Citation: | ZHOU Hongyuan, FAN Jiale, WANG Xiaojuan, et al. Energy absorption of foam concrete filled aluminum tube composite cladding[J]. Acta Materiae Compositae Sinica, 2023, 40(5): 2885-2896. doi: 10.13801/j.cnki.fhclxb.20220811.004 |
[1] |
杜善义. 先进复合材料与航空航天[J]. 复合材料学报, 2007, 24(1):1-12. doi: 10.3321/j.issn:1000-3851.2007.01.001
DU Shanyi. Advanced composite materials and aerospace engineering[J]. Acta Materiae Compositae Sinica,2007,24(1):1-12(in Chinese). doi: 10.3321/j.issn:1000-3851.2007.01.001
|
[2] |
WANG Z, ZHOU Y, WANG X, et al. Multi-objective optimization design of a multi-layer honeycomb sandwich structure under blast loading[J]. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering,2017,231(10):1449-1458. doi: 10.1177/0954407016672606
|
[3] |
周昊, 郭锐, 刘荣忠, 等. 碳纤维增强聚合物复合材料方形蜂窝夹层结构水下爆炸动态响应数值模拟[J]. 复合材料学报, 2019, 36(5):1226-1234.
ZHOU Hao, GUO Rui, LIU Rongzhong, et al. Simulations on dynamic responses of carbon fiber reinforced polymer composite sandwich plates with square honeycomb cores subjected to water blast[J]. Acta Materiae Compositae Sinica,2019,36(5):1226-1234(in Chinese).
|
[4] |
ZHANG J, ZHOU R, WANG M, et al. Dynamic response of double-layer rectangular sandwich plates with metal foam cores subjected to blast loading[J]. International Journal of Impact Engineering,2018,122:265-275. doi: 10.1016/j.ijimpeng.2018.08.016
|
[5] |
薛启超, 邹广平, 何建, 等. 聚氨酯弹性体隔板夹层结构的等效参数计算[J]. 复合材料学报, 2017, 34(3):564-573.
XUE Qichao, ZOU Guangping, HE Jian, et al. Equivalent parameters calculation for sandwich plate with polyurethane elastomer core reinforced by crossing walls[J]. Acta Materiae Compositae Sinica,2017,34(3):564-573(in Chinese).
|
[6] |
宋延泽, 王志华, 赵隆茂, 等. 撞击载荷下泡沫铝夹层板的动力响应[J]. 爆炸与冲击, 2010, 30(3):301-307. doi: 10.11883/1001-1455(2010)03-0301-07
SONG Yanze, WANG Zhihua, ZHAO Longmao, et al. Dynamic response of foam sandwich plates subjected to impact loading[J]. Explosion and Shock Waves,2010,30(3):301-307(in Chinese). doi: 10.11883/1001-1455(2010)03-0301-07
|
[7] |
周宏元, 贾昆程, 王小娟, 等. 负泊松比三明治结构填充泡沫混凝土的面内压缩性能[J]. 复合材料学报, 2020, 37(8):2005-2014.
ZHOU Hongyuan, JIA Kuncheng, WANG Xiaojuan, et al. In-plane compression properties of negative Poisson's ratio sandwich structure filled with foam concrete[J]. Acta Materiae Compositae Sinica,2020,37(8):2005-2014(in Chinese).
|
[8] |
柯力, 王自力, 王哲, 等. 空中爆炸冲击载荷下折叠式夹层板塑性动力响应研究[J]. 哈尔滨工程大学学报, 2020, 41(6):797-804. doi: 10.11990/jheu.201901039
KE Li, WANG Zili, WANG Zhe, et al. Plastic dynamic response of folded sandwich panels under air-blast loading[J]. Journal of Harbin Engineering University,2020,41(6):797-804(in Chinese). doi: 10.11990/jheu.201901039
|
[9] |
ZHOU H Y, ZHANG X J, WANG X J, et al. Response of foam concrete-filled aluminum honeycombs subject to quasi-static and dynamic compression[J]. Composite Structures,2020,239:112025. doi: 10.1016/j.compstruct.2020.112025
|
[10] |
XU F X, ZHANG X, ZHANG H. A review on functionally graded structures and materials for energy absorption[J]. Engineering Structures,2018,171:309-325. doi: 10.1016/j.engstruct.2018.05.094
|
[11] |
BAROUTAJI A, ARJUNAN A, STANFORD M, et al. Deformation and energy absorption of additively manufactured functionally graded thickness thin-walled circular tubes under lateral crushing[J]. Engineering Structures,2021,226:111324. doi: 10.1016/j.engstruct.2020.111324
|
[12] |
刘伟明, 程和法, 黄笑梅, 等. 开孔泡沫铝填充圆管的准静态压缩行为[J]. 爆炸与冲击, 2009, 29(6):654-658. doi: 10.3321/j.issn:1001-1455.2009.06.017
LIU Weiming, CHENG Hefa, HUANG Xiaomei, et al. Quasi-static compression behaviors of cylindrical tubes filled with open-cell aluminum foam[J]. Explosion and Shock Waves,2009,29(6):654-658(in Chinese). doi: 10.3321/j.issn:1001-1455.2009.06.017
|
[13] |
张光成, 郭超群, 闫治坤, 等. 泡沫钢填充管的准静态压缩变形模式、力学性能及吸能特性[J]. 材料导报, 2021, 35(24):24158-24163. doi: 10.11896/cldb.20080301
