Citation: | LONG Xikun, LI Shujian, CHEN Rong, et al. Numerical simulation of microwave curing of resin matrix composites workpiece[J]. Acta Materiae Compositae Sinica, 2023, 40(4): 2415-2426. doi: 10.13801/j.cnki.fhclxb.20220419.009 |
[1] |
HASSANA M R, GANJEHB B. Application of microwave heating in acrospace composite processing[J]. Applied Mechanics and Materials,2014,564:310-314. doi: 10.4028/www.scientific.net/AMM.564.310
|
[2] |
李树健, 湛利华, 白海明, 等. 基于树脂流动的变截面复合材料结构固化过程热-流-固多场强耦合数值仿真[J]. 复合材料学报, 2018, 35(8):2095-2102.
LI Shujian, ZHAN Lihua, BAI Haiming, et al. Numerical simulation of thermal fluid solid multi field coupling in curing process of variable cross-section composite structure based on resin flow[J]. Acta Materiae Compositae Sinica,2018,35(8):2095-2102(in Chinese).
|
[3] |
LI Y G, LI N Y, ZHOU J, et al. Microwave curing of multidirectional carbon fiber reinforced polymer composites[J]. Composite Structures,2019,212:83-93. doi: 10.1016/j.compstruct.2019.01.027
|
[4] |
ZHOU J, LI Y G, LI D, et al. Online learning based intelligent temperature control during polymer composites microwave curing process[J]. Chemical Engineering Journal,2019,370:455-465. doi: 10.1016/j.cej.2019.03.204
|
[5] |
李自强, 湛利华, 常腾飞, 等. 基于微波固化工艺的碳纤维T800/环氧树脂复合材料固化反应动力学[J]. 复合材料学报, 2018, 35(9):2458-2464.
LI Ziqiang, ZHAN Lihua, CHANG Tengfei, et al. Curing reaction kinetics of carbon fiber T800/epoxy resin composites based on microwave curing process[J]. Acta Materiae Compositae Sinica,2018,35(9):2458-2464(in Chinese).
|
[6] |
BOGETTI T A, GILLESPIE J W. Two-dimensional cure simulation of thick thermosetting composites[J]. Journal of Composite Materials,1991,25(3):239-273. doi: 10.1177/002199839102500302
|
[7] |
KIM Y K, WHITE S R. Viscoelastic analysis of processing-induced residual stresses in thick composite iaminates[J]. Mechanics of Composite Materials and Structures,2007,4(4):361-387.
|
[8] |
HOSSEINI T H, SADIGHI M, VOJDANI A. Effects of curing thermal residual stresses on fatigue crack propagation of aluminum plates repaired by FML patches[J]. Composite Structures,2013,100:154-162. doi: 10.1016/j.compstruct.2012.12.052
|
[9] |
VAUTARD F, OZCAN S, POLAND L, et al. Influence of thermal history on the mechanical properties of carbonfiber-acrylate composites cured by electron beam and thermal processes[J]. Composites Part A: Applied Science and Manufacturing,2012,45:162-172.
|
[10] |
ZHOU J, LI Y G, ZHU Z X, et al. Microwave heating and curing of metal-like CFRP laminates through ultrathin and flexible resonance structures[J]. Composites Science and Technology,2021,218:109-200.
|
[11] |
BHUDOLIA S K, GOHEL G, JOSHI S C, et al. Vibration damping and dynamic mechanical attributes of core-shell particles modified glass epoxy prepregs cured using microwave irradiations[J]. Composites Communications,2020,21:100412. doi: 10.1016/j.coco.2020.100412
|
[12] |
袁铁军, 周来水, 郑伟峰, 等. 微波固化成型三维中空复合材料结构的力学性能[J]. 玻璃钢/复合材料, 2017, 278(3):53-59.
