Citation: | JIANG Wei, ZHOU Yue, YANG Fei, et al. Infrared-assisted automated fiber placement process on the structure and properties of continuous glass fiber reinforced polypropylene composites[J]. Acta Materiae Compositae Sinica, 2023, 40(4): 2015-2025. doi: 10.13801/j.cnki.fhclxb.20220513.004 |
[1] |
王凯, 刘寒松, 肇研. 连续纤维增强热塑性树脂基复合材料自动铺放技术研究进展[J]. 航空制造技术, 2021, 64(11):41-49.
WANG Kai, LIU Hansong, ZHAO Yan. Research progress of automatic lay-up technology for continuous fiber reinforced thermoplastic resin matrix composites[J]. Aeronautical Manufacturing Technology,2021,64(11):41-49(in Chinese).
|
[2] |
文立伟, 肖军, 王显峰, 等. 中国复合材料自动铺放技术研究进展[J]. 南京航空航天大学学报, 2015, 47(5):637-649. doi: 10.16356/j.1005-2615.2015.05.003
WEN Liwei, XIAO Jun, WANG Xianfeng, et al. Research progress of automatic lay-up technology for composite materials in China[J]. Journal of Nanjing University of Aeronautics and Astronautics,2015,47(5):637-649(in Chinese). doi: 10.16356/j.1005-2615.2015.05.003
|
[3] |
BAHO O, AUSIAS G, GROHENS Y, et al. Simulation of laser heating distribution for a thermoplastic composite: Effects of AFP head parameters[J]. International Journal of Advanced Manufacturing Technology,2020,110(7-8):2105-2117. doi: 10.1007/s00170-020-05876-9
|
[4] |
ZAAMI A, BARAN I, BOR T C, et al. New process optimization framework for laser assisted tape winding of composite pressure vessels: Controlling the unsteady bonding temperature[J]. Materials & Design,2020,196:109130.
|
[5] |
HOSSEINI S M A, SCHÄKEL M, BARAN I, et al. A new global kinematic-optical-thermal process model for laser-assisted tape winding with an application to helical-wound pressure vessel[J]. Materials & Design,2020,193:108854.
|
[6] |
REICHARDT J, BARAN I, AKKERMAN R. New analytical and numerical optical model for the laser assisted tape winding process[J]. Composites Part A: Applied Science and Manufacturing, 2018, 107: 647-656.
|
[7] |
CLANCY G, PEETERS D, OLIVERI V, et al. A study of the influence of processing parameters on steering of carbon fibre/PEEK tapes using laser-assisted tape placement[J]. Composites Part B: Engineering, 2019, 163: 243-251.
|
[8] |
OROMIEHIE E, GAIN A K, PRUSTY B G. Processing parameter optimisation for automated fibre placement (AFP) manufactured thermoplastic composites[J]. Composite Structures,2021,272:114223. doi: 10.1016/j.compstruct.2021.114223
|
[9] |
赵尧旭. 热塑性复合材料机器人铺放设备及工艺研究 [D]. 哈尔滨: 哈尔滨工业大学, 2019.
ZHAO Yaoxu. Research on robotic lay-up equipment and process of thermoplastic composites[D]. Harbin: Harbin Institute of Technology, 2019(in Chinese).
