Citation: | JI Wenbin, WANG Zihao, DAI Shijie, et al. Design, preparation and mechanical properties of microwave sintered TiB2-based ceramic tools with complex edge shape[J]. Acta Materiae Compositae Sinica, 2024, 41(7): 3777-3789. doi: 10.13801/j.cnki.fhclxb.20231114.001 |
[1] |
黄小晓, 涂赣峰, 王术新, 等. TiB2涂层的制备及其应用研究进展[J]. 稀有金属材料与工程, 2022, 51(3): 1087-1099.
HUANG Xiaoxiao, TU Ganfeng, WANG Shuxin, et al. Research progress on preparation and application of TiB2 coating[J]. Rare Metal Materials and Engineering, 2022, 51(3): 1087-1099(in Chinese).
|
[2] |
SHUSTER L S, FOX-RABINOVICH G S, CHERTOVSKIKH S V. Influence of cutting conditions on the wear resistance of tools with a TiB2 coating during titanium alloy machining[J]. Journal of Friction and Wear, 2021, 42(6): 466-472. doi: 10.3103/S1068366621060118
|
[3] |
张剑平, 张萌, 艾云龙. TiB2在原位反应制备铜基复合材料中的应用现状[J]. 特种铸造及有色合金, 2008(7): 544-547, 490.
ZHANG Jianping, ZHANG Meng, AI Yunlong. Application status of TiB2 in in-situ reaction preparation of copper matrix composites[J]. Special Casting & Nonferrous Alloys, 2008(7): 544-547, 490(in Chinese).
|
[4] |
GONG F, ZHAO J, LIU G, et al. Design and fabrication of TiB2-TiC-Al2O3 gradient composite ceramic tool materials reinforced by VC/Cr3C2 additives[J]. Ceramics International, 2021, 47(14): 20341-20351. doi: 10.1016/j.ceramint.2021.04.042
|
[5] |
WU N, XUE F, YANG Q, et al. Microstructure and mechanical properties of TiB2-based composites with high volume fraction of Fe-Ni additives prepared by vacuum pressureless sintering[J]. Ceramics International, 2017, 43(1): 1394-1401. doi: 10.1016/j.ceramint.2016.10.100
|
[6] |
YAN S R, LYU Z J, FANG L J. Effects of SiC amount and morphology on the properties of TiB2-based composites sintered by hot-pressing[J]. Ceramics International, 2020, 46(11): 18813-18825. doi: 10.1016/j.ceramint.2020.04.199
|
[7] |
刘元会, 石少杰, 曹宇航, 等. 热压烧结制备碳纤维/氧化铝陶瓷复合材料的负介电行为[J]. 复合材料学报, 2022, 39(8): 4085-4092. doi: 10.13801/j.cnki.fhclxb.20211012.003
LIU Yuanhui, SHI Shaojie, CAO Yuhang, et al. Negative dielectric behavior of carbon fiber/alumina ceramic composites prepared by hot press sintering[J]. Acta Materiae Compositae Sinica, 2022, 39(8): 4085-4092(in Chinese). doi: 10.13801/j.cnki.fhclxb.20211012.003
|
[8] |
DING X, PAN K, LIU Z, et al. Effects of TiC particle size on microstructures and mechanical properties of B4C-TiB2 composites prepared by reactive hot-press sintering of TiC-B mixtures[J]. Ceramics International, 2020, 46(8): 10425-10430. doi: 10.1016/j.ceramint.2020.01.041
|
[9] |
CHEN D, ZHANG K, ZENG J, et al. High-strength TiB2-B4C composite ceramics sintered by spark plasma sintering[J]. International Journal of Applied Ceramic Technology, 2022, 19(4): 1949-1955. doi: 10.1111/ijac.14051
|
[10] |
张新杰, 崔洪芝, 王明亮, 等. 放电等离子烧结Ni/TiB2-TiC复合材料微观组织及磨损性能[J]. 复合材料学报, 2018, 35(1): 158-167.
