Tensile properties and failure mechanism of three-dimensional angle interlocking woven layup composites under tensile loading

ZHU Chao; WU Ning; ZHANG Yifan; JIAO Yanan; CHEN Li; LIU Gang

doi:10.13801/j.cnki.fhclxb.20210914.001

Volume 39 Issue 7

Jul. 2022

Turn off MathJax

Article Contents

Article Navigation > Acta Materiae Compositae Sinica > 2022 > 39(7): 3167-3177

ZHU Chao, WU Ning, ZHANG Yifan, et al. Tensile properties and failure mechanism of three-dimensional angle interlocking woven layup composites under tensile loading[J]. Acta Materiae Compositae Sinica, 2022, 39(7): 3167-3177. doi: 10.13801/j.cnki.fhclxb.20210914.001

Citation:

ZHU Chao, WU Ning, ZHANG Yifan, et al. Tensile properties and failure mechanism of three-dimensional angle interlocking woven layup composites under tensile loading[J]. Acta Materiae Compositae Sinica, 2022, 39(7): 3167-3177. doi: 10.13801/j.cnki.fhclxb.20210914.001

Citation:

PDF( 4419 KB)

Tensile properties and failure mechanism of three-dimensional angle interlocking woven layup composites under tensile loading

doi: 10.13801/j.cnki.fhclxb.20210914.001

ZHU Chao^{1, 2},
WU Ning^{1, 2
,
,},
ZHANG Yifan^{1, 2},
JIAO Yanan^{1, 2},
CHEN Li^{1, 2},
LIU Gang³

1.
School of Textile Science and Engineering, Tiangong University, Tianjin 300387, China
2.
Key Laboratory of Advanced Textile Composite Materials, Ministry of Education, Tiangong University, Tianjin 300387, China
3.
State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, Center for Advanced Low-dimension Materials, Donghua University, Shanghai 201620, China

Received Date: 2021-07-01
Accepted Date: 2021-09-01
Rev Recd Date: 2021-08-23

Available Online: 2021-09-14

Publish Date: 2022-07-30

Abstract

Abstract

The resin transfer molding (RTM) process was used to prepare the three-dimensional angle interlocking woven layup composites. The influence of the layer thickness on the tensile properties and failure mechanism was emphatically discussed. The results show that the tensile strength increases significantly with the enhancement of the layer thickness. In the case of similar fiber volume content, the layer thickness has little effect on the tensile modulus. In the process of tensile fracture, the break of each layer is not synchronized, and the augment of layer thickness deepens the diversity in failure strain between the individual layers. The failure samples have significant delamination, no obvious cracks appeared in the layer. The warp yarns show obvious brittle fracture and a large amount of resin chips appears in the interlamination. The failure modes mainly include fiber fracture and extraction, interface debonding, matrix cracking and delamination.
- 3D woven,
- 2.5D,
- layer thickness,
- tensile property,
- failure mechanism
Long Abstrsct
Innovation Points

FullText(HTML)

References(26)

