Citation: | WANG Haohuan, QIN Ling, WANG Tianxing, et al. Preparation and electrical properties of recyclable high performance dual-curing epoxy resin[J]. Acta Materiae Compositae Sinica, 2024, 41(8): 4103-4112. doi: 10.13801/j.cnki.fhclxb.20240003.004 |
[1] |
刘美琦. 电气化交通辅助逆变电源用LCC逆变器及其控制研究[D]. 长沙: 湖南大学, 2022.
LIU Meiqi. Research on LCC inverter and its control for electrified transportation auxiliary inverter[D]. Changsha: Hunan University, 2022(in Chinese).
|
[2] |
王洪苹, 胡燕祝, 庄育锋, 等. 电气化交通路网的脆弱性分析[J]. 清华大学学报(自然科学版), 2023, 63(10): 1584-1597.
WANG Hongping, HU Yanzhu, ZHUANG Yufeng, et al. Analyzing the vulnerability of electrified transportation road networks[J]. Journal of Tsinghua University (Science & Technology), 2023, 63(10): 1584-1597(in Chinese).
|
[3] |
徐贺, 包贤哲, 王连杰, 等. 电气化交通中的微型燃机及其电能变换技术综述[J]. 电气工程学报, 2022, 17(2): 2-18.
XU He, BAO Xianzhe, WANG Lianjie, et al. Overview of micro-gas turbines in electrified transportation and their electric energy conversion technology[J]. Jounal of Electrical Engineering, 2022, 17(2): 2-18(in Chinese).
|
[4] |
LI Q, DU B, KONG X. Effect of extremely cold weather and shrinkage stress on interfacial discharge between epoxy and silicone rubber in HV cable terminations[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2023, 30(5): 2386-2393. doi: 10.1109/TDEI.2023.3266308
|
[5] |
HUANG J, YE Z, ZHANG G, et al. Study on a 110 kV combined prefabricated joint fault caused by premature failure of grounding grid[J]. Engineering Failure Analysis, 2022, 141: 106701. doi: 10.1016/j.engfailanal.2022.106701
|
[6] |
WU Z, LIN B, FAN J, et al. Effect of dielectric relaxation of epoxy resin on dielectric loss of medium-frequency transformer[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2022, 29(5): 1651-1658. doi: 10.1109/TDEI.2022.3193652
|
[7] |
FANG Z, YANG X, ZENG H, et al. Research on the performance of green and environmentally friendly epoxy resin impregnated paper 110 kV current transformer[J]. AIP Advances, 2023, 13(8): 085120. doi: 10.1063/5.0166166
|
[8] |
QIAN Z, LIU Y, LIU C, et al. Design and skid resistance evaluation of skeleton-dense epoxy asphalt mixture for steel bridge deck pavement[J]. Construction and Building Materials, 2016, 114: 851-863. doi: 10.1016/j.conbuildmat.2016.03.210
|
[9] |
ALAMRI M, LU Q. Investigation on the inclusion of reclaimed diluted epoxy asphalt pavement materials into hot mix asphalt[J]. Construction and Building Materials, 2022, 361: 129710. doi: 10.1016/j.conbuildmat.2022.129710
|
[10] |
KONDRATENKO Y A, GOLUBEVA N K, KOCHINA T A, et al. Field tests of protective epoxy coatings in a humid tropical climate[J]. Glass Physics and Chemistry, 2023, 49(1): 69-74. doi: 10.1134/S1087659622600818
|
[11] |
KONDRATENKO Y A, GOLUBEVA N K, IVANOVA A G, et al. Improvement of the physicomechanical and corrosion-protective properties of coatings based on a cycloaliphatic epoxy matrix[J]. Russian Journal of Applied Chemistry, 2021, 94(11): 1489-1498. doi: 10.1134/S1070427221110045
|
[12] |
TÜREL T, TOMOVIĆ Ž. Chemically recyclable and upcyclable epoxy resins derived from vanillin[J]. ACS Sustainable Chemistry & Engineering, 2023, 11(22): 8308-8316.
