Progressive damage and failure simulation of 2.5D woven composites

LV Qingquan; ZHAO Zhenqiang; LI Chao; ZHANG Chao

doi:10.13801/j.cnki.fhclxb.20201116.006

Volume 38 Issue 8

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Acta Materiae Compositae Sinica > 2021 > 38(8): 2747-2757

LV Qingquan, ZHAO Zhenqiang, LI Chao, et al. Progressive damage and failure simulation of 2.5D woven composites[J]. Acta Materiae Compositae Sinica, 2021, 38(8): 2747-2757. doi: 10.13801/j.cnki.fhclxb.20201116.006

Citation:

LV Qingquan, ZHAO Zhenqiang, LI Chao, et al. Progressive damage and failure simulation of 2.5D woven composites[J]. Acta Materiae Compositae Sinica, 2021, 38(8): 2747-2757. doi: 10.13801/j.cnki.fhclxb.20201116.006

Citation:

PDF( 4216 KB)

Progressive damage and failure simulation of 2.5D woven composites

doi: 10.13801/j.cnki.fhclxb.20201116.006

LV Qingquan^1
,,
ZHAO Zhenqiang^1
,,
LI Chao^2
,,
ZHANG Chao^{1
,
,}

1.
School of Areonautics, Northwestern Polytechnical University, Xi’an 710072, China
2.
Nanjing Fiberglass Research & Design Institute, Nanjing 211101, China

Received Date: 2020-09-03
Accepted Date: 2020-11-04

Available Online: 2020-11-17

Publish Date: 2021-08-15

Abstract

Abstract

Compression tests were carried out on the unit cell of a typical 2.5D woven composite to examine the compression performance. Meanwhile, a high fidelity meso-scale finite element model which was generated in term of the microscopic characterization of the woven architecture was adopted to investigate the internal deformation and progressive failure process of the unit cell. The results indicate that the 2.5D woven composite exhibits nonlinear mechanical response under both the warp and the weft compression, and the compression modulus and strength along warp direction are higher than those in weft direction; The dominate failure modes of warp compression contain transverse cracking of warp yarns, interface debonding between yarns, crushing of weft yarns and the pure matrix cracking; during the weft compression, the crushing and fracture of weft yarns as well as the pure matrix cracking are observed. Moreover, by comparing the experimental and simulation results, the proposed meso-scale model can well predict the stress-strain responses of the 2.5D woven composite under compression loads, as well as accurately simulate the damage initiation and evolution within the woven architecture.
- 2.5D woven composite,
- mechanical properties,
- compression test,
- numerical simulation,
- progressive damage analysis
Long Abstrsct
Innovation Points

FullText(HTML)

References(26)

