Effects of temperature and strain rate on hardening behavior of carbon fiber reinforced polyether ether ketone composite under shear load

YAO Chenxi; QI Zhenchao; CHEN Wenliang; ZHANG Chenqun

doi:10.13801/j.cnki.fhclxb.20201015.001

Volume 38 Issue 8

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Acta Materiae Compositae Sinica > 2021 > 38(8): 2578-2585

YAO Chenxi, QI Zhenchao, CHEN Wenliang, et al. Effects of temperature and strain rate on hardening behavior of carbon fiber reinforced polyether ether ketone composite under shear load[J]. Acta Materiae Compositae Sinica, 2021, 38(8): 2578-2585. doi: 10.13801/j.cnki.fhclxb.20201015.001

Citation:

YAO Chenxi, QI Zhenchao, CHEN Wenliang, et al. Effects of temperature and strain rate on hardening behavior of carbon fiber reinforced polyether ether ketone composite under shear load[J]. Acta Materiae Compositae Sinica, 2021, 38(8): 2578-2585. doi: 10.13801/j.cnki.fhclxb.20201015.001

Citation:

YAO Chenxi, QI Zhenchao, CHEN Wenliang, et al. Effects of temperature and strain rate on hardening behavior of carbon fiber reinforced polyether ether ketone composite under shear load[J]. Acta Materiae Compositae Sinica, 2021, 38(8): 2578-2585. doi: 10.13801/j.cnki.fhclxb.20201015.001

PDF( 3879 KB)

Effects of temperature and strain rate on hardening behavior of carbon fiber reinforced polyether ether ketone composite under shear load

doi: 10.13801/j.cnki.fhclxb.20201015.001

College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 211106, China

Received Date: 2020-08-13
Accepted Date: 2020-09-29

Available Online: 2020-10-15

Publish Date: 2021-08-15

Abstract

Abstract

Carbon fiber reinforced polyether ether ketone (CF/PEEK) is a high-performance thermoplastic composite with broad application in aerospace. PEEK has a non-linear behavior related to temperature and strain rate, which makes CF/PEEK have similar mechanical behavior in plane shear direction. In this paper, shear experiments were carried out on CF/PEEK specimens at different temperatures and strain rates. The stress-strain curve was divided into linear and non-linear parts. It is found that temperature and strain rate have a greater influence on the yield stress of CF/PEEK. With the increase of temperature from 20℃ to 130℃, the yield stress decreases by about 66%, and the rate of decrease is fast and then slow. With the increase of strain rate from 10⁻⁵s⁻¹ to 0.1 s⁻¹, the yield stress increases uniformly by about 35%. This phenomenon is fitted into an empirical formula of back stress, and the yield function of the classic elastoplastic constitutive model of thermoplastic composites is modified, which is applied in VUMAT to analysis the shear behavior of CF/PEEK. Compared with the experimental results, it is found that the yield point and the nonlinear stage are in good agreement. However, due to the poor infiltration of fibers and PEEK matrix, CF/PEEK composites have porosity defects inside, which affectes the initial elastic behavior of CF/PEEK composites and resultes in the deviation in the initial loading stage.
- CF/PEEK,
- non-linear behavior,
- strengthening behavior,
- temperature,
- strain rate
Long Abstrsct
Innovation Points

FullText(HTML)

References(27)

