Citation: | SUN Hongyu, LV Xingcong, GUO Chuigen, et al. Micromechanical model of tensile properties of poplar fiber/polyethylene composite[J]. Acta Materiae Compositae Sinica, 2021, 38(1): 155-164. doi: 10.13801/j.cnki.fhclxb.20200511.002 |
[1] |
IBRAHIM H, MEHANNY S, DARWISH L, et al. A comparative study on the mechanical and biodegradation characteristics of starch-based composites reinforced with different lignocellulosic fibers[J]. Journal of Polymers and the Environment, 2018, 26(6): 2434-2447.
|
[2] |
王瑞, 王春红. 亚麻落麻纤维增强可降解复合材料的拉伸强度预测[J]. 复合材料学报, 2009, 26(1):43-47. doi: 10.3321/j.issn:1000-3851.2009.01.008
WANG Rui, WANG Chunhong. Prediction of tensile strength of flax noil fibers reinforced biodegradable composite[J]. Acta Materiae Compositae Sinica,2009,26(1):43-47(in Chinese). doi: 10.3321/j.issn:1000-3851.2009.01.008
|
[3] |
DELGADO-AGUILAR M, REIXACH R, TARRÉS Q, et al. Bleached kraft eucalyptus fibers as reinforcement of poly(lactic acid) for the development of high-performance biocomposites[J]. Polymers, 2018, 10(7): 699.
|
[4] |
PHUA Y J, PEGORETTI A, MOHD ISHAK Z A. Experimental analysis and theoretical modeling of the mechanical behavior of starch-grafted-polypropylene/kenaf fibers composites[J]. Polymer Composites, 2018, 39(9): 3289-3299.
|
[5] |
栗越, 张京发, 易顺民, 等. 改性芳纶纤维增强木粉/高密度聚乙烯复合材料的力学性能[J]. 复合材料学报, 2019, 36(3):638-645.
LI Yue, ZHANG Jingfa, YI Shunmin, et al. Mechanical properties of modified aramid fiber reinforced wood flour/high density polyethylene composites[J]. Acta Materiae Compositae Sinica,2019,36(3):638-645(in Chinese).
|
[6] |
朱碧华, 何春霞, 石峰, 等. 三种壳类植物纤维/聚氯乙烯复合材料性能比较[J]. 复合材料学报, 2017, 34(2):291-297.
ZHU Bihua, HE Chunxia, SHI Feng, et al. Performance comparison of three kinds of husk’s fibers/polyvinyl chloride composites[J]. Acta Materiae Compositae Sinica,2017,34(2):291-297(in Chinese).
|
[7] |
曹岩. 纤维尺寸及分布对WPCs力学性能的影响[D]. 哈尔滨: 东北林业大学, 2013.
CAO Yan. Effect of fiber size and distribution on the mechanical properties of WPCs[D]. Harbin: Northeast Forestry University, 2013(in Chinese).
|
[8] |
HALPIN J C, TSAI S W. Environmental factors in composite materials design: Technical Report AFML-TR[R]. United State Air Force Materials Laboratory, 1969.
|
[9] |
KALAPRASAD G, JOSEPH K, THOMAS S, et al. Theoretical modelling of tensile properties of short sisal fibre-reinforced low-density polyethylene composites[J]. Journal of Materials Science, 1997, 32(16): 4261-4267.
|
[10] |
HASSANZADEH-AGHDAM M K, JAMALI J. A new form of a Halpin-Tsai micromechanical model for characterizing the mechanical properties of carbon nanotube-reinforced polymer nanocomposites[J]. Bulletin of Materials Science, 2019, 42(3): 117.
|
[11] |
CLIFFORD M J, WAN T. Fibre reinforced nanocomposites: Mechanical properties of PA6/clay and glass fibre/PA6/clay nanocomposites[J]. Polymer, 2010, 51(2): 535-539.
|
[12] |
COX H L. The elasticity and strength of paper and other fibrous materials[J]. British Journal of Applied Physics,1952,3(3):72-79.
|
[13] |
MIGNEAULT S, KOUBAA A, ERCHIQUI F, et al. Application of micromechanical models to tensile properties of wood-plastic composites[J]. Wood Science and Technology, 2011, 45(3): 521-532.
|
[14] |
GUN H, KOSE G. Prediction of longitudinal modulus of aligned discontinuous fiber-reinforced composites using boundary element method[J]. Science and Engineering of Composite Materials, 2014, 21(2): 219-221.
|
[15] |
KELLY A, TYSON W R. Tensile properties of fibre-reinforced metals: Copper/tungsten and copper/molybdenum[J]. Journal of the Mechanics and Physics of Solids, 1965, 13(6): 329-338.