References

[1]	张超, 许希武, 毛春见. 三维编织复合材料渐进损伤模拟及强度预测[J]. 复合材料学报, 2011, 28(2):222-230. ZHANG Chao, XU Xiwu, MAO Chunjian. Progressive damage simulation and strength prediction of 3D braided composites[J]. Acta Materiae Compositae Sinica,2011,28(2):222-230(in Chinese).
[2]	曾涛, 姜黎黎. 三维编织复合材料力学性能研究进展[J]. 哈尔滨理工大学学报, 2011, 16(1):34-41, 47. doi: 10.3969/j.issn.1007-2683.2011.01.008 ZEN Tao, JIANG Lili. Development of investigation into mechanical properties of 3D braided composites[J]. Journal of Harbin University of Science and Technology,2011,16(1):34-41, 47(in Chinese). doi: 10.3969/j.issn.1007-2683.2011.01.008
[3]	SONG J, WEN W, CUI H. Experimental and numerical investigation of mechanical behaviors of 2.5D woven composites at ambient and un-ambient temperatures[J]. Composite Structures,2018,201:699-720.
[4]	TENG X, SHI D, CHEN Z. Investigation on non-uniform strains of a 2.5D woven ceramic matrix composite under in-plane tensile stress[J]. Journal of the European Ceramic Society,2020,40:36-48. doi: 10.1016/j.jeurceramsoc.2019.08.030
[5]	YUAN S, CAO H, QIAN K. The study of low-velocity impact performance of 2.5D woven composites[J]. Fiber Reinforced Plastics/Composites,2014(1):8-12.
[6]	YOUNES R, ZAKI W. Optimal weaving for 2.5D interlocks[J]. Composite Structures,2011,93(4):1255-1264. doi: 10.1016/j.compstruct.2010.10.013
[7]	杨振宇, 俸翔, 苏洲, 等. 2.5D编织复合材料细观结构及弹性性能[J]. 宇航材料工艺, 2010, 40(2):67-71. doi: 10.3969/j.issn.1007-2330.2010.02.018 YANG Zhenyu, FENG Xiang, SU Zhou, et al. Meso-structure and elastic properties of 2.5D braided composites[J]. Aerospace Materials Technology,2010,40(2):67-71(in Chinese). doi: 10.3969/j.issn.1007-2330.2010.02.018
[8]	HALLAL A, YOUNES R, FARDUON F, et al. Improved analytical model to predict the effective elastic properties of 2.5D interlock woven fabrics composite[J]. Composite Structures,2012,94(10):3009-3028. doi: 10.1016/j.compstruct.2012.03.019
[9]	BYUN J, CHOU T. Elastic properties of three-dimensional angle-interlock fabric preforms[J]. Journal of the Textile Institute,1990,81(4):538-548. doi: 10.1080/00405009008658727
[10]	CHEN L, YAO X, CEN S. Predictions of elastic property on 2.5D C/SiC composites based on numerical modeling and semi-analytical method[J]. Composites Part B: Engineering,2015,74:53-65. doi: 10.1016/j.compositesb.2015.01.009
[11]	DONG W, XIAO J, LI Y. Finite element analysis of the tensile properties of 2.5D braided composites[J]. Materials Science & Engineering A,2007,457(1-2):199-204.
[12]	LIU G, ZHANG L, GUO L C, et al. Multi-scale progressive failure simulation of 3D woven composites under uniaxial tension[J]. Composite Structures,2019,208:233-243. doi: 10.1016/j.compstruct.2018.09.081
[13]	ZHANG D, CHEN L, WANG Y, et al. Stress field distribution of warp-reinforced 2.5D woven composites using an idealized meso-scale voxel-based model[J]. Journal of Material Science,2017,52(11):1-23.
[14]	LU H, GUO L, LIU G, et al. Progressive damage investigation of 2.5D woven composites under quasi-static tension[J]. Acta Mechanica,2019,230(4):1323-1336. doi: 10.1007/s00707-017-2024-z
[15]	卢子兴, 周原, 冯志海, 等. 2.5D机织复合材料压缩性能实验与数值模拟[J]. 复合材料学报, 2015, 32(1):150-159. LU Zixing, ZHOU Yuan, FENG Zhihai, et al. Experiment and numerical simulation on compressive properties of 2.5D woven fabric composites[J]. Acta Materiae Compositae Sinica,2015,32(1):150-159(in Chinese).
[16]	XING J. Mesomechanical simulation of rate-dependent mechanical behavior for triaxially braided composite[C]. Earth and Space, 2018: 645-654.
[17]	JIA Y, YAN W, LIU H. Carbon fiber pullout under the influence of residual thermal stress in polymer matrix compo-sites[J]. Computational Materials Science,2012,62:79-86. doi: 10.1016/j.commatsci.2012.05.019
[18]	全国纤维增强塑料标准化技术委员会. 纤维增强塑料压缩性能实验方法: GB/T 1448—2005[S]. 北京: 中国质检出版社, 2005. The Fiber Reinforced Plastic Standardization Technical Committee. Fiber-reinforced plastics composites-Determination of compressive properties: GB/T 1448—2005[S]. Beijing: China Zhijian Publishing House, 2005(in Chinese).
[19]	杨彩云, 刘铮, 万振凯, 等. 机织物复合材料纤维体积含量计算机图像测定[J]. 复合材料学报, 2005, 22(4):142-148. doi: 10.3321/j.issn:1000-3851.2005.04.025 YANG Caiyun, LIU Zhen, WAN Zhenkai, et al. Determination of fiber volume fractions in woven fabric composites laminates by image analysis[J]. Acta Materiae Compositae Sinica,2005,22(4):142-148(in Chinese). doi: 10.3321/j.issn:1000-3851.2005.04.025
[20]	GOLDBERG R, ROBERTS G, GILAT A. Incorporation of mean stress effects into the micromechanical analysis of the high strain rate response of polymer matrix compo-sites[J]. Composites Part B: Engineering,2003,34(2):151-165. doi: 10.1016/S1359-8368(02)00081-1
[21]	HUANG Z. Simulation of the mechanical properties of fibrous composites by the bridging micromechanics model[J]. Composites Part A: Applied Science and Manufacturing,2001,32(2):143-172. doi: 10.1016/S1359-835X(00)00142-1
[22]	黄争鸣. 桥联理论研究的最新进展[J]. 应用数学和力学, 2015, 36(6):563-581. doi: 10.3879/j.issn.1000-0887.2015.06.001 HUANG Zhengming. Latest advancements of the bridging model theory[J]. Applied Mathematics and Mechanics,2015,36(6):563-581(in Chinese). doi: 10.3879/j.issn.1000-0887.2015.06.001
[23]	HASHIN.Z. Failure criteria for unidirectional fiber compo-sites[J]. Journal of Applied Mechanics,1980,47(2):329-334. doi: 10.1115/1.3153664
[24]	HOU J P, PETRINIC N, RUIZ C, et al. Prediction of impact damage in composite plates[J]. Composites Science and Technology,2000,60(2):273-281. doi: 10.1016/S0266-3538(99)00126-8
[25]	ZHAO Z, LIU P, CHEN C, et al. Modeling the transverse tensile and compressive failure behavior of triaxially braided composites[J]. Composites Science and Technology,2019,172(1):96-107.
[26]	刘鹏, 郭亚洲, 赵振强, 等. 二维三轴编织复合材料压缩失效行为的细观有限元模拟[J]. 航空学报, 2019, 40(7):114-128. LIU Peng, GUO Yazhou, ZHAO Zhenqiang, et al. Meso-scale finite element simulation of compressive failure behavior of two-dimensional triaxially braided composite[J]. Acta Aeronautica et Astronautica Sinica,2019,40(7):114-128(in Chinese).