Design and wave absorbing properties of honeycomb with A-type skin

XING Mengda; MA Xiangyu; GONG Yuanxun; LV Tong; LI Ce; ZHAO Hongjie

doi:10.13801/j.cnki.fhclxb.20210414.003

Volume 39 Issue 3

Mar. 2021

Turn off MathJax

Article Contents

Article Navigation > Acta Materiae Compositae Sinica > 2022 > 39(3): 1180-1185

XING Mengda, MA Xiangyu, GONG Yuanxun, et al. Design and wave absorbing properties of honeycomb with A-type skin[J]. Acta Materiae Compositae Sinica, 2022, 39(3): 1180-1185. doi: 10.13801/j.cnki.fhclxb.20210414.003

Citation:

XING Mengda, MA Xiangyu, GONG Yuanxun, et al. Design and wave absorbing properties of honeycomb with A-type skin[J]. Acta Materiae Compositae Sinica, 2022, 39(3): 1180-1185. doi: 10.13801/j.cnki.fhclxb.20210414.003

Citation:

PDF( 3684 KB)

Design and wave absorbing properties of honeycomb with A-type skin

doi: 10.13801/j.cnki.fhclxb.20210414.003

Aerospace Institute of Advanced Material & Processing Technology, Beijing 100074, China

Received Date: 2021-03-19
Accepted Date: 2021-04-09
Rev Recd Date: 2021-04-01

Available Online: 2021-04-14

Publish Date: 2021-03-01

Abstract

Abstract

In order to solve the problem of wave absorption performance degradation in the 26.5-40 GHz frequency band caused by the introduction of skin material, the design of the skin structure was improved, the influence mecha-nism and law of A-type skin structure on the wave absorption performance of multi-layer honeycomb were studied, and the optimal structure parameters of A-type skin were obtained. The research results show that the A-type skin can improve the high frequency wave-transmitting property effectively. With the thickness of the honeycomb increasing, the reflectivity in the 2-18 GHz frequency band remains at the same level and the reflectivity in the 26.5-40 GHz frequency band increases at first and then decreases. The optimal thickness of the honeycomb is 2 mm. Based on five kinds of absorbing honeycomb sheets, the composite honeycomb was designed and prepared with the structure of quartz cloth (0.3 mm)/wave-transmitting honeycomb (2 mm)/quartz cloth (0.3 mm). The optimized absorbing honeycomb has excellent absorbing property in the wide frequency band of 2-18 GHz and 26.5-40 GHz, which is corresponding to the simulation result.
- absorbing honeycomb,
- A-type skin,
- broadband,
- reflectivity,
- impedance matching
Long Abstrsct
Innovation Points

FullText(HTML)

References(25)

