Design and fabrication of ceramic/fiber interlayer hybrid composites and test of projectile impact resistance

WANG Xiaohong; ZHANG Fengfa; LIU Changxi; WANG Yunlong; BI Fengyang; ZHANG Dongxing

doi:10.13801/j.cnki.fhclxb.20210513.008

Volume 38 Issue 8

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Acta Materiae Compositae Sinica > 2021 > 38(8): 2684-2693

WANG Xiaohong, ZHANG Fengfa, LIU Changxi, et al. Design and fabrication of ceramic/fiber interlayer hybrid composites and test of projectile impact resistance[J]. Acta Materiae Compositae Sinica, 2021, 38(8): 2684-2693. doi: 10.13801/j.cnki.fhclxb.20210513.008

Citation:

WANG Xiaohong, ZHANG Fengfa, LIU Changxi, et al. Design and fabrication of ceramic/fiber interlayer hybrid composites and test of projectile impact resistance[J]. Acta Materiae Compositae Sinica, 2021, 38(8): 2684-2693. doi: 10.13801/j.cnki.fhclxb.20210513.008

Citation:

PDF( 4644 KB)

Design and fabrication of ceramic/fiber interlayer hybrid composites and test of projectile impact resistance

doi: 10.13801/j.cnki.fhclxb.20210513.008

1.
Mechanical and Electronic Engineering Department, Heilongjiang Institute of Technology, Harbin 150030, China
2.
State Key Laboratory of Advanced Fiber Composite, Beijing 102101, China
3.
School of Astronautics, Harbin Institute of Technology, Harbin 150008, China

Received Date: 2021-04-06
Accepted Date: 2021-04-29

Available Online: 2021-05-14

Publish Date: 2021-08-15

Abstract

Abstract

As a comprehensive military fortifications for command, defense, observation, shooting in the battlefield, the porthole of the shelter often becomes the weak point and the protection performance determines the internal personnel security. This paper focused on designing and fabricating the fiber/ceramic interlayer hybrid composite material for protective small arms, and the bulletproof ability of the composites was tested. Firstly, a numerical model of the protective deck produced with fiber/ceramic interlayer hybrid composite was established based on ABAQUS/Explicit. The effects of the different ratio of the hybrid fiber and the homogenous fiber, and the laying angle of fiber on the impact resistance of the composite protective deck were studied. The results indicate that the composites show the best protection when the Kevlar-glass fiber mixed ratio is 0.3-0.7 and the fiber laying angle is 0°/30°/60°/90°/−60°/−30°/0°. Secondly, according to the simulation results, the high strength glass fiber S-2/TDE-85 epoxy composite laminates, SiC ceramics and Kevlar 49 fiber/TDE-85 epoxy composite laminates were stacked successively by combination of winding and hand lay-up techniques to fabricate the fiber/ceramic interlayer hybrid composite material protective deck specimens. Finally, the improved Hopkinson pressure bar device was applied to carry out the projectile impact tests on the protective deck. The results demonstrate that the designed protective deck can withstand the penetration of bullets with an average velocity of 500 m/s, which agrees with the theoretical calculation results.
- interlaminar hybrid composites,
- Kevlar fiber,
- glass fiber,
- impact,
- numerical simulation
Long Abstrsct
Innovation Points

FullText(HTML)

References(21)

