Construction and enhanced thermal properties of hollow glass beads/ aromatic thermosetting polyester composite foam

HAN Jianqiu; XU Xiaoyan; XIAO Yongbo; SHEN Yan; SHI Yu’nan; DAI Ji; QIU Jun

doi:10.13801/j.cnki.fhclxb.20200720.001

Volume 38 Issue 1

Jan. 2021

Turn off MathJax

Article Contents

Article Navigation > Acta Materiae Compositae Sinica > 2021 > 38(1): 93-101

HAN Jianqiu, XU Xiaoyan, XIAO Yongbo, et al. Construction and enhanced thermal properties of hollow glass beads/ aromatic thermosetting polyester composite foam[J]. Acta Materiae Compositae Sinica, 2021, 38(1): 93-101. doi: 10.13801/j.cnki.fhclxb.20200720.001

Citation:

HAN Jianqiu, XU Xiaoyan, XIAO Yongbo, et al. Construction and enhanced thermal properties of hollow glass beads/ aromatic thermosetting polyester composite foam[J]. Acta Materiae Compositae Sinica, 2021, 38(1): 93-101. doi: 10.13801/j.cnki.fhclxb.20200720.001

Citation:

PDF( 1559 KB)

Construction and enhanced thermal properties of hollow glass beads/ aromatic thermosetting polyester composite foam

doi: 10.13801/j.cnki.fhclxb.20200720.001

HAN Jianqiu^1
,,
XU Xiaoyan^1
,,
XIAO Yongbo^1
,,
SHEN Yan^2
,,
SHI Yu’nan^3
,,
DAI Ji^3
,,
QIU Jun^{3, 4
,
,}

1.
Powerchina Roadbridge Group Co. Ltd, Beijing 100120, China
2.
Jiangsu Hongyuan Technology Engineering Co. Ltd, Changzhou 213100, China
3.
School of Materials Science and Engineering, Tongji University, Shanghai 201804, China
4.
Key Laboratory of Advanced Civil Engineering Materials of Ministry of Education, Tongji University, Shanghai 201804, China

Received Date: 2020-03-26
Accepted Date: 2020-07-16

Available Online: 2020-07-20

Publish Date: 2021-01-15

Abstract

Abstract

In this study, hollow glass beads (HGB) were introduced into an aromatic thermosetting polyester (ATPE) based foam to prepare HGB/ATPE composite foam, and effect of content of HGB and foaming conditions on the properties of HGB/ATPE composite foam were investigated. After modification, the specific strength of the HGB/ATPE composite foam can reach 26.2 MPa/(g·cm⁻³), respectively. Moreover, the addition of HGB also greatly improves thermal properties and flame resistance performance of the HGB/ATPE composite foam. The thermal decomposition temperature, glass transition temperature and heat distortion temperature of the HGB/ATPE composite foam are 494.18℃, 230.47℃ and 191.00℃, respectively, and the limiting oxygen index can reach 35%–37%.
- hollow glass beads,
- wholly aromatic co-polyester,
- free foaming in situ,
- flame resistance,
- thermal property
Long Abstrsct
Innovation Points

FullText(HTML)

References(27)

