structures with self-sensing capability[J]. Science Advances, 2019, 5(4): eaau9490. doi: 10.1126/sciadv.aau9490
|
[24] |
ZHANG G, SONG D, JIANG J, et al. Electrically assisted continuous vat photopolymerization 3D printing for fabricating high-performance ordered graphene/polymer composites[J]. Composites Part B: Engineering, 2023, 250: 110449.
|
[25] |
KRISNADI F, NGUYEN L L, MA J, et al. Directed assembly of liquid metal-elastomer conductors for stretchable and self-healing electronics[J]. Advanced Materials, 2020, 32(30): 2001642. doi: 10.1002/adma.202001642
|
[26] |
ZHANG B, HE J, LI X, et al. Micro/nanoscale electrohydrodynamic printing: From 2D to 3D[J]. Nanoscale, 2016, 8(34): 15376-15388. doi: 10.1039/C6NR04106J
|
[27] |
LEE H, SEONG B, KIM J, et al. Direct alignment and patterning of silver nanowires by electrohydrodynamic jet printing[J]. Small, 2014, 10(19): 3918-3922. doi: 10.1002/smll.201400936
|
[28] |
KIM K, BAE J, NOH S H, et al. Direct writing and aligning of small-molecule organic semiconductor crystals via "dragging mode" electrohydrodynamic jet printing for flexible organic field-effect transistor arrays[J]. The Journal of Physical Chemistry Letters, 2017, 8(22): 5492-5500. doi: 10.1021/acs.jpclett.7b02590
|
[29] |
LIASHENKO I, ROSELL-LLOMPART J, CABOT A. Ultrafast 3D printing with submicrometer features using electrostatic jet deflection[J]. Nature Communications, 2020, 11(1): 753.
|
[30] |
COURTNEY C R P, ONG C K, DRINKWATER B W, et al. Manipulation of particles in two dimensions using phase controllable ultrasonic standing waves[J]. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2012, 468: 337-360.
|
[31] |
TUZIUTI T, MASUDA Y, YASUI K, et al. Two-dimensional patterning of inorganic particles in resin using ultrasound-induced plate vibration[J]. Japanese Journal of Applied Physics, 2011, 50: 088006.
|
[32] |
CALEAP M, DRINKWATER B W. Acoustically trapped colloidal crystals that are reconfigurable in real time[J]. Proceedings of the National Academy of Sciences, 2014, 111(17): 6226-6230. doi: 10.1073/pnas.1323048111
|
[33] |
LLEWELLYN-JONES T M, DRINKWATER B W, TRASK R S. 3D printed components with ultrasonically arranged microscale structure[J]. Smart Materials and Structures, 2016, 25(2): 02LT01.
|
[34] |
NIENDORF K, RAEYMAEKERS B. Quantifying macro- and microscale alignment of carbon microfibers in polymer-matrix composite materials fabricated using ultrasound directed self-assembly and 3D-printing[J]. Composites Part A: Applied Science and Manufacturing, 2020, 129: 105713.
|
[35] |
ZHOU X, REN L, LIU Q, et al. Advances in field-assisted 3D printing of bio-inspired composites: From bioprototyping to manufacturing[J]. Macromolecular Bioscience, 2021, 22(3): 2100332.
|
[36] |
GREENHALL J, RAEYMAEKERS B. 3D printing macroscale engineered materials using ultrasound directed self-assembly and stereolithography[J]. Advanced Materials Technologies, 2017, 2(9): 1700122.
|
[37] |
MITRI F G, GARZON F H, SINHA D N. Characterization of acoustically engineered polymer nanocomposite metamaterials using x-ray microcomputed tomography[J]. Review of Scientific Instruments, 2011: 82(3): 034903.
|
[38] |
SAITO M, IMANISHI Y. Host-guest composites containing ultrasonically arranged particles[J]. Journal of Materials Science, 2000, 35: 2373-2377. doi: 10.1023/A:1004745927648
|
[39] |
COLLINO R R, RAY T R, FLEMING R C, et al. Deposition of ordered two-phase materials using microfluidic print nozzles with acoustic focusing[J]. Extreme Mechanics Letters, 2016, 8: 96-106. doi: 10.1016/j.eml.2016.04.003
|
[40] |
WADSWORTH P, NELSON I, PORTER D L, et al. Manufacturing bioinspired flexible materials using ultrasound directed self-assembly and 3D printing[J]. Materials & Design, 2020, 185: 108243.
|
[41] |
ASIF S, CHANSORIA P, SHIRWAIKER R. Ultrasound-assisted vat photopolymerization 3D printing of preferentially organized carbon fiber reinforced polymer composites[J]. Journal of Manufacturing Processes, 2020, 56: 1340-1343. doi: 10.1016/j.jmapro.2020.04.029
|
[42] |
KIM K, KIM J. Vertical filler alignment of boron nitride/epoxy composite for thermal conductivity enhancement via external magnetic field[J]. International Journal of Thermal Sciences, 2016, 100: 29-36. doi: 10.1016/j.ijthermalsci.2015.09.013
|
[43] |
ZHAO R, CHEN C, SHUAI S, et al. Enhanced mechanical properties of Ti6Al4V alloy fabricated by laser additive manufacturing under static magnetic field[J]. Materials Research Letters, 2022, 10(8): 530-538. doi: 10.1080/21663831.2022.2064195
|
[44] |
REN L, ZHOU X, XUE J, et al. Thermal metamaterials with site-specific thermal properties fabricated by 3D magnetic printing[J]. Advanced Materials Technologies, 2019, 4(7): 1900296.