References

[1]	SOURAV C, JÜRGEN P, BEATE K. Influence of different carbon nanotubes on the electrical and mechanical properties of melt mixed poly (ether sulfone)-multi walled carbon nanotube composites[J]. Composites Science and Technology, 2012, 72(15): 2820-2828.
[2]	GENEVIEVE P, SHI H J, ARTHUR L. A study on amplitude transmission in ultrasonic welding of thermoplastic composites[J]. Composites Part A: Applied Science and Manufacturing, 2018, 113: 342-345.
[3]	IRENE FERNANDEZ V, PABLO V R. On avoiding thermal degradation during welding of high-performance thermoplastic composites to thermoset composites[J]. Compo-sites Part A: Applied Science and Manufacturing, 2015, 77: 175-180.
[4]	ZHANG Y B, SUN L Y. Effects of strain rate and high temperature environment on the mechanical performance of carbon fiber reinforced thermoplastic composites fabricated by hot press molding[J]. Composites Part A: Applied Science and Manufacturing,2020,134:105905.
[5]	LI Jianjun, LU Wenjun, CHEN Shaohua, et al. Revealing extra strengthening and strain hardening in heterogeneous two-phase nanostructures[J]. International Journal of Plasticity,2020,126:26-28.
[6]	GE Chao, YU Qingbo, QU Zhuojun. On dynamic response and fracture-induced initiation characteristics of aluminum particle filled PTFE reactive material using hat-shaped specimens[J]. Materials & Design,2020,188:107472.
[7]	杨王玥. 低碳钢多道次热变形中的应变强化相变与铁素体动态再结晶[J]. 金属学报, 2000(11):1192-1196. doi: 10.3321/j.issn:0412-1961.2000.11.017 YANG Wangyue. Strain-enhanced phase transition and ferrite dynamic recrystallization in multi-step thermal deformation of low carbon steel[J]. Acta Metalica Sinica,2000(11):1192-1196(in Chinese). doi: 10.3321/j.issn:0412-1961.2000.11.017
[8]	JEONG H T. Strain hardening behavior and strengthening mechanism in Mg-rich Al-Mg binary alloys subjected to aging treatment[J]. Materials Science & Engineering A,2020,794:139862.
[9]	TOSHIJI M, HIDETOSHI S. Strengthening Mg-Al-Zn alloy by repetitive oblique shear strain with caliber roll[J]. Scripta Materialia,2009,62(2):113-116.
[10]	ESMAEELI E, MANNING E, BARROS J A. Strain hardening fibre reinforced cement composites for the flexural strengthening of masonry elements of ancient structures[J]. Construction and Building Materials,2013,38(C):1010-1021.
[11]	欧华杰, 陈港, 朱朋辉. 纳米纤维素-碳纳米管/热塑性聚氨酯复合薄膜的制备及应变响应性能[J]. 复合材料学报, 2020, 37(11):2735-2742. OU Huajie, CHEN Gang, ZHU Penghui. Preparation and strain sensitive performance of cellulose nanofibercarbon nanotubes/thermoplastic polyurethane composite films[J]. Acta Materiae Compositae Sinica,2020,37(11):2735-2742(in Chinese).
[12]	TOUCHARD F, LAFARIE-FRENOT M C, GUÉDRA-DEGEORGES D. Mechanical behaviour characteristics of a thermoplastic composite used in structural components[J]. Composites Science and Technology,1996,56(7):785-791. doi: 10.1016/0266-3538(96)00021-8
[13]	LAGATTU F, LAFARIE-FRENOT M C. Variation of PEEK matrix crystallinity in APC-2 composite subjected to large shearing deformations[J]. Composites Science and Technology,2000,60(4):605-612. doi: 10.1016/S0266-3538(99)00169-4
[14]	VIEILLE B, AUCHER J, TALEB L. Influence of temperature on the behavior of carbon fiber fabrics reinforced PPS laminates[J]. Materials Science and Engineering: A,2009,517(1-2):51-60. doi: 10.1016/j.msea.2009.03.038
[15]	BARBA D, ARIAS A, GARCIA-GONZALEZ D. Temperature and strain rate dependences on hardening and softening behaviours in semi-crystalline polymers: Application to PEEK[J]. International Journal of Solids and Structures, 2020, 182-183: 206-210.
[16]	SUN C T. A simple flow rule for characterizing nonlinear behavior of fiber composites[J]. Journal of Composite Materials, 1989, 23(10): 1009-1020.
[17]	WANG Shiyu, ZHANG Jiazhen, FANG Guodong. Mathematical description of mechanical behavior of woven fabric reinforced PPS-based composites at high temperature[J]. Polymer Composites,2019,40(3):1097-1102. doi: 10.1002/pc.24807
[18]	ASTM. Stand test method for shear properties of compo-site materials by the V-notched beam method: ASTM D5379/D5379M-05[S]. West conshohocken: ASTM, 2012.
[19]	WEEKS C A, SUN C T. Modeling non-linear rate-dependent behavior in fiber-reinforced composites[J]. Compo-sites Science and Technology,1998,58(3):603-611.
[20]	HASSAN E, GE D, YANG L, et al. Highly boosting the interlaminar shear strength of CF/PEEK composites via introduction of PEKK onto activated CF[J]. Composites Part A: Applied Science and Manufacturing,2018,112:155-160. doi: 10.1016/j.compositesa.2018.05.029
[21]	YANG Zhengling. Strain rate dependent shear localization and deformation mechanisms in the CrMnFeCoNi high-entropy alloy with various microstructures[J]. Materials Science & Engineering A,2020,793:139854.
[22]	CHEN W H, HE W, CHEN Z, et al. Extraordinary room temperature tensile ductility of laminated Ti/Al composite: Roles of anisotropy and strain rate sensitivity[J]. International Journal of Plasticity,2020,133:102806.
[23]	PRAKASH G, SINGH N K , GUPTA N K. Deformation behaviours of Al2014-T6 at different strain rates and temperatures[J]. Structures,2020,26:193-203.
[24]	MA C, TAI N H, WU S H, et al. Creep behavior of carbon-fiber-reinforced polyetheretherketone (PEEK) [±45] 4 s laminated composites (I)[J]. Composites Part B: Engineering,1997,28(4):407-417.
[25]	ZOU Huiran, YIN Weilong, CAI Chaocan, et al. The out-of-plane compression behavior of cross-ply AS4/PEEK thermoplastic composite laminates at high strain rates[J]. Materials, 2018, 11(11): 2312.
[26]	ABBASNEZHAD N, KHAVANDI A, FITOUSSI J. Influence of loading conditions on the overall mechanical behavior of polyether-ether-ketone (PEEK)[J]. International Journal of Fatigue, 2018, 109: 83-92.
[27]	ALVAREDO Á, MARTÍN M, CASTELL P, et al. Non-isothermal crystallization behavior of PEEK/graphene nanoplatelets composites from melt and glass states[J]. Polymers,2019,11(1):124.