|
[10] |
WEN L W, SUN T F, NI J H, et al. Infrared heating technology for automated fiber placement[J]. Transactions of Nanjing University of Aeronautics and Astronautics,2015,32(6):631-638. doi: 10.16356/j.1005-1120.2015.06.631
|
[11] |
TANABE D, IMAMURA S, NISHIYABU K, et al. Effects of near-infrared heating and high frequency induction roller heating in continuous tape layup molding of CFRTP[J]. Transactions of the JSME (in Japanese),2016,82(843):16-00115. doi: 10.1299/transjsme.16-00115
|
[12] |
VENKATESAN C, VELU R, VAHEED N, et al. Effect of process parameters on polyamide-6 carbon fibre prepreg laminated by IR-assisted automated fibre placement[J]. The International Journal of Advanced Manufacturing Technology,2020,108(4):1275-1284. doi: 10.1007/s00170-020-05230-z
|
[13] |
DELL’ANNA R, LIONETTO F, MONTAGNA F, et al. Lay-up and consolidation of a composite pipe by in situ ultrasonic welding of a thermoplastic matrix composite tape[J]. Materials,2018,11(5):786. doi: 10.3390/ma11050786
|
[14] |
RIZZOLO R H, WALCZYK D F. Ultrasonic consolidation of thermoplastic composite prepreg for automated fiber placement[J]. Journal of Thermoplastic Composite Materials,2016,29(11):1480-1497. doi: 10.1177/0892705714565705
|
[15] |
WILLIAMS D, BROWN M. Xenon flashlamp heating for automated fibre placement[C]//Automated Composites Manufacturing-Third International Symposium. Montreal, Canada, 2017.
|
[16] |
宋清华, 肖军, 文立伟, 等. 热塑性复合材料自动纤维铺放装备技术[J]. 复合材料学报, 2016, 33(6):1214-1222.
SONG Qinghua, XIAO Jun, WEN Liwei, et al. Automatic fiber placement equipment technology for thermoplastic composites[J]. Acta Materiae Compositae Sinica,2016,33(6):1214-1222(in Chinese).
|
[17] |
陈吉平, 李岩, 刘卫平, 等. 连续纤维增强热塑性树脂基复合材料自动铺放原位成形技术的航空发展现状[J]. 复合材料学报, 2019, 36(4):784-794.
CHEN Jiping, LI Yan, LIU Weiping, et al. Current status of aerospace development of automatic lay-up in-situ molding technology for continuous fiber-reinforced thermoplastic resin matrix composites[J]. Acta Materiae Compositae Sinica,2019,36(4):784-794(in Chinese).
|
[18] |
ENGELHARDT R, IRMANPUTRA R, BRATH K, et al. Thermoset prepreg compaction during automated fiber placement and vacuum debulking[J]. Procedia CIRP,2019,85:153-158. doi: 10.1016/j.procir.2019.09.025
|
[19] |
WANG H, WANG W W, WANG H J, et al. Thermal management for thermoset automated fiber placement based on infrared heater structure arrangement[J]. Chinese Journal of Aeronautics, 2022, 1: 173-183.
|
[20] |
HÖRMANN P, STELZL D, LICHTINGER R, et al. On the numerical prediction of radiative heat transfer for thermoset automated fiber placement[J]. Composites Part A: Applied Science and Manufacturing,2014,67:282-288. doi: 10.1016/j.compositesa.2014.08.019
|
[21] |
BUIJS J, NEDERVEEN P J. A study of consolidation in filament winding with thermoplastic prepregs[J]. Journal of Thermoplastic Composite Materials,1992,5(4):276-286. doi: 10.1177/089270579200500401
|
[22] |
PITCHUMANI R, GILLESPIE JR J W, LAMONTIA M A. Design and optimization of a thermoplastic tow-placement process with in-situ consolidation[J]. Journal of Composite Materials,1997,31(3):244-275. doi: 10.1177/002199839703100302
|
[23] |
JANSSEN H, PETERS T, BRECHER C. Efficient production of tailored structural thermoplastic composite parts by combining tape placement and 3D printing[J]. Procedia CIRP,2017,66:91-95. doi: 10.1016/j.procir.2017.02.022
|
[24] |
宋清华. 热塑性复合材料自动铺放过程温度场分析及构件性能研究[D]. 南京: 南京航空航天大学, 2016.
SONG Qinghua. Temperature field analysis and component performance study of thermoplastic composites during automatic lay-up[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2016(in Chinese).
|
[25] |
宋清华, 刘卫平, 肖军, 等. 热塑性复合材料自动铺放过程中红外加热技术研究[J]. 材料工程, 2019, 47(1):77-83. doi: 10.11868/j.issn.1001-4381.2017.000346
SONG Qinghua, LIU Weiping, XIAO Jun, et al. Research on infrared heating technology in automatic lay-up process of thermoplastic composites[J]. Materials Engineering,2019,47(1):77-83(in Chinese). doi: 10.11868/j.issn.1001-4381.2017.000346
|
[26] |
郑兵. 编织碳纤维增强热塑性复合材料热压-注塑整体化成形关键技术[D]. 武汉: 华中科技大学, 2019.