References

[1]	李彬. 碳纳米聚氨酯泡沫吸能特性研究及其应用[D]. 长春: 吉林大学, 2017. LI Bin. Study on energy absorption characteristics of carbon nano polyurethane foam and application in autobody[D]. Changchun: Jiling University, 2017(in Chinese).
[2]	王富鑫. 酚醛泡沫塑料应用及制备[J]. 热固性树脂, 2002, 17(4):36-38. doi: 10.3969/j.issn.1002-7432.2002.04.011 WANG Fuxin. Manufacture and application of foamed phenolic resin[J]. Thermosetting Resin,2002,17(4):36-38(in Chinese). doi: 10.3969/j.issn.1002-7432.2002.04.011
[3]	LIU Z, ZHAN J, FARD M, et al. Acoustic properties of a porous polycarbonate material produced by additive manufacturing[J]. Materials Letters,2016,181:296-299. doi: 10.1016/j.matlet.2016.06.045
[4]	马明明. 聚酰亚胺泡沫塑料的制备与性能表征[D]. 青岛: 青岛科技大学, 2011. MA Mingming. The synthesis and properties characterization of polyimide foams[D]. Qingdao: Qingdao University of Science & Technology, 2011 (in Chinese).
[5]	TANG H Y, CHEN L. Preparation and characterization of polymethacrylimide foam[J]. Advanced Materials Research,2010,160-162:1309-1313. doi: 10.4028/www.scientific.net/AMR.160-162.1309
[6]	FRICH D, GORANOV K, SCHNEGGENBURGER L, et al. Novel high-temperature aromatic copolyester thermosets: Synthesis, characterization, and physical properties[J]. Macromolecules,1996,29(24):7734-7739.
[7]	HUANG Y Q, MCCORMICK J J, ECONOMY J. Adhesion of an aromatic thermosetting copolyester with copper foils[J]. Polymers for Advanced Technologies,2005,16(1):1-5.
[8]	WANG W Q, MEYER J, ZENG Q X, et al. Adhesion characteristics of aromatic thermosetting copolyester and glass fiber laminates with copper foils for improved circuit boards[J]. Polymers for Advanced Technologies,2016,27(12):1577-1585.
[9]	ZHANG J, DEMAS N G, POLYCARPOU A A, et al. A new family of low wear, low coefficient of friction polymer blend based on polytetrafluoroethylene and an aromatic thermosetting polyester[J]. Polymers for Advanced Technologies,2008,19(8):1105-1112. doi: 10.1002/pat.1086
[10]	ZHANG J, POLYCARPOU A A, ECONOMY J. An improved tribological polymer-coating system for metal surfaces[J]. Tribology Letters,2010,38(3):355-365. doi: 10.1007/s11249-010-9615-3
[11]	胡培. 飞机夹层结构的设计和泡沫芯材的选择[J]. 航空制造技术, 2010(17):94-96. doi: 10.3969/j.issn.1671-833X.2010.17.022 HU Pei. Design of sandwich structure and selection of foam core material for aircraft[J]. Aeronautical Manufacturing Technology,2010(17):94-96(in Chinese). doi: 10.3969/j.issn.1671-833X.2010.17.022
[12]	陈一民, 何斌. PMI高性能泡沫夹层材料的应用及国内研制现状[C]//第十六届全国复合材料学术年会. 长沙: 中国航空学会, 2010: 360-363. CHEN Yimin, HE Bin. The research and application of PMI foam in china[C]//16th National Conference on Composite Materials. Changsha: Chinese Society of Aeronautics and Astronautics, 2010: 360-363 (in Chinese).
[13]	HARTE A M, MCNAMARA J F, RODDY I D. A multilevel approach to the optimization of a composite light rail vehicle bodyshell[J]. Composite Structures,2004,63(3-4):447-453.
[14]	CHU H. Application of polyimide foam materials in aerospace vehicles[J]. Aerospace Materials & Technology,2006,36(3):1-3.
[15]	吕方, 朱光明, 胡巧青, 等. 玻璃微珠填充改性聚合物研究进展[J]. 玻璃钢/复合材料, 2008(3):53-56. LV Fang, ZHU Guangming, HU Qiaoqing, et al. Advances of glass bead filled polymer composites[J]. Fiber Reinforced Plastics/Composites,2008(3):53-56(in Chinese).