References

[1]	邢丽英, 刘俊能. 电阻渐变型结构吸波材料的研究与发展[J]. 航空材料学报, 2000, 20(3):187-191. doi: 10.3969/j.issn.1005-5053.2000.03.034 XING Liying, LIU Junneng. Development of resistance gradual variation radar-absorbing composites[J]. Journal of Aeronautical Materials,2000,20(3):187-191(in Chinese). doi: 10.3969/j.issn.1005-5053.2000.03.034
[2]	鹿海军, 刘晓丽, 刘义, 等. 结构吸波泡沫及其夹层结构隐身材料的研究现状[J]. 材料工程, 2011(z1):9-14. doi: 10.3969/j.issn.1001-4381.2011.z1.002 LU Haijun, LIU Xiaoli, LIU Yi, et al. Development and progress in structural foam absorber and foamed stealth sandwich composites[J]. Journal of Materials Engineering,2011(z1):9-14(in Chinese). doi: 10.3969/j.issn.1001-4381.2011.z1.002
[3]	礼嵩明, 蒋诗才, 望咏林, 等. “超材料”结构吸波复合材料技术研究[J]. 材料工程, 2017, 45(11):10-14. doi: 10.11868/j.issn.1001-4381.2016.000152 LI Songming, JIANG Shicai, WANG Yonglin, et al. Study on “metamaterial” structural absorbing composite technology[J]. Journal of Materials Engineering,2017,45(11):10-14(in Chinese). doi: 10.11868/j.issn.1001-4381.2016.000152
[4]	胡爱军, 王志媛, 金诤, 等. 泡沫夹芯型吸波隐身结构复合材料的发展趋势[J]. 宇航材料工艺, 2009, 39(1):1-4. doi: 10.3969/j.issn.1007-2330.2009.01.002 HU Aijun, WANG Zhiyuan, JIN Zheng, et al. Advances in foam core sandwich structure composites with absorbing stealth materials[J]. Aerospace Materials & Technology,2009,39(1):1-4(in Chinese). doi: 10.3969/j.issn.1007-2330.2009.01.002
[5]	周远良, 赛义德, 张黎, 等. 树脂基Fe纳米粒子及碳纤维复合吸波平板的制备与性能[J]. 材料工程, 2018, 46(3):41-47. doi: 10.11868/j.issn.1001-4381.2016.000848 ZHOU Yuanliang, SAI Yide, ZHANG Li, et al. Preparation and performance of resin-based Fe nanoparticles/carbon fibers microwave absorbing composite plates[J]. Journal of Materials Engineering,2018,46(3):41-47(in Chinese). doi: 10.11868/j.issn.1001-4381.2016.000848
[6]	MEJEAN C, POMETCU L, BENZERGA R, et al. Electromagnetic absorber composite made of carbon fibers loaded epoxy foam for anechoic chamber application[J]. Materials Science and Engineering: B,2017,220:59-65. doi: 10.1016/j.mseb.2017.03.009
[7]	YUAN H, XIONG Y L, SHEN Q, et al. Synthesis and electromagnetic absorbing performances of CNTs/PMMA laminated nanocomposite foams in X-band[J]. Composites Part A: Applied Science and Manufacturing,2018,107:334-341. doi: 10.1016/j.compositesa.2018.01.024
[8]	DONG S, HU P, ZHANG X H, et al. Carbon foams modified with in-situ formation of Si₃N₄ and SiC for enhanced electromagnetic microwave absorption property and thermostability[J]. Ceramics International,2018,44(6):7141-7150. doi: 10.1016/j.ceramint.2018.01.156
[9]	LAUR V, BENZERGA R, LEBULLENGER R, et al. Green foams for microwave absorbing applications: Synthesis and characterization[J]. Materials Research Bulletin,2017,96:100-106. doi: 10.1016/j.materresbull.2017.01.052
[10]	马科峰, 张广成, 刘良威, 等. 夹层结构复合材料的吸波隐身技术研究进展[J]. 材料开发与应用, 2010, 25(6):53-57. doi: 10.3969/j.issn.1003-1545.2010.06.015 MA Kefeng, ZHANG Guangcheng, LIU Liangwei, et al. Research progress of technology for sandwich structural absorbing stealthy composite materials[J]. Development and Application of Materials,2010,25(6):53-57(in Chinese). doi: 10.3969/j.issn.1003-1545.2010.06.015
[11]	邢丽英, 刘俊能. 蜂窝夹层结构吸波材料浸渍胶液体系的研究[J]. 航空材料学报, 1993, 13(2):44-51. XING Liying, LIU Junneng. The study of honeycomb sandwich microwave absorbing materials dip coating system[J]. Journal of Aeronautical Materials,1993,13(2):44-51(in Chinese).
[12]	YAM L H, YAN Y J, JIANG J S. Vibration-based damage detection for composite structures using wavelet transform and neural network identification[J]. Composite Structures,2003,60(4):403-412. doi: 10.1016/S0263-8223(03)00023-0