References

[1]	ZHANG Y, GUO Q, CHEN X, et al. Effect of apertures on tensile property of warp-reinforced 2.5D woven composites notched plates[J]. Composite Structures,2020,252:112693. doi: 10.1016/j.compstruct.2020.112693
[2]	DAI S, CUNNINGHAM P R, MARSHALL S, et al. Influence of fibre architecture on the tensile, compressive and flexu- ral behaviour of 3D woven composites[J]. Composites Part A: Applied Science and Manufacturing,2015,69:195-207. doi: 10.1016/j.compositesa.2014.11.012
[3]	郭瑞卿, 张一帆, 吕庆涛, 等. 多层多向层联三维机织复合材料的拉伸性能[J]. 复合材料学报, 2020, 37(10):2409-2417. GUO Ruiqing, ZHANG Yifan, LV Qingtao, et al. Tensile properties of multilayer multiaxial interlock 3D woven composites[J]. Acta Materiae Compositae Sinica,2020,37(10):2409-2417(in Chinese).
[4]	王雅娜, 曾安民, 陈新文, 等. 2.5D机织石英纤维增强树脂复合材料不同方向力学性能测试与模量预测[J]. 复合材料学报, 2019, 36(6):1364-1373. WANG Yana, ZENG Anmin, CHEN Xinwen, et al. Mechanical properties testing for 2.5D quartz fiber reinforced resin composites in different and module prediction[J]. Acta Materiae Compositae Sinica,2019,36(6):1364-1373(in Chinese).
[5]	GU H, ZHILI Z. Tensile behavior of 3D woven composites by using different fabric structures[J]. Materials & Design,2002,23(7):671-674.
[6]	关留祥, 李嘉禄, 焦亚男, 等. 航空发动机复合材料叶片用3D机织预制体研究进展[J]. 复合材料学报, 2018, 35(4):748-759. GUAN Liuxiang, LI Jialu, JIAO Yanan, et al. Review of 3D woven preforms for the composite blades of aero engine[J]. Acta Materiae Compositae Sinica,2018,35(4):748-759(in Chinese).
[7]	KUO W. The role of loops in 3D fabric composites[J]. Composites Science and Technology,2000,60(9):1835-1849. doi: 10.1016/S0266-3538(00)00075-0
[8]	ZHOU W, QIN R, HAN K, et al. Progressive damage visualization and tensile failure analysis of three-dimensional braided composites by acoustic emission and micro-CT[J]. Polymer Testing,2020,93:106881.
[9]	LEE L, RUDOV-CLARK S, MOURITZ A P, et al. Effect of weaving damage on the tensile properties of three-dimensional woven composites[J]. Composite Structures,2002,57(1):405-413.
[10]	JIN L, NIU Z, JIN B C, et al. Comparisons of static bending and fatigue damage between 3D angle-interlock and 3D orthogonal woven composites[J]. Journal of Reinforced Plastics & Composites,2012,31(14):935-945.
[11]	LAPEYRONNIE P, LE GROGNEC P, BINÉTRUY C, et al. Homogenization of the elastic behavior of a layer-to-layer angle-inter-lock composite[J]. Composite Structures,2011,93(11):2795-2807. doi: 10.1016/j.compstruct.2011.05.025
[12]	王忠远, 蔡长春, 王振军, 等. 三维角联锁机织铝基复合材料面内拉伸力学行为与失效机制[J]. 复合材料学报, 2021, 38(9):2989-2999. WANG Zhongyuan, CAI Changchun, WANG Zhenjun, et al. Mechanical behavior and failure mechanism of the 3D angle interlocking woven reinforced aluminum matrix composites under in-plane tensile loading[J]. Acta Materiae Compositae Sinica,2021,38(9):2989-2999(in Chinese).
[13]	吴宁, 韩美月, 焦亚男, 等. 高性能纤维的可织性研究进展[J]. 航空制造技术, 2020, 63(15):81-89. WU Ning, HAN Meiyue, JIAO Yanan, et al. Research progress on weavability of high-performance fibers[J]. Aeronautical Manufacturing Technology,2020,63(15):81-89(in Chinese).
[14]	MOHAMED M H, SALAMA M M. High speed three-dimensional weaving method and machine: United States Patent, US 6315007 B1[P]. 2001-06-23.
[15]	王盼乐, 周光明. 2.5D与2D织物混杂铺设复合材料力学性能实验研究[J]. 科技信息, 2011(22):463-465. doi: 10.3969/j.issn.1001-9960.2011.22.391 WANG Panle, ZHOU Guangming. Experimental study on mechanical properties of 2.5D and 2D hybrid fabric laid composites[J]. Science and Technology Information,2011(22):463-465(in Chinese). doi: 10.3969/j.issn.1001-9960.2011.22.391
[16]	SONG L L, LI J L, ZHAO Y F, et al. Improvement of interlaminar shear strength of 2.5D fabric laminated composites with short-cut web interlayer[J]. Journal of polymer engineering,2017,37(3):261-269. doi: 10.1515/polyeng-2016-0029
[17]	PANKOW M, JUSTUSSON B, RIOSBAAS M, et al. Effect of fiber architecture on tensile fracture of 3D woven textile composites[J]. Composite Structures,2019,225:111139. doi: 10.1016/j.compstruct.2019.111139
[18]	LOMOV S V, BOGDANOVICH A E, IVANOV D S, et al. A comparative study of tensile proper-ties of non-crimp 3D orthogonal weave and multi-layer plain weave E-glass composites:Part 1— Materials, methods and principal results[J]. Composites Part A: Applied Science and Manufacturing,2009,40(8):1134-1143. doi: 10.1016/j.compositesa.2009.03.012
[19]	杨彩云, 李嘉禄, 田玲玲. 复合材料中纱束的几何形态[J]. 复合材料学报, 2007, 24(4):123-127. doi: 10.3321/j.issn:1000-3851.2007.04.022 YANG Caiyun, LI Jialu, TIAN Lingling. Geometry configuration of yarn in composite materials[J]. Acta Materiae Compositae Sinica,2007,24(4):123-127(in Chinese). doi: 10.3321/j.issn:1000-3851.2007.04.022
[20]	陆慧中, 孙颖, 焦亚男, 等. 典型多向2.5D机织预制体近净形编织结构设计[J]. 复合材料学报, 2021, 38(9):3109-3117. LU Huizhong, SUN Ying, JIAO Yanan, et al. Near net-shaped design on the architecture of typical multidirectional 2.5D woven preform[J]. Acta Materiae Com-positae Sinica,2021,38(9):3109-3117(in Chinese).
[21]	杨连贺, 李姜. 三维机织复合材料纱线束截面变形研究[J]. 复合材料学报, 2008, 25(4):198-204. doi: 10.3321/j.issn:1000-3851.2008.04.035 YANG Lianhe, LI Jiang. Study on tow cross-section deformation in three-dimensional woven composites[J]. Acta Materiae Compositae Sinica,2008,25(4):198-204(in Chinese). doi: 10.3321/j.issn:1000-3851.2008.04.035
[22]	American Society for Testing Materials. Standard test method for tensile properties of polymer matrix composite materials: ASTM-D3039/D3090M—2007[S]. United States: American Society for Testing Materials International, 2007-12-15.
[23]	JIAO W, CHEN L, XIE J, et al. Effect of weaving structures on the geometry variations and mechanical properties of 3D LTL woven composites[J]. Composite Structures,2020,252:112756. doi: 10.1016/j.compstruct.2020.112756
[24]	刘俊岭, 孙颖, 陈利. 含变异结构的三维机织复合材料的轴向拉伸性能[J]. 纺织学报, 2019, 40(12):162-168. LIU Junling, SUN Ying, CHEN Li. Axial tensile properties of three-dimensional woven compo-sites with variant structure[J]. Journal of Textile Research,2019,40(12):162-168(in Chinese).
[25]	COX B N, DADKHAH M S, MORRIS W L. On the tensile failure of 3D woven composites[J]. Composites Part A: Applied Science and Manufacturing,1996,27(6):447-458. doi: 10.1016/1359-835X(95)00053-5
[26]	赵丽滨, 龚愉, 张建宇. 纤维增强复合材料层合板分层扩展行为研究进展[J]. 航空学报, 2019, 40(1):171-199. ZHAO Libin, GONG Yu, ZHANG Jianyu. A survey on delamination growth behavior in fiber reinforced composite laminates[J]. Acta Aeronautica et Astronautica Sinica,2019,40(1):171-199(in Chinese).