YUAN Tiejun, ZHOU Laishui, ZHENG Weifeng, et al. Mechanical properties of three-dimensional hollow composite structures formed by microwave curing[J]. Composites Science and Engineering,2017,278(3):53-59(in Chinese).
|
[13] |
徐学宏, 王小群, 闫超, 等. 环氧树脂及其复合材料微波固化研究进展[J]. 材料工程, 2016, 44(8):111-120. doi: 10.11868/j.issn.1001-4381.2016.08.018
XU Xuehong, WANG Xiaoqun, YAN Chao, et al. Research progress of microwave curing of epoxy resin and its composites[J]. Journal of Materials Engineering,2016,44(8):111-120(in Chinese). doi: 10.11868/j.issn.1001-4381.2016.08.018
|
[14] |
LOOS A C, SPRINGERG S. Curing of epoxy matrix composites[J]. Journal of Composite Materials,1983,17(2):135-169. doi: 10.1177/002199838301700204
|
[15] |
BOEY F Y C, SONG X L, YUE C Y, et al. Modeling the curing kinetics for a modified bismaleimide resin[J]. Journal of Polymer Science,2000,38:907-913.
|
[16] |
朱攀星, 杨绍昌. X850树脂预浸料材料工艺性研究[J]. 科技展望, 2016, 26(24):70-72. doi: 10.3969/j.issn.1672-8289.2016.24.063
ZHU Panxing, YANG Shaochang. Study on the processability of X850 resin prepreg[J]. Science and Technology,2016,26(24):70-72(in Chinese). doi: 10.3969/j.issn.1672-8289.2016.24.063
|
[17] |
李伟东, 张金栋, 刘刚, 等. 国产T800碳纤维/双马来酰亚胺复合材料的界面及力学性能[J]. 复合材料学报, 2016, 33(7):1484-1491.
LI Weidong, ZHANG Jindong, LIU Gang, et al. Interface and mechanical properties of domestic T800 carbon fiber/bismaleimide composites[J]. Acta Materiae Compositae Sinica,2016,33(7):1484-1491(in Chinese).
|
[18] |
陈伟明, 王成忠, 周同悦, 等. T800碳纤维复合材料界面吸湿性能分析[J]. 玻璃钢/复合材料, 2006(5):20-23, 27.
CHEN Weiming, WANG Chengzhong, ZHOU Tongyue, et al. Analysis of interfacial hygroscopic properties of T800 carbon fiber composites[J]. Composites Science and Engineering,2006(5):20-23, 27(in Chinese).
|
[19] |
HAHN D W, OZISIK M N. Heat conduction[M]. 3rd Edition. New Jersey: John Wiley & Sons, Inc., 2012: 41-59.
|
[20] |
CREYSSELS M. Model for thermal convection with uniform volumetric energy sources[J]. Journal of Fluid Mechanics,2021,919:1-18.
|
[21] |
AHMED S E, RAIZAH Z A S. Analysis of the entropy due to radiative flow of nano-encapsulated phasechange materials within inclined porous prismatic enclosures finite element simulation[J]. Journal of Energy Storage,2021,40:102719. doi: 10.1016/j.est.2021.102719
|
[22] |
ZONGA L, KEMOELB L C, HAWLEYA M C. Dielectric studies of three epoxy resin systems during microwave cure[J]. Polymer,2005,46(8):2638-2645. doi: 10.1016/j.polymer.2005.01.083
|
[23] |
CHENG J, WANG B Y, XU D Z, et al. Resistive loss considerations in the finite element analysis of eddy current[J]. NDT and E International,2021,119:102403. doi: 10.1016/j.ndteint.2021.102403
|
[24] |
徐笑娟, 罗进, 陈兆权, 等. 考虑层间界面导电行为和电阻损耗的碳纤维增强树脂基复合材料结构电磁场扩散与衰减特性[J]. 复合材料学报, 2022, 39(10):5008-5019.
XU Xiaojuan, LUO Jin, CHEN Zhaoquan, et al. Electromagnetic field diffusion and attenuation characteristics of carbon fiber reinforced resin matrix composites considering interlayer interface conductive behavior and resistance loss[J]. Acta Materiae Compositae Sinica,2022,39(10):5008-5019(in Chinese).
|
[25] |
LINK G, RAMOPOULOS V. Simple analytical approach for industrial microwave applicator design[J]. Chemical Engineering and Processing: Process Intensification,2018,125:334-342.
|