[13]	程芳静, 孙耀, 王宜, 等. 纸基吸波材料的制备及其电磁性能探究[J]. 中国造纸, 2016, 35(5):39-45. CHENG Fangjing, SUN Yao, WANG Yi, et al. Study on preparation of paper-based absorbing material and its electromagnetic properties[J]. China Pulp & Paper,2016,35(5):39-45(in Chinese).
[14]	赵宏杰, 宫元勋, 邢孟达, 等. 结构吸波材料多层阻抗渐变设计及应用[J]. 宇航材料工艺, 2015, 45(4):19-22. doi: 10.3969/j.issn.1007-2330.2015.04.005 ZHAO Hongjie, GONG Yuanxun, XING Mengda, et al. Design and application of multilayer graded impedance in structural radar absorbing materials[J]. Aerospace Materials & Technology,2015,45(4):19-22(in Chinese). doi: 10.3969/j.issn.1007-2330.2015.04.005
[15]	克拉特E F. 雷达散射截面: 预估、测量和减缩[M]. 北京: 电子工业出版社, 1988: 244-247. KNOTT E F. Radar cross section: Prediction measurement and reduction[M]. Beijing: Publishing House of Electronics Industry, 1988: 244-247(in Chinese).
[16]	何燕飞, 龚荣洲, 王鲜, 等. 蜂窝结构吸波材料等效电磁参数和吸波特性研究[J]. 物理学报, 2008, 57(8):5261-5266. doi: 10.3321/j.issn:1000-3290.2008.08.094 HE Yanfei, GONG Rongzhou, WANG Xian, et al. Study on equivalent electromagnetic parameters and absorbing properties of honeycomb structured absorbing materials[J]. Acta Physica Sinica,2008,57(8):5261-5266(in Chinese). doi: 10.3321/j.issn:1000-3290.2008.08.094
[17]	礼嵩明, 吴思保, 院伟, 等. 宽频蜂窝夹层结构吸波复合材料设计方法研究[J]. 玻璃钢/复合材料, 2019(7):92-97. doi: 10.3969/j.issn.1003-0999.2019.07.016 LI Chongming, WU Sibao, YUAN Wei, et al. Study on design method of wide-band wave-absorbing honeycobm sandwich composites[J]. Fiber Reinforced Plastics/Composites,2019(7):92-97(in Chinese). doi: 10.3969/j.issn.1003-0999.2019.07.016
[18]	马向雨, 邢孟达, 张耀辉, 等. 无反射层泡沫夹层结构设计及吸波性能研究[J]. 材料工程, 2020, 48(2):94-99. doi: 10.11868/j.issn.1001-4381.2018.000980 MA Xiangyu, XING Mengda, ZHANG Yaohui, et al. Design and electromagnetic wave absorbing properties of foam sandwich structure without reflective layer[J]. Journal of Materials Engineering,2020,48(2):94-99(in Chinese). doi: 10.11868/j.issn.1001-4381.2018.000980
[19]	GAO Z P, LUO Q. Reflection characteristics of impregnated absorbent honeycomb under normal incidence of plane wave[J]. Journal of UEST of China,2003,32(4):389-394.
[20]	何山, 熊克敏. 雷达罩内用泡沫型吸波材料研究[J]. 航空材料学报, 2001, 21(3):19-23. doi: 10.3969/j.issn.1005-5053.2001.03.005 HE Shan, XIONG Kemin. Application of a foam RAM in the radome[J]. Journal of Aeronautical Materials,2001,21(3):19-23(in Chinese). doi: 10.3969/j.issn.1005-5053.2001.03.005
[21]	赵宏杰, 嵇培军, 胡本慧, 等. 蜂窝夹层复合材料的吸波性能[J]. 宇航材料工艺, 2010, 40(2):72-73. doi: 10.3969/j.issn.1007-2330.2010.05.018 ZHAO Hongjie, JI Peijun, HU Benhui, et al. Absorbing properties of honeycomb sandwich composites[J]. Aerospace Materials & Technology,2010,40(2):72-73(in Chinese). doi: 10.3969/j.issn.1007-2330.2010.05.018
[22]	中国人民解放军总装备部(标准制定单位). GJB 2038A—2011 雷达吸波材料反射率测试方法[S]. 北京: 总装备部军标出版发行部, 2011. General Reserve Department of PLA. GJB 2038A-2011 Measurement methods for reflectivity of radar absorbing material[S]. Beijing: Military Standard Publication Department, 2011(in Chinese).
[23]	胡传炘. 隐身涂层技术[M]. 北京: 化学工业出版社, 2004: 202-205. HU Chuanxin. Stealth coating technology[M]. Beijing: Chemical Industry Press, 2004: 202-205(in Chinese).
[24]	张家林, 林周进. 某Ka波段天线罩的设计[J]. 玻璃钢/复合材料, 2013(7):42-46. doi: 10.3969/j.issn.1003-0999.2013.06.023 ZHANG Jialin, LIN Zhoujin. Design of a Ka-band radome[J]. Fiber Reinforced Plastics/Composites,2013(7):42-46(in Chinese). doi: 10.3969/j.issn.1003-0999.2013.06.023
[25]	夏文干, 韩养军, 杨洁, 等. 高功率高透波材料的研究[J]. 高科技纤维与应用, 2003, 28(2):39-43. XIA Wengan, HAN Yangjun, YANG Jie, et al. Study on high power and high wave-transmissivity materials[J]. Hi-Tech Fiber & Application,2003,28(2):39-43(in Chinese).