Citation: | JIANG Peng, WANG Zhongqi, CHANG Zhengping, et al. Interlaminar aligned carbon nanotubes spraying process and fracture toughness of CFRP[J]. Acta Materiae Compositae Sinica, 2021, 38(2): 496-505. doi: 10.13801/j.cnki.fhclxb.20200824.004 |
[1] |
杜善义. 先进复合材料与航空航天[J]. 复合材料学报, 2007, 24(1):1-12. doi: 10.3321/j.issn:1000-3851.2007.01.001
DU S Y. Advanced composite materials and aerospace engineering[J]. Acta Materiae Compositae Sinica,2007,24(1):1-12(in Chinese). doi: 10.3321/j.issn:1000-3851.2007.01.001
|
[2] |
张娜, 龙春光, 何宏燕, 等. 碳纳米纤维纸-玻纤/环氧复合材料对风力发电叶片的影响[J]. 复合材料学报, 2013, 30(1):90-95.
ZHANG N, LONG C G, HE H Y, et al. Effect of carbon nano-fiber paper-glass fiber/epoxy composite used for wind turbineblade[J]. Acta Materiae Compositae Sinica,2013,30(1):90-95(in Chinese).
|
[3] |
拓宏亮, 马晓平, 卢智先. 基于连续介质损伤力学的复合材料层合板低速冲击损伤模型[J]. 复合材料学报, 2018, 35(7):1878-1888.
TUO H L, MA X P, LU Z X. A model for low velocity impact damage analysis of composite laminates based on con-tinuum damage mechanics[J]. Acta Materiae Compositae Sinica,2018,35(7):1878-1888(in Chinese).
|
[4] |
KHAN S U, KIM J K. Impact and delamination failure of multiscale carbon nanotube-fiber reinforced polymer composites: A review[J]. International Journal of Aeronautical & Space Sciences,2011,12(2):115-133.
|
[5] |
STORCK S, MALECKI H, SHAH T, et al. Improvements in interlaminar strength: A carbon nano-tube approach[J]. Composites Part B: Engineering,2011,42(6):1508-1516. doi: 10.1016/j.compositesb.2011.04.039
|
[6] |
WARRIER A, GODARA A, ROCHEZ O, et al. The effect of adding carbon nanotubes to glass/epoxy composites in the fibre sizing and/or the matrix[J]. Composites Part A: Applied Science and Manufacturing,2010,41(4):532-538. doi: 10.1016/j.compositesa.2010.01.001
|
[7] |
FAN Z, SANTARE M H, ADVANI S G. Interlaminar shear strength of glass fiber reinforced epoxy composites enhanced with multi-walled carbon nanotubes[J]. Compo-sites Part A: Applied Science and Manufacturing (Incorporating Composites and Composites Manufacturing),2008,39(3):540-554. doi: 10.1016/j.compositesa.2007.11.013
|
[8] |
IIJIMA S. Helical microtubules of graphitic carbon[J]. Nature,1991,354(6348):56-58. doi: 10.1038/354056a0
|
[9] |
CHOU T W, GAO L, THOSTENSON E T, et al. An assessment of the science and technology of carbon nanotube-based fibers and composites[J]. Composites Science and Technology,2010,70(1):1-19. doi: 10.1016/j.compscitech.2009.10.004
|
[10] |
SAGER R J, KLEIN P J, LAGOUDAS D C, et al. Effect of carbon nanotubes on the interfacial shear strength of T650 carbon fiber in an epoxy matrix[J]. Composites Science and Technology,2009,69(7-8):898-904. doi: 10.1016/j.compscitech.2008.12.021
|
[11] |
LV P, FENG Y Y, ZHANG P, et al. Increasing the interfacial strength in carbon fiber/epoxy composites by controlling the orientation and length of carbon nanotubes grown on the fibers[J]. Carbon,2011,49(14):4665-4673. doi: 10.1016/j.carbon.2011.06.064
|
[12] |
AN F, LU C, GUO J, et al. Preparation of vertically aligned carbon nanotube arrays grown onto carbon fiber fabric and evaluating its wettability on effect of composite[J]. Applied Surface Science,2011,258(3):1069-1076. doi: 10.1016/j.apsusc.2011.09.003
|
[13] |
SEYHAN A T, TANOGLU M, SCHULTE K. Mode I and mode II fracture toughness of E-glass non-crimp fabric/carbon nanotube (CNT) modified polymer based composites[J]. Engineering Fracture Mechanics,2008,75(18):5151-5162. doi: 10.1016/j.engfracmech.2008.08.003
|
[14] |
SHAN F L, GU Y Z, LI M, et al. Effect of deposited carbon nanotubes on interlaminar properties of carbon fiber-reinforced epoxy composites using a developed spraying processing[J]. Polymer Composites,2013,34(1):41-50. doi: 10.1002/pc.22375
|
[15] |
WILLIAMS J, GRADDAGE N, RAHATEKAR S. Effects of plasma modified carbon nanotube interlaminar coating on crack propagation in glass epoxy composites[J]. Compo-sites Part A: Applied Science & Manufacturing,2013,54(54):173-181.
|
[16] |
赫玉欣, 杨松, 张丽, 等. 碳纳米管有序排列对碳纤维增强环氧树脂基复合材料低温性能的影响[J]. 复合材料学报, 2017, 34(8):1693-1703.