References

[1]	李顺林. 复合材料大全[M]. 北京: 化学工业出版社, 2000. LI Shunlin. Composite materials[M]. Beijing: Chemical Industry Press, 2000(in Chinese).
[2]	刘伟伟, 张维, 崔淑玲. 高性能纤维的结构及其在防弹领域的应用[J]. 广西纺织科技, 2009, 38(3):25-27. LIU W W, ZHANG W, CUI S L. The structure of high performance fiber and its application in bulletproof field[J]. Guangxi Textile Technology,2009,38(3):25-27(in Chinese).
[3]	张振英, 戴芳. 复合材料在坦克装甲车辆上的应用[J]. 塑料, 2000, 29(3):37-42. ZHANG Z Y, DAI F. Application of composite materials in tank armored vehicles[J]. Plastics,2000,29(3):37-42(in Chinese).
[4]	FUKATSU K. Thermal degradation behaviour of aromatic polyamide fiber blended with cotton fiber[J]. Polymer Degradation and Stability,2002,75(3):479-484. doi: 10.1016/S0141-3910(01)00251-8
[5]	岳升彩. 新型纺织材料在军事上的应用—软质防弹衣[J]. 山东纺织经济, 2007(6):78-80. doi: 10.3969/j.issn.1673-0968.2007.06.030 YUE S C. The application of new textile material in military-soft bulletproof vest[J]. Shandong Textile Economy,2007(6):78-80(in Chinese). doi: 10.3969/j.issn.1673-0968.2007.06.030
[6]	石小富, 陈源. 轻质复合防弹材料在车辆上的应用[J]. 新技术新工艺, 2017(2):4-6. SHI X F, CHEN Y. Application of lightweight composite bulletproof materials in vehicles[J]. New Technology and New Process,2017(2):4-6(in Chinese).
[7]	缪备军. 轻型车辆车身防弹防爆设计研究[J]. 指挥信息系统与技术, 2010(5):66-68. doi: 10.3969/j.issn.1674-909X.2010.05.016 MIAO B J. Study on bulletproof and explosion-proof design of light vehicle body[J]. Command Information System and Technology,2010(5):66-68(in Chinese). doi: 10.3969/j.issn.1674-909X.2010.05.016
[8]	毛占稳, 李炜, 刘宇强. 复合材料在电动车辆电池包中的应用及分析[J]. 电源技术, 2016, 40(5):977-978. doi: 10.3969/j.issn.1002-087X.2016.05.011 MAO Z W, LI W, LIU Y Q. Application and analysis of composite materials in battery pack of electric vehicle[J]. Power Supply Technology,2016,40(5):977-978(in Chinese). doi: 10.3969/j.issn.1002-087X.2016.05.011
[9]	KAMMERER C. Plane behaviour at high strain rates of a quasi-unidit E-glass/polyester composite: Application to balistic impacts[J]. European Journal of Mechanics-A/Solids,1998,17(3):461-477. doi: 10.1016/S0997-7538(98)80055-7
[10]	李伟, 朱锡, 梅志远, 等. 能量平衡法在防弹性能估算中的应用研究[J]. 振动与冲击, 2009(11):191-194. LI W, ZHU X, MEI Z Y, et al. Application research of energy balance method in bulletproof performance estimation[J]. Journal of Vibration and Shock,2009(11):191-194(in Chinese).
[11]	LEN L M. Infiltrate and perforation of thick FRP laminates[J]. Composites and Technology,2001:1163-1172.
[12]	CZARNECKI G J. Estimation of the V50 using semi-empirical proceedures composite science and technology[J]. Composites Part B: Engineering,1998,29(4):321-329.
[13]	NANDLALL D , WILLIAMS K , VAZIRI R. Numerical simulation of the ballistic response of GRP plates[J]. Composites Science and Technology,1998,58(9):1463-1469.
[14]	BILLON H H, ROBINSON D J. Models for the ballistic lmpact of fabric armour[J]. International Journal of Impact Engineering,2001,25(4):411-414. doi: 10.1016/S0734-743X(00)00049-X
[15]	王云聪, 何煌, 曾首义. Kevlar纤维层合板抗弹性能的数值模拟[J]. 四川兵工学报, 2011, 32(3):17-20. WANG Y C, HE H, ZENG S Y. Numerical simulation of bullet-proof performance of Kevlar fiber laminates[J]. Journal of Sichuan Weapon and Engineering,2011,32(3):17-20(in Chinese).
[16]	SHI Y, SWAIT T, SOUTIS C. Modelling damage evolution in composite laminates subjected to low velocity impact[J]. Composite Structures,2012,94(9):2902-2913. doi: 10.1016/j.compstruct.2012.03.039
[17]	JOHNSON G R, HOLMQUIST T J. An improved computational constitutive model for brittle materials[C]//American Institute of Physics, 1994: 981-984.
[18]	SHARMA A, MISHRAR, JAIN S, et al. Deformation behavior of single and multi-layered materials under impact loading[J]. Thin-Walled Structures,2018,126:193-204. doi: 10.1016/j.tws.2017.08.021
[19]	赵渠森, 郭恩明. 先进复合材料手册[M]. 北京, 机械工业出版社, 2003. ZHAO Q S, GUO E M. Advanced composites handbook[M]. Beijing, China Machine Press, 2003(in Chinese).
[20]	ASTM. Standard test method for tensile properties of polymer matrix composite materials: ASTM D3039—74[S]. West Conshohocken: ASTM, 1974.
[21]	IMPACT B, ARMOR C, MODEL A. A new analytical model to simulate impact onto ceramic/composite armors[J]. International Journal of Impact Engineering,1998,21(6):461-471. doi: 10.1016/S0734-743X(98)00006-2