|
[13] |
RASHID M A, ZHU S, ZHANG L, et al. High-performance and fully recyclable epoxy resins cured by imine-containing hardeners derived from vanillin and syringaldehyde[J]. European Polymer Journal, 2023, 187: 111878. doi: 10.1016/j.eurpolymj.2023.111878
|
[14] |
JIANG Y, WANG S, DONG W, et al. High-strength, degradable and recyclable epoxy resin based on imine bonds for its carbon-fiber-reinforced composites[J]. Materials, 2023, 16(4): 1604. doi: 10.3390/ma16041604
|
[15] |
LI H, LI S, LI Q, et al. Universal, mechanically robust and self-healing superhydrophobic coatings enabled by covalent adaptable networks of disulfide bonds[J]. Progress in Organic Coatings, 2023, 175: 107362. doi: 10.1016/j.porgcoat.2022.107362
|
[16] |
YANG Z, WANG Q, WANG T. Dual-triggered and thermally reconfigurable shape memory graphene-vitrimer composites[J]. ACS Applied Materials & Interfaces, 2016, 8(33): 21691-21699.
|
[17] |
ZHAO S, ABU-OMAR M M. Catechol-mediated glycidylation toward epoxy vitrimers/polymers with tunable properties[J]. Macromolecules, 2019, 52(10): 3646-3654. doi: 10.1021/acs.macromol.9b00334
|
[18] |
LIU Y, TANG Z, CHEN Y, et al. Engineering of β-hydroxyl esters into elastomer-nanoparticle interface toward malleable, robust, and reprocessable vitrimer composites[J]. ACS Applied Materials & Interfaces, 2018, 10(3): 2992-3001.
|
[19] |
NIU X, WANG F, LI X, et al. Using Zn2+ ionomer to catalyze transesterification reaction in epoxy vitrimer[J]. Industrial & Engineering Chemistry Research, 2019, 58(14): 5698-5706.
|
[20] |
JIANG Y, RAN Z, WU Y, et al. Reversible fluorescent adhesives based on covalent adaptable networks with dynamic AIE crosslinking: In situ visualization of adhesion capability[J]. Chemical Communications, 2023, 59(83): 12423-12426.
|
[21] |
SUN J, LIANG M, YIN L, et al. Interfacial compatibility of core-shell cellulose nanocrystals for improving dynamic covalent adaptable networks' fracture resistance in nanohybrid vitrimer composites[J]. ACS Applied Materials & Interfaces, 2023, 15(33): 39786-39796.
|
[22] |
SNYDER R L, FORTMAN D J, DE HOE G X, et al. Reprocessable acid-degradable polycarbonate vitrimers[J]. Macromolecules, 2018, 51(2): 389-397. doi: 10.1021/acs.macromol.7b02299
|
[23] |
HAN J, LIU T, HAO C, et al. A catalyst-free epoxy vitrimer system based on multifunctional hyperbranched polymer[J]. Macromolecules, 2018, 51(17): 6789-6799. doi: 10.1021/acs.macromol.8b01424
|
[24] |
JIANG L, TIAN Y, CHENG J, et al. A biomass-based Schiff base vitrimer with both excellent performance and multiple degradability[J]. Polymer Chemistry, 2021, 12(45): 6527-6537. doi: 10.1039/D1PY01003D
|
[25] |
孙文杰, 张磊, 李天宇, 等. 基于动态受阻脲键氢化环氧树脂的介电性能与可修复性能[J]. 高电压技术, 2022, 48(7): 2668-2676.