|
[45] |
LIU M, YOUNES H, HONG H, et al. Polymer nanocomposites with improved mechanical and thermal properties by magnetically aligned carbon nanotubes[J]. Polymer, 2019, 166: 81-87. doi: 10.1016/j.polymer.2019.01.031
|
[46] |
JIA B, LI Q, MA L, et al. Magnetic field-assisted sintering of nickel-doped silver microwire to improve densification and conductivity[J]. Journal of Magnetism and Magnetic Materials, 2020, 513: 167232.
|
[47] |
WANG Y, LIU M, FAN F, et al. Enhanced full-spectrum photocatalytic activity of 3D carbon-coated C3N4 nanowires via giant interfacial electric field[J]. Applied Catalysis B: Environmental, 2022, 318: 121829.
|
[48] |
CHAVEZ L A, REGIS J E, DELFIN L C, et al. Electrical and mechanical tuning of 3D printed photopolymer-MWCNT nanocomposites through in situ dispersion[J]. Journal of Applied Polymer Science, 2019, 136(22): 47600.
|
[49] |
KIM H, TORRES F, VILLAGRAN D, et al. 3D printing of BaTiO3/PVDF composites with electric in situ poling for pressure sensor applications[J]. Macromolecular Materials and Engineering, 2017, 302(11): 1700229.
|
[50] |
WEI H, YUAN Y, REN T, et al. High-dielectric PVP@PANI/PDMS composites fabricated via an electric field-assisted approach[J]. Polymers, 2022, 14(20): 4381.
|
[51] |
LI X, LIM K M, ZHAI W. A novel class of bioinspired composite via ultrasound-assisted directed self-assembly digital light 3D printing[J]. Applied Materials Today, 2022, 26: 101388.
|
[52] |
GREENHALL J, HOMEL L, RAEYMAEKERS B. Ultrasound directed self-assembly processing of nanocomposite materials with ultra-high carbon nanotube weight fraction[J]. Journal of Composite Materials, 2019, 53(10): 1329-1336. doi: 10.1177/0021998318801452
|
[53] |
GE Q, LI Z, WANG Z, et al. Projection micro stereolithography based 3D printing and its applications[J]. International Journal of Extreme Manufacturing, 2020, 2(2): 022004.
|
[54] |
WEI C, ZHANG Z Z, CHENG D X, et al. An overview of laser-based multiple metallic material additive manufacturing: From macro- to micro-scales[J]. International Journal of Extreme Manufacturing, 2021, 3(1): 45-69.
|
[55] |
XUE F K, BOUDAOUD H, ROBIN G, et al. Enhancing vibration damping properties of additively manufactured viscoelastic structures through process parameter optimization[J/OL]. Mechanics of Advanced Materials and Structures, 2023: 2023-04-04. https://doi.org/10.1080/15376494.2023.2245827.
|
[56] |
PUTRA N E, MIRZAALI M J, APACHITEI I, et al. Multi-material additive manufacturing technologies for Ti-, Mg-, and Fe-based biomaterials for bone substitution[J]. Acta Biomaterialia, 2020, 109: 1-20. doi: 10.1016/j.actbio.2020.03.037
|
[57] |
BANDYOPADHYAY A, HEER B. Additive manufacturing of multi-material structures[J]. Materials Science & Engineering R: Reports, 2018, 129: 1-16.
|
[58] |
NGO T D, KASHANI A, IMBALZANO G, et al. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges[J]. Composites Part B: Engineering, 2018, 143: 172-196. doi: 10.1016/j.compositesb.2018.02.012
|
[59] |
COOGAN T J, KAZMER D O. Prediction of interlayer strength in material extrusion additive manufacturing[J]. Additive Manufacturing, 2020, 35: 101368.
|
[60] |
OMAIRI A, ISMAIL Z H. Towards machine learning for error compensation in additive manufacturing[J]. Applied Sciences-Basel, 2021, 11(5): 2375.
|
[61] |
WANG Y B, ZHENG P, PENG T, et al. Smart additive manufacturing: Current artificial intelligence-enabled methods and future perspectives[J]. Science China Technological Sciences, 2020, 63(9): 1600-1611. doi: 10.1007/s11431-020-1581-2
|
[62] |
BI K M, LIN D, LIAO Y L, et al. Additive manufacturing embraces big data[J]. Progress in Additive Manufacturing, 2021, 6(2): 181-197. doi: 10.1007/s40964-021-00172-8
|
[63] |
IKRAM H, AL RASHID A, KOÇ M. Additive manufacturing of smart polymeric composites: Literature review and future perspectives[J]. Polymer Composites, 2022, 43(9): 6355-6380. doi: 10.1002/pc.26948
|