HE Y X, YANG S, ZHANG L, et al. Effects of aligned carbon nanotubes in matrix on mechanical properties of carbon fiber reinforced epoxy composites at cryogenic tempera-ture[J]. Acta Materiae Compositae Sinica,2017,34(8):1693-1703(in Chinese).
|
[17] |
RAVINDRAN A R, LADANI R B, WU S Y, et al. Multi-scale toughening of epoxy composites via electric field alignment of carbon nanofibres and short carbon fibres[J]. Composites Science and Technology,2018(167):115-125.
|
[18] |
周还潮, 马传国, 张晶晶. 弱磁场对EP/MWCNTs-Fe3O4复合材料结构与性能的影响[J]. 工程塑料应用, 2015, 43(10):7-12. doi: 10.3969/j.issn.1001-3539.2015.10.002
ZHOU H C, MA C G, ZHANG J J, et al. Effects of low magnetic field on structure and properties of epoxy/MWCNTS-Fe3O4 composites[J]. Engineering Plastics Application,2015,43(10):7-12(in Chinese). doi: 10.3969/j.issn.1001-3539.2015.10.002
|
[19] |
董怀斌, 李长青, 任攀, 等. 碳纳米管定向排列增强碳纤维/环氧树脂复合材料制备及力学性能[J]. 玻璃钢/复合材料, 2017(7):22-28.
DONG H B, LI C Q, REN P, et al. Preparation and mechanical properties of carbon nanotube aligned carbon fiber/epoxy composites[J]. Fiber Reinforced Plastics/Compo-sites,2017(7):22-28(in Chinese).
|
[20] |
陈伟, 郑亚萍. Fe3O4-MWCNTs在环氧树脂中的定向排列[J]. 复合材料学报, 2013, 30(6):54-59. doi: 10.3969/j.issn.1000-3851.2013.06.008
CHEN W, ZHENG Y P. Alignment of Fe3O4-MWCNTs in epoxy resin[J]. Acta Materiae Compositae Sinica,2013,30(6):54-59(in Chinese). doi: 10.3969/j.issn.1000-3851.2013.06.008
|
[21] |
MA C G, LIU H Y, DU X S, et al. Fracture resistance, thermal and electrical properties of epoxy composites containing aligned carbon nanotubes by low magnetic field[J]. Composites Science and Technology,2015(114):126-135.
|
[22] |
THAKRE P R, LAGOUDAS D C, RIDDICK J C, et al. Investigation of the effect of single wall carbon nanotubes on interlaminar fracture toughness of woven carbon fiber-epoxy composites[J]. Journal of Composite Materials,2011,45(10):1091-1107. doi: 10.1177/0021998310389088
|
[23] |
中国航空工业总公司, 碳纤维复合材料层合板I型层间断裂韧性GIC试验方法: HB 7402—1996[S]. 北京: 中国航空工业总公司, 1996.
Aviation Industry Corporation of China. Test method for mode I interlaminar fracture toughness GIC of CFRP laminates: HB 7402—1996[S]. Beijing: Aviation Industry Corporation of China, 1996(in Chinese).
|
[24] |
CUNHA C, PANSERI S, IANNAZZO D, et al. Hybrid composites made of multiwalled carbon nanotubes functionalized with Fe3O4 nanoparticles for tissue engineering applications[J]. Nanotechnology,2012,23(46):465102. doi: 10.1088/0957-4484/23/46/465102
|
[25] |
RAVINDRAN A R, LADANI R B, WU S, et al. Multi-scale toughening of epoxy composites via electric field alignment oi carbon nanofibres and short carbon fibres[J]. Composites Science and Technology,2018,167(OCT. 20):115-125.
|
[26] |
ISLAM M F, ROJAS E, BERGEY D M, et al. High weight fraction surfactant solubilization of single-wall carbon nanotubes in water[J]. Nano Letters,2003,3(2):269-273. doi: 10.1021/nl025924u
|
[27] |
SIDDIQUI N A, KHAN S U, KIM J K. Experimental torsional shear properties of carbon fiber reinforced epoxy compo-sites containing carbon nanotubes[J]. Composite Structures,2013,104(5):230-238.
|
[28] |
ELISA B, ESLAM S, USAMA K, et al. Interlaminar fracture toughness of CFRP laminates incorporating multi-walled carbon nanotubes[J]. Polymers,2015,7(6):1020-1045. doi: 10.3390/polym7061020
|
[29] |
KHAN S U, POTHNIS J R, KIM J K. Effects of carbon nanotube alignment on electrical and mechanical properties of epoxy nanocomposites[J]. Composites Part A: Applied science and Manufacturing,2013,49:26-34. doi: 10.1016/j.compositesa.2013.01.015
|
[30] |
WU S Y, LADANI R B, ZHANG J, et al. Epoxy nanocompo-sites containing magnetite-carbon nanofibers aligned using a weak magnetic field[J]. Polymer,2015,68:25-34. doi: 10.1016/j.polymer.2015.04.080
|