ZHENG Bing. Key technologies for hot-pressing-injection molding of braided carbon fiber reinforced thermoplastic composites[D]. Wuhan: Huazhong University of Science and Technology, 2019(in Chinese).
|
[27] |
American Society for Testing and Materials. Standard test method for tensile properties of polymer matrix composites materials: ASTM D3039[S]. West Conshohocken: ASTM International, 2017.
|
[28] |
American Society for Testing and Materials. Standard test method for flexural properties of polymer matrix composites materials: ASTM D7264[S]. West Conshohocken: ASTM International, 2021.
|
[29] |
American Society for Testing and Materials. Standard test method for short-beam strength of polymer matrix composites materials and their laminates: ASTM D2344[S]. West Conshohocken: ASTM International, 2016.
|
[30] |
SAENZ-CASTILLO D, MARTÍN M I, CALVO S, et al. Effect of processing parameters and void content on mechanical properties and NDI of thermoplastic composites[J]. Composites Part A: Applied Science and Manufacturing,2019,121:308-320. doi: 10.1016/j.compositesa.2019.03.035
|
[31] |
American Society for Testing and Materials. American standard test methods for void content of reinforced plastics: ASTM D2374[S]. West Conshohocken: ASTM International, 2016.
|
[32] |
周健, 李茂东, 杨燕青, 等. 石墨烯/聚丙烯复合材料力学性能, 结晶行为与微观结构[J]. 江苏理工学院学报, 2019, 25(6):1-7. doi: 10.3969/j.issn.1674-8522.2019.06.001
ZHOU Jian, LI Maodong, YANG Yanqing, et al. Mechanical properties, crystallization behavior and microstructure of graphene/polypropylene composites[J]. Journal of Jiangsu Institute of Technology,2019,25(6):1-7(in Chinese). doi: 10.3969/j.issn.1674-8522.2019.06.001
|
[33] |
MIAO Q, DAI Z, MA G, et al. Effect of consolidation force on interlaminar shear strength of CF/PEEK laminates manufactured by laser-assisted forming[J]. Composite Structures,2021,266:113779. doi: 10.1016/j.compstruct.2021.113779
|
[34] |
刘鑫. 热塑性预浸带自动铺放制品缺陷探究及等温结晶工艺优化研究[D]. 北京: 北京化工大学, 2021.
LIU Xin. Exploration of defects in automatic lay-up products of thermoplastic prepreg tape and optimization of isothermal crystallization process[D]. Beijing: Beijing University of Chemical Technology, 2021(in Chinese).
|
[35] |
COMER A J, RAY D, OBANDE W O, et al. Mechanical characterisation of carbon fibre-PEEK manufactured by laser-assisted automated-tape-placement and autoclave[J]. Composites Part A: Applied Science and Manufacturing,2015,69:10-20. doi: 10.1016/j.compositesa.2014.10.003
|
[36] |
廉伟. 民用飞机复合材料结构孔隙率的影响及测量[C]//中国航空学会. 北京: 中国航空学会, 2014.
LIAN Wei. Influence and detection of porosity of civil aircraft composite structures[C]//Chinese Aeronautical Society. Beijing: Chinese Aeronautical Society, 2014(in Chinese).
|
[37] |
孙守政, 赵尧旭, 王扬, 等. 热塑性复合材料机器人铺放系统设计及工艺优化研究[J]. 机械工程学报, 2021, 57(23): 209-219.
SUN Shouzheng, ZHAO Yaoxu, WANG Yang, et al. Design and process optimization of robotic lay-up system for thermoplastic composites[J]. Journal of Mechanical Engineering, 2021, 57(23): 209-219(in Chinese).
|