ZHANG Guangcheng, GUO Chaoqun, YAN Zhikun, et al. Quasi-static compression deformation mode, mechanical property and energy absorption performance of steel foam filled tube[J]. Materials Reports,2021,35(24):24158-24163(in Chinese). doi: 10.11896/cldb.20080301
|
[14] |
YUEN S C K, CUNLIFFE G, DU PLESSIS M C. Blast response of cladding sandwich panels with tubular cores[J]. International Journal of Impact Engineering,2017,110:266-278. doi: 10.1016/j.ijimpeng.2017.04.016
|
[15] |
WANG C, XU B, YUEN S C K. Numerical analysis of cladding sandwich panels with tubular cores subjected to uniform blast load[J]. International Journal of Impact Engi-neering,2019,133:103345. doi: 10.1016/j.ijimpeng.2019.103345
|
[16] |
RAMAMURTHY K, NAMBIAR E K K, RANJANI G I S. A classification of studies on properties of foam concrete[J]. Cement and Concrete Composites,2009,31(6):388-396. doi: 10.1016/j.cemconcomp.2009.04.006
|
[17] |
CRANE B, GOODWORTH A D, LIQUORI M, et al. Multidisciplinary testing of floor pads on stability, energy absorption, and ease of hospital use for enhanced patient safety[J]. Journal of Patient Safety,2016,12(3):132-139. doi: 10.1097/PTS.0000000000000079
|
[18] |
宋强, 张鹏, 鲍玖文, 等. 泡沫混凝土的研究进展与应用[J]. 硅酸盐学报, 2021, 49(2):398-410. doi: 10.14062/j.issn.0454-5648.20200316
SONG Qiang, ZHANG Peng, BAO Jiuwen, et al. Research progress and application of foam concrete[J]. Journal of the Chinese Ceramic Society,2021,49(2):398-410(in Chinese). doi: 10.14062/j.issn.0454-5648.20200316
|
[19] |
周明杰, 王娜娜, 赵晓艳, 等. 泡沫混凝土的研究和应用最新进展[J]. 混凝土, 2009(4):104-107. doi: 10.3969/j.issn.1002-3550.2009.04.031
ZHOU Mingjie, WANG Nana, ZHAO Xiaoyan, et al. Latest development of research and application on foam concrete[J]. Concrete,2009(4):104-107(in Chinese). doi: 10.3969/j.issn.1002-3550.2009.04.031
|
[20] |
支旭东, 郭梦慧, 王臣, 等. 泡沫混凝土填充圆钢管的轴压力学性能[J]. 浙江大学学报(工学版), 2019, 53(10):1927-1935, 1945. doi: 10.3785/j.issn.1008-973X.2019.10.010
ZHI Xudong, GUO Menghui, WANG Chen, et al. Mechani-cal properties of circular steel tube filled with foam concrete under axial loads[J]. Journal of Zhejiang University (Engineering Science),2019,53(10):1927-1935, 1945(in Chinese). doi: 10.3785/j.issn.1008-973X.2019.10.010
|
[21] |
李方贤, 李建新, 肖民, 等. 轻钢龙骨-泡沫混凝土复合墙板的抗冲击性能[J]. 硅酸盐通报, 2022, 41(1):68-75. doi: 10.16552/j.cnki.issn1001-1625.20211123.002
LI Fangxian, LI Jianxin, XIAO Min, et al. Impact resistance of lightweight steel-framed foamed concrete composite wall panels[J]. Journal of the Chinese Ceramic Society,2022,41(1):68-75(in Chinese). doi: 10.16552/j.cnki.issn1001-1625.20211123.002
|
[22] |
ZHOU H Y, ZHANG X J, WANG X J, et al. Improving energy absorption capacity of foam concrete with gradient and layered architecture[J]. Construction and Building Materials,2022,319:126140. doi: 10.1016/j.conbuildmat.2021.126140
|
[23] |
ZHOU H Y, JIA K C, WANG X J, et al. Experimental and numerical investigation of low velocity impact response of foam concrete filled auxetic honeycombs[J]. Thin-Walled Structures,2020,154:106898. doi: 10.1016/j.tws.2020.106898
|
[24] |
中华人民共和国住房和城乡建设部. 泡沫混凝土应用技术规程: JGJ/T 341—2014[S]. 北京: 中国建筑工业出版社, 2014.
Ministry of Housing and Urban-Rural Development of the People's Republic of China. Technical specification for application of foamed concrete: JGJ/T 341—2014[S]. Beijing: China Architecture & Building Press, 2014(in Chinese).
|
[25] |
MILTZ J, GRUENBAUM G. Evaluation of cushioning pro-perties of plastic foams from compressive measurements[J]. Polymer Engineering & Science,1981,21(15):1010-1014.
|
[26] |
BAO R H, YU T X. Impact and rebound of an elastic-plastic ring on a rigid target[J]. International Journal of Mechani-cal Sciences,2015,91:55-63. doi: 10.1016/j.ijmecsci.2014.03.031
|
[27] |
SHEN J H, LU G X, RUAN D, et al. Lateral plastic collapse of sandwich tubes with metal foam core[J]. International Journal of Mechanical Sciences,2015,91:99-109. doi: 10.1016/j.ijmecsci.2013.11.016
|