ZHANG Xinjie, CUI Hongzhi, WANG Mingliang, et al. Microstructure and wear properties of Ni/TiB2-TiC composites prepared by spark plasma sintering[J]. Acta Materiae Compositae Sinica, 2018, 35(1): 158-167(in Chinese).
|
[11] |
XU G F, ZHUANG H R, WU F Y, et al. Microwave reaction sintering of α-β-sialon composite ceramics[J]. Journal of the European Ceramic Society, 1997, 17(5): 675-680. doi: 10.1016/S0955-2219(96)00114-8
|
[12] |
SINGHAL C, MURTAZA Q, PARVEJ. Microwave sintering of advanced composites materials: A review[J]. Materials Today: Proceedings, 2018, 5(11): 24287-24298. doi: 10.1016/j.matpr.2018.10.224
|
[13] |
RAMESH S, ZULKIFLI N, TAN C Y, et al. Comparison between microwave and conventional sintering on the properties and microstructural evolution of tetragonal zirconia[J]. Ceramics International, 2018, 44(8): 8922-8927. doi: 10.1016/j.ceramint.2018.02.086
|
[14] |
AGRAWAL D, RAGULYA A, DEMIRSKYI D. Tough ceramics by microwave sintering of nanocrystalline titanium diboride ceramics[J]. Ceramics International, 2014, 40(1): 1303-1310.
|
[15] |
DEMIRSKYI D, CHENG J, AGRAWAL D, et al. Densification and grain growth during microwave sintering of titanium diboride[J]. Scripta Materialia, 2013, 69(8): 610-613. doi: 10.1016/j.scriptamat.2013.07.012
|
[16] |
方一航, 夏伶勤, 陈光, 等. 成型压力对Ti(C, N)基金属陶瓷微观组织结构和力学性能的影响[J]. 材料与冶金学报, 2023, 22(3): 249-255.
FANG Yihang, XIA Lingqin, CHEN Guang, et al. Effect of molding pressure on microstructure and mechanical properties of Ti(C, N) matrix ceramics[J]. Journal of Materials and Metallurgy, 2023, 22(3): 249-255(in Chinese).
|
[17] |
ZONG H, ZHANG C, RU H, et al. Effect of forming pressure on microstructure and mechanical properties of B4C-SiC-Si ceramic composites[J]. Key Engineering Materials, 2018, 768(1): 152-158.
|
[18] |
SARAVANAMURUGAN S, SUNDAR B S, PRANAV R S, et al. Optimization of cutting tool geometry and machining parameters in turning process[J]. Materials Today: Proceedings, 2021, 38(5): 3351-3357.
|
[19] |
JI J H, YANG Q, CHEN P, et al. An improved mathematical model of cutting temperature in end milling Al7050 based on the influence of tool geometry parameters and milling parameters[J]. Mathematical Problems in Engineering, 2021, 2021: 5705091.
|
[20] |
MANUEL N, BELTRÃO D, GALVÃO I, et al. Influence of tool geometry and process parameters on torque, temperature, and quality of friction stir welds in dissimilar al alloys[J]. Materials, 2021, 14(20): 6020. doi: 10.3390/ma14206020
|
[21] |
胡波, 赵先锋, 史红艳, 等. 基于AdvantEdge切削工艺参数及刀具几何参数对切削力影响研究[J]. 组合机床与自动化加工技术, 2021(7): 128-132. doi: 10.13462/j.cnki.mmtamt.2021.07.030
HU Bo, ZHAO Xianfeng, SHI Hongyan, et al. Research on the influence of cutting process parameters and tool geometry parameters on cutting force based on advantedge[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2021(7): 128-132(in Chinese). doi: 10.13462/j.cnki.mmtamt.2021.07.030
|
[22] |
殷增斌, 朱智勇, 王子祥, 等. 复杂刃形陶瓷刀具微波烧结技术研究[J]. 中国机械工程, 2022, 33(8): 899-907.