|
[16] |
LI Y, PICKERING K L, FARRELL R L. Determination of interfacial shear strength of white rot fungi treated hemp fibre reinforced polypropylene[J]. Composites Science and Technology, 2009, 69(7-8): 1165-1171.
|
[17] |
SERRANO A, ESPINACH F X, JULIAN F, et al. Estimation of the interfacial shears strength, orientation factor and mean equivalent intrinsic tensile strength in old newspaper fiber/polypropylene composites[J]. Composites Part B: Engineering, 2013, 50: 232-238.
|
[18] |
YAN X, YANG Y, HAMADA H. Tensile properties of glass fiber reinforced polypropylene composite and its carbon fiber hybrid composite fabricated by direct fiber feeding injection molding process[J]. Polymer Composites, 2018, 39(10): 3564-3574.
|
[19] |
LAW T T, PHUA Y J, SENAWI R, et al. Experimental analysis and theoretical modeling of the mechanical behavior of short glass fiber and short carbon fiber reinforced polycarbonate hybrid composites[J]. Polymer Composites, 2016, 37(4): 1238-1248.
|
[20] |
ASTM International. Standard test method for tensile properties of plastics: ASTM D638—14[S]. West Conshohocken: ASTM International, 2014.
|
[21] |
VALLEJOS M E, ESPINACH F X, JULIÁN F, et al. Micromechanics of hemp strands in polypropylene composites[J]. Composites Science and Technology, 2012, 72(10): 1209-1213.
|
[22] |
ESPINACH F X, JULIAN F, VERDAGUER N, et al. Analysis of tensile and flexural modulus in hemp strands/polypropylene composites[J]. Composites Part B: Engineering, 2013, 47: 339-343.
|
[23] |
LÓPEZ J P, BOUFI S, MANSOURI N E E, et al. PP composites based on mechanical pulp, deinked newspaper and jute strands: A comparative study[J]. Composites Part B: Engineering, 2012, 43(8): 3453-3461.
|
[24] |
YAN X, CAO S. Structure and interfacial shear strength of polypropylene-glass fiber/carbon fiber hybrid composites fabricated by direct fiber feeding injection molding[J]. Composite Structures, 2018, 185: 362-372.
|
[25] |
BOWYER W H, BADER H G. On the reinforcement of thermoplastics by imperfectly aligned discontinuous fibres[J]. Materials. Science, 1972, 4(3): 1315-1321.
|
[26] |
HIRSCH T. Modulus of elasticity of concrete affected by elastic moduli of cement paste matrix and aggregate[J]. American Concrete Institute. 1962, 59(1): 154-427.
|
[27] |
SERRANO A, ESPINACH F X, TRESSERRAS J, et al. Macro and micromechanics analysis of short fiber composites stiffness: The case of old newspaper fibers-polypropylene composites[J]. Materials & Design, 2014, 55: 319-324.
|
[28] |
OLIVER-ORTEGA H, CHAMORRO-TRENADO M À, SOLER J, et al. Macro and micromechanical preliminary assessment of the tensile strength of particulate rapeseed sawdust reinforced polypropylene copolymer biocomposites for its use as building material[J]. Construction and Building Materials, 2018, 168: 422-430.
|
[29] |
ZHANG Y, ZHANG S Y, CHOI P. Effects of wood fiber content and coupling agent content on tensile properties of wood fiber polyethylene composites[J]. Holz als Roh- und Werkstoff, 2008, 66(4): 267-274.
|
[30] |
EL-SHEKEIL Y A, SAPUAN S M, ABDAN K, et al. Influence of fiber content on the mechanical and thermal properties of Kenaf fiber reinforced thermoplastic polyurethane composites[J]. Materials & Design, 2012, 40: 299-303.
|
[31] |
VENKATESHWARAN N, ELAYAPERUMAL A, JAGATHEESHWARAN M S. Effect of fiber length and fiber content on mechanical properties of banana fiber/epoxy composite[J]. Journal of Reinforced Plastics and Composites, 2011, 30(19): 1621-1627.
|
[32] |
宋丽贤, 张平, 姚妮娜, 等. 木粉粒径和填量对木塑复合材料力学性能影响研究[J]. 功能材料, 2013, 44(17): 2451-2454.
SONG Lixian, ZHANG Ping, YAO Nina, et al. Study on effect of particle diameter and filling quantity of wood flour on mechanical properties of wood-plastics composite[J]. Journal of Functional Materials, 2013, 44(17): 2451-2454(in Chinese).
|