SUN Wenjie, ZHANG Lei, LI Tianyu, et al. Dielectric and repairable properties of hydrogenated epoxy resin based on dynamic hindered urea bonds[J]. High Voltage Engineering, 2022, 48(7): 2668-2676(in Chinese).
|
[26] |
MEMON H, LIU H, RASHID M A, et al. Vanillin-based epoxy vitrimer with high performance and closed-loop recyclability[J]. Macromolecules, 2020, 53(2): 621-630. doi: 10.1021/acs.macromol.9b02006
|
[27] |
TIAN P X, LI Y D, WENG Y, et al. Reprocessable, chemically recyclable, and flame-retardant biobased epoxy vitrimers[J]. European Polymer Journal, 2023, 193: 112078. doi: 10.1016/j.eurpolymj.2023.112078
|
[28] |
CHEN M, ZHOU L, WU Y, et al. Rapid stress relaxation and moderate temperature of malleability enabled by the synergy of disulfide metathesis and carboxylate transesterification in epoxy vitrimers[J]. ACS Macro Letters, 2019, 8(3): 255-260. doi: 10.1021/acsmacrolett.9b00015
|
[29] |
LI W, XIAO L, WANG Y, et al. Thermal-induced self-healing bio-based vitrimers: Shape memory, recyclability, degradation, and intrinsic flame retardancy[J]. Polymer Degradation and Stability, 2022, 202: 110039. doi: 10.1016/j.polymdegradstab.2022.110039
|
[30] |
张樱凡, 黄正勇, 王浩欢, 等. 可回收和高性能3D打印树脂的制备方法[J]. 高电压技术, 2023, 49(3): 962-970.
ZHANG Yingfan, HUANG Zhengyong, WANG Haohuan, et al. Preparation of recyclable and high-performance 3D printing resins[J]. High Voltage Engineering, 2023, 49(3): 962-970(in Chinese).
|
[31] |
SUN W, LUO J, ZHANG L, et al. Insulating silicones based on dynamic hindered urea bonds with high dielectric healability and recyclability[J]. ACS Applied Polymer Materials, 2021, 3(11): 5622-5631. doi: 10.1021/acsapm.1c00948
|
[32] |
SOMAN B, SCHWEIZER K, EVANS C, et al. Fragile glass formation and non-arrhenius upturns in ethylene vitrimers revealed by dielectric spectroscopy[J]. Macromolecules, 2023, 56(1): 166-177. doi: 10.1021/acs.macromol.2c01657
|
[33] |
中国国家标准化管理委员会. 塑料 弯曲性能的测定: GB/T 9341—2008[S]. 北京: 中国标准出版社, 2008.
Standardization Administration of the People's Republic of China. Plastics—Determination of flexural properties: GB/T 9341—2008[S]. Beijing: China Standards Press, 2008(in Chinese).
|
[34] |
中国国家标准化管理委员会. 塑料 拉伸性能的测定 第2部分: 模塑和挤塑塑料的试验条件: GB/T 1040.2—2006[S]. 北京: 中国标准出版社, 2006.
Standardization Administration of the People's Republic of China. Plastics—Determination of tensile properties—Part 2: Test conditions for moulding and extrusion plastics: GB/T 1040.2—2006[S]. Beijing: China Standards Press, 2006(in Chinese).
|
[35] |
中国国家标准化管理委员会. 绝缘材料 电气强度试验方法 第1部分: 工频下试验: GB/T 1408.1—2016[S]. 北京: 中国标准出版社, 2016.
Standardization Administration of the People's Republic of China. Insulating materials—Test methods for electric strength—Part 1: Test at power frequencies: GB/T 1408.1—2016[S]. Beijing: China Standards Press, 2006(in Chinese).
|
[36] |
CHEN Z. Recyclable thermosetting polymers for digital light processing 3D printing[J]. Materials and Design, 2021, 197: 109189. doi: 10.1016/j.matdes.2020.109189
|
[37] |
ZHANG B, KOWSARI K, SERJOUEI A, et al. Reprocessable thermosets for sustainable three-dimensional printing[J]. Nature Communications, 2018, 9(1): 1831. doi: 10.1038/s41467-018-04292-8
|
[38] |
MONTARNAL D, CAPELOT M, TOURNILHAC F, et al. Silica-like malleable materials from permanent organic networks[J]. Science, 2011, 334(6058): 965-968. doi: 10.1126/science.1212648
|