YIN Zengbin, ZHU Zhiyong, WANG Zixiang, et al. Research on microwave sintering technology of complex blade ceramic cutte[J]. China Mechanical Engineering, 2022, 33(8): 899-907(in Chinese).
|
[23] |
洪东波, 殷增斌, 陈为友, 等. 微波烧结复杂刃形SiAlON陶瓷刀具铣削GH4169高温合金性能研究[J]. 中国机械工程, 2023, 34(7): 770-779, 788.
HONG Dongbo, YIN Zengbin, CHEN Weiyou, et al. Study on milling performance of GH4169 superalloy with complex blade SiAlON ceramic tool by microwave sintering[J]. China Mechanical Engineering, 2023, 34(7): 770-779, 788(in Chinese).
|
[24] |
程德俊, 许丰, 张春燕, 等. 薄壁件铣削加工刀具几何参数优化[J]. 组合机床与自动化加工技术, 2020(4): 130-133, 138. doi: 10.13462/j.cnki.mmtamt.2020.04.030
CHENG Dejun, XU Feng, ZHANG Chunyan, et al. Optimization of milling cutter parameters for machining thin-walled parts[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2020(4): 130-133, 138(in Chinese). doi: 10.13462/j.cnki.mmtamt.2020.04.030
|
[25] |
TOKTAŞ A. Determination of Vickers indentation fracture toughness of boronised alloyed ductile iron[J]. Transactions of the Institute of Metal Finishing, 2019, 97(5): 271-276. doi: 10.1080/00202967.2019.1646458
|
[26] |
达丽梅, 周后明, 周金虎, 等. Al2O3颗粒增韧TiB2-Ti (C(0.5), N(0.5))复合陶瓷刀具的力学性能及微观结构[J]. 材料科学与工程学报, 2022, 40(5): 785-790.
DA Limei, ZHOU Houming, ZHOU Jinhu, et al. Mechanical properties and microstructure of TiB2-Ti (C(0.5), N(0.5)) composite ceramic tools toughened with Al2O3 particles[J]. Journal of Materials Science and Engineering, 2022, 40(5): 785-790(in Chinese).
|
[27] |
张广森, 季文彬, 戴士杰, 等. 微波烧结Ti(C, N)-WC-Al2O3/Ti(C, N)-WC叠层陶瓷的微观结构和力学性能[J]. 硅酸盐学报, 2022, 50(12): 3212-3221.
ZHANG Guangsen, JI Wenbin, DAI Shijie, et al. Structural design and mechanical properties of microwave sintered Ti(C, N)-WC-Al2O3/Ti(C, N)-WC laminated ceramics[J]. Bulletin of the Chinese Ceramic Society, 2022, 50(12): 3212-3221(in Chinese).
|
[28] |
王波, 王杨, 董中奇, 等. 压制压力对机械合金化Cu20Fe80合金微波烧结组织及性能的影响[J]. 粉末冶金工业, 2018, 28(3): 24-28.
WANG Bo, WANG Yang, DONG Zhongqi, et al. Effect of compaction pressure on microstructure and properties of mechanically alloyed Cu20Fe80 alloy during microwave sintering[J]. Powder Metallurgy Industry, 2018, 28(3): 24-28(in Chinese).
|
[29] |
NATALIA D L, WIJANARKO R, ANGELA I, et al. Influence of compaction pressure on density, bending strength, and microstructures of Al2O3-SiC-ZrO2 ceramic matrix composites with Nb2O5 additives[J]. Materials Science Forum, 2018, 923(1): 61-65.
|
[30] |
周后明, 陈皓月, 李神贵. 基于梯度结构的Al2O3/ZrO2陶瓷刀具材料的制备及其力学性能[J]. 中国机械工程, 2023, 34(10): 1199-1207. doi: 10.3969/j.issn.1004-132X.2023.10.009
ZHOU Houming, CHEN Haoyue, LI Shengui. Preparation and mechanical properties of Al2O3/ZrO2 ceramic tool materials based on gradient structure[J]. China Mechanical Engineering, 2023, 34(10): 1199-1207(in Chinese). doi: 10.3969/j.issn.1004-132X.2023.10.009
|