[16]	窦艳鹏, 孙淑芹, 吴湘锋. 高性能空心玻璃微珠的制备及其表面改性进展[J]. 中国粉体工程, 2012(1):7-13. DOU Yanpeng, SUN Shuqin, WU Xiangfeng. Progress in preparation and surface treatment of hollow glass beads with high performance[J]. China Powder Industry,2012(1):7-13(in Chinese).
[17]	杨庆泉. 环氧树脂/氰酸酯树脂固化反应机理及环氧树脂/玻璃布/玻璃微珠体系力学性能研究[D]. 北京: 北京化工大学, 2003. YANG Qingquan. A study on mechanism of the co-reaction of epoxy and cyanate and the mechanical properties of epoxy/glass cloth/hollow glass-bead blend[D]. Beijing: Beijing University of Chemical Technology, 2003(in Chinese).
[18]	周秋明, 王建华, 田春蓉, 等. 空心玻璃微珠复合聚氨酯泡沫的模塑成型收缩率[J]. 塑料工业, 2002, 30(5):23-24. doi: 10.3321/j.issn:1005-5770.2002.05.009 ZHOU Qiuming, WANG Jianhua, TIAN Chunrong, et al. Analysis of mechanical properties of UHMWPE composite filled with different filler[J]. China Plastics Industry,2002,30(5):23-24(in Chinese). doi: 10.3321/j.issn:1005-5770.2002.05.009
[19]	孙佳慧. 球壳结构轻质树脂基复合材料的制备及性能研究[D]. 哈尔滨: 哈尔滨工程大学, 2016. SUN Jiahui. Study on the preparation and properties of spherical shell structure lightweight resin-based composite materials[D]. Harbin: Harbin Engineering University, 2016(in Chinese).
[20]	中国国家标准化管理委员会. 硬质泡沫塑料压缩性能的测定: GB/T 8813—2008[S]. 北京: 中国标准出版社, 2008. Standardization Administration of of the People’s Republic of China. Rigid cellular plastics: Determination of compression properties: GB/T 8813—2008[S]. Beijing: China Standards Press, 2008(in Chinese).
[21]	中国国家标准化管理委员会. 塑料负荷变形温度的测定第2部分: 塑料、硬橡胶和长纤维增强复合材料: GB/T 1634.2—2004[S]. 北京: 中国标准出版社, 2004. Standardization Administration of of the People’s Republic of China. Plastics: Determination of temperature of deflection under load Part 2: Plastics, ebonite and long-fiber-reinforced composites: GB/T 1634.2—2004[S]. Beijing: China Standards Press, 2004(in Chinese).
[22]	中国国家标准化管理委员会. 塑料用氧指数法测定燃烧行为第2部分: 室温实验: GB/T 2406.2—2009[S]. 北京: 中国标准出版社, 2010. Standardization Administration of of the People’s Republic of China. Plastics: Determination of burning behavior by oxygen index Part 2: Ambient-temperature test: GB/T 2406.2—2009[S]. Beijing: China Standards Press, 2010(in Chinese).
[23]	中国国家标准化管理委员会. 硬质泡沫塑料燃烧性能试验方法: 垂直燃烧法: GB/T 8333—2008[S]. 北京: 中国标准出版社, 2008. Standardization Administration of of the People’s Republic of China. Test method for flammability of rigid cellular plastic: Vertical burning method: GB/T 8333—2008[S]. Beijing: China Standards Press, 2008(in Chinese).
[24]	GUO M X. Design of aromatic thermosetting polyester composites for thermally stable devices[D]. Illinois: University of Illinois at Urbana-Champaign, 2014.
[25]	马立, 刘芃, 胡培. PMI泡沫材料在航天器结构中应用的可行性研究[J]. 航天器环境工程, 2010, 27(2):164-168. doi: 10.3969/j.issn.1673-1379.2010.02.008 MA Li, LIU Peng, HU Pei. Feasibility study of application of PMI foam in spacecraft structure[J]. Spacecraft Environment Engineering,2010,27(2):164-168(in Chinese). doi: 10.3969/j.issn.1673-1379.2010.02.008
[26]	张翠, 张广成, 陈挺, 等. AN/MAA/AM三元共聚物的合成及性能研究[J]. 热固性树脂, 2006, 21(4):9-13. doi: 10.3969/j.issn.1002-7432.2006.04.003 ZHANG Cui, ZHANG Guangcheng, CHEN Ting, et al. Synthesis and properties of AN/MAA/AM terpolymer[J]. Thermosetting Resin,2006,21(4):9-13(in Chinese). doi: 10.3969/j.issn.1002-7432.2006.04.003
[27]	廖前程. 硬质交联聚氯乙烯发泡板材研究制备[D]. 北京: 北京化工大学, 2010. LIAO Qiancheng. The preparation of rigid cross-linked foamed polyvinyl chloride sheet[D]. Beijing: Beijing University of Chemical Technology, 2010(in Chinese).