Effect of graphene coating on heat transfer of anti-/deicing component for helicopter rotor

CHEN Long; LIU Hui; ZHANG Yishu

doi:10.13801/j.cnki.fhclxb.20200513.001

Volume 38 Issue 1

Jan. 2021

Turn off MathJax

Article Contents

Article Navigation > Acta Materiae Compositae Sinica > 2021 > 38(1): 239-245

CHEN Long, LIU Hui, ZHANG Yishu. Effect of graphene coating on heat transfer of anti-/deicing component for helicopter rotor[J]. Acta Materiae Compositae Sinica, 2021, 38(1): 239-245. doi: 10.13801/j.cnki.fhclxb.20200513.001

Citation:

CHEN Long, LIU Hui, ZHANG Yishu. Effect of graphene coating on heat transfer of anti-/deicing component for helicopter rotor[J]. Acta Materiae Compositae Sinica, 2021, 38(1): 239-245. doi: 10.13801/j.cnki.fhclxb.20200513.001

Citation:

PDF( 1671 KB)

Effect of graphene coating on heat transfer of anti-/deicing component for helicopter rotor

doi: 10.13801/j.cnki.fhclxb.20200513.001

Key Laboratory of High Efficiency and Clean Mechanical Manufacture, School of Mechanical Engineering, Shandong University, Jinan 250061, China

Received Date: 2020-03-16
Accepted Date: 2020-05-01

Available Online: 2020-05-14

Publish Date: 2021-01-15

Abstract

Abstract

The temperature measurements and anti-/deicing experiments of the composite anti-/deicing component were performed with water-based and oil-based graphene coating. In view of the sensitivity of helicopter rotor to icing, a method of modifying the heat transfer performance of rotor anti-/deicing component with graphene coating on the iron surface was proposed to improve the efficiency of anti-/deicing component. In order to verify the effect of graphene coating on the heat transfer efficiency, the temperature measurements and deicing experiments of the coated rotor anti-/deicing components were carried out on the deicing experimental platform. The experimental results show that the graphene coating has a significant effect on improving the heat transfer performance of anti-/deicing component. Meanwhile, the heat transfer of oil-based graphene coating and water-based graphene coating were tested respectively. The results show that the temperature rise rate of oil-based graphene coating is higher than that of water-based graphene coating, and the average heat transfer rate of oil-based graphene coating is 0.021℃/s, the instantaneous maximum heat transfer rate is 0.083℃/s, which are higher than that of water-based graphene coating. The results indicate that the anti-/deicing effect of oil-based graphene coating is better than that of water-based graphene coating. Finally, by changing the spraying process to control the thickness of graphene coating, it is found that with the increasing of the thickness of graphene coating, the thermal conductivity of the coating gradually decreases. The experimental results verify the inverse proportion relationship between the thermal conductivity of graphene coating and the thickness of the sheet in the thermal conductivity formula deduced by Balandin et al.
- graphene coating,
- heat transfer,
- anti-/deicing,
- spray coat,
- composites
Long Abstrsct
Innovation Points

FullText(HTML)

References(27)

References

[1]	PISCITELLI F, CHIARIELLO A, DABKOWSKI D, et al. Superhydrophobic coatings as anti-icing systems for small aircraft[J]. Aerospace,2020,7(1):2. doi: 10.3390/aerospace7010002
[2]	DEKONINCK L H, AHMADI S F, BOREYKO J B. Passive anti-frosting cables[J]. International Journal of Heat and Mass Transfer,2020,146:118808. doi: 10.1016/j.ijheatmasstransfer.2019.118808
[3]	QI Y, YANG Z, CHEN T, et al. Fabrication of superhydrophobic surface with desirable anti-icing performance based on micro/nano-structures and organosilane groups[J]. Applied Surface Science,2020,501:144165. doi: 10.1016/j.apsusc.2019.144165
[4]	杨常卫, 胡和平, 马艳玲, 等. 直升机旋翼桨叶防/除冰技术新思路[J]. 直升机技术, 2009(3):47-51. doi: 10.3969/j.issn.1673-1220.2009.03.009 YANG C W, HU H P, MA Y L, et al. A new idea on anti-icing and de-icing of helicopter rotor blade[J]. Helicopter Technique,2009(3):47-51(in Chinese). doi: 10.3969/j.issn.1673-1220.2009.03.009
[5]	曹普孙, 张威, 胡偶. 基于CCAR-29附录C的旋翼结冰特性研究[J]. 直升机技术, 2019(3):1-4, 9. doi: 10.3969/j.issn.1673-1220.2019.03.001 CAO P S, ZHANG W, HU O. Research for rotor icing property based on CCAR-29 appendix C[J]. Helicopter Technology,2019(3):1-4, 9(in Chinese). doi: 10.3969/j.issn.1673-1220.2019.03.001
[6]	OVERMEYER A, PALACIOS J, SMITH E. Ultrasonic de-icing bondline design and rotor ice testing[J]. AIAA Journal,2013,51(12):2965-2976. doi: 10.2514/1.J052601
[7]	THOMAS S K, CASSONI R P, MACARTHUR C D. Aircraft anti-icing and de-icing techniques and modeling[J]. Journal of Aircraft,1996,33(5):841-854.
[8]	蔺瑞, 颜正国, 刘涛, 等. 60 t钢包浇注过程中汇流旋涡形成机理[J]. 过程工程学报, 2010, 10(4):655-659. LIN R, YAN Z G, LIU T, et al. Modeling formation mechanism of vortex during steel casting in a 60 t ladle[J]. The Chinese Journal of Process Engineering,2010,10(4):655-659(in Chinese).
[9]	WROBLEWSKI G, KIELBASINSKI K, SWATOWSKA B, et al. Carbon nanomaterials dedicated to heating systems[J]. Circuit World,2015,41(3):102-106. doi: 10.1108/CW-05-2015-0021
[10]	PROLONGO S G, MORICHE R, ROSARIO G D, et al. Joule effect self-heating of epoxy composites reinforced with graphitic nanofillers[J]. Journal of Polymer Research,2016,23(9):189. doi: 10.1007/s10965-016-1092-4
[11]	RAJI A R O, VARADHACHARY T, NAN K, et al. Composites of graphene nanoribbon stacks and epoxy for joule heating and deicing of surfaces[J]. ACS Applied Materials & Interfaces,2016,8(5):3551-3559.
[12]	WANG T, ZHENG Y, RAJI A R O, et al. Passive anti-icing and active deicing films[J]. ACS Applied Materials & Interfaces,2016,8(22):14169-14173.
[13]	秦红梅, 邓超然, 李明专, 等. 石墨烯纳米薄片-SiO₂/天然橡胶复合材料的导电导热性能[J]. 复合材料学报, 2019, 36(11):2683-2691. QIN H M, DENG C R, LI M Z, et al. Electrical and thermal properties of nano graphene sheets-SiO₂/natural rubber composites[J]. Acta Materiae Compositae Sinica,2019,36(11):2683-2691(in Chinese).
[14]	周宏, 朴明昕, 李芹, 等. 氧化石墨烯纳米片/环氧树脂复合材料的制备与性能[J]. 复合材料学报, 2015, 32(5):1309-1315. ZHOU H, PIAO M X, LI Q, et al. Preparation and properties of graphene oxide nanosheeets/epoxy composites[J]. Acta Materiae Compositae Sinica,2015,32(5):1309-1315(in Chinese).
[15]	ZHOU W, MAO L, HU X, et al. An optimized graphene oxide self-assembly surface for significantly enhanced boiling heat transfer[J]. Carbon,2019,150:168-178. doi: 10.1016/j.carbon.2019.04.119
[16]	PRAVEEN B, SURESH S, PETHURAJAN V. Heat transfer performance of graphene nano-platelets laden micro-encapsulated PCM with polymer shell for thermal energy storage based heat sink[J]. Applied Thermal Engineering,2019,156:237-249. doi: 10.1016/j.applthermaleng.2019.04.072
[17]	ZHOU Y, CUI X, WENG J, et al. Experimental investigation of the heat transfer performance of an oscillating heat pipe with graphene nanofluids[J]. Powder Technology,2018,332:371-380. doi: 10.1016/j.powtec.2018.02.048
[18]	NADDAF A, HERIS S Z, POULADI B. An experimental study on heat transfer performance and pressure drop of nanofluids using graphene and multi-walled carbon nanotubes based on diesel oil[J]. Powder Technology,2019,352:369-380. doi: 10.1016/j.powtec.2019.04.078
[19]	秦国锋, 张婧婧, 徐子威, 等. BN纤维对石墨烯微片/聚丙烯复合材料导热绝缘性能的影响[J]. 复合材料学报, 2020, 37(3):546-552. QIN G F, ZHANG J J, XU Z W, et al. Effect of BN fiber on thermal conductivity and insulation properties of graphene nanoplatelets/polypropylene composites[J]. Acta Materiae Compositae Sinica,2020,37(3):546-552(in Chinese).
[20]	ZHANG Q, YU Y, YANG K, et al. Mechanically robust and electrically conductive graphene-paper/glass-fibers/epoxy composites for stimuli-responsive sensors and Joule heating deicers[J]. Carbon,2017,124:296-307. doi: 10.1016/j.carbon.2017.09.001
[21]	ZANJANI J S M, OKAN B S, MENCELOGLU Y Z, et al. Nano-engineered design and manufacturing of high-performance epoxy matrix composites with carbon fiber/selectively integrated graphene as multi-scale reinforcements[J]. RCS Advances,2016,6(12):9495-9506.
[22]	ZANJANI J S M, OKAN B S, PAPPAS P N, et al. Tailoring viscoelastic response, self-heating and deicing properties of carbon-fiber reinforced epoxy composites by graphene modification[J]. Composites Part A: Applied Science and Manufacturing,2018,106:1-10. doi: 10.1016/j.compositesa.2017.12.008
[23]	LIU Y, LI Y, YANG Y, et al. Preparation and properties of graphene oxide–carbon fiber/phenolic resin composites[J]. Carbon,2013,52:624.
[24]	KONG Q Q, LIU Z, GAO J G, et al. Hierarchical graphene-carbon fiber composite paper as a flexible lateral heat spreader[J]. Advanced Functional Materials,2014,24(27):4222-4228. doi: 10.1002/adfm.201304144
[25]	CHEN L, ZHANG Y, WU Q. Heat transfer optimization and experimental validation of anti-icing component for helicopter rotor[J]. Applied Thermal Engineering,2017,127:662-670. doi: 10.1016/j.applthermaleng.2017.07.169
[26]	CHEN L, ZHANG Y, WU Q, et al. Numerical simulation and optimization analysis of anti-/de-icing component of helicopter rotor based on big data analytics[M]//ZHANG L, SONG X, WU Y. Theory, methodology, tools and applications for modeling and simulation of complex systems. Singapore: Springer, 2016.
[27]	BALANDIN A A, GHOSH S, BAO W, et al. Superior thermal conductivity of single-layer graphene[J]. Nano Letters,2008,8(3):902-907. doi: 10.1021/nl0731872