Citation: | DU Peijian, WANG Xinmiao, LV Qingtao, et al. Damage characterization of quartz woven fabric and change of the fiber distribution orientation of needle punched quartz fiber felt[J]. Acta Materiae Compositae Sinica, 2021, 38(1): 268-278. doi: 10.13801/j.cnki.fhclxb.20200507.004 |
[1] |
张晓虎, 李贺军, 郝志彪, 等. 碳喷管-碳材料出口锥预制体技术[J]. 材料导报, 2007, 21(2):98-101. doi: 10.3321/j.issn:1005-023X.2007.02.025
ZHANG Xiaohu, LI Hejun, HAO Zhibiao, et al. Preform technology of carbon-carbon composites nozzle exit cone[J]. Materials Review,2007,21(2):98-101(in Chinese). doi: 10.3321/j.issn:1005-023X.2007.02.025
|
[2] |
郑蕊, 徐征, 李旭嘉, 等. 不同针刺预制体结构对C/C复合材料力学性能的影响[J]. 宇航材料工艺, 2012, 42(5):26-29. doi: 10.3969/j.issn.1007-2330.2012.05.006
ZHENG Rui, XU Zheng, LI Jiaxu, et al. Effect of needled preform structure on mechanical properties of C/C composite[J]. Aerospace Materials & Technology,2012,42(5):26-29(in Chinese). doi: 10.3969/j.issn.1007-2330.2012.05.006
|
[3] |
王小群, 杜善义, 韩杰才. 高速宽频带防空导弹天线罩研制探讨[J]. 宇航材料工艺, 1998(2):17-23.
WANG Xiaoqun, DU Shanyi, HAN Jiecai. The study on manufacturing of radome for board-band supersonic missile[J]. Aerospace Materials & Technology,1998(2):17-23(in Chinese).
|
[4] |
陈利, 张春燕, 陈小明, 等. 石英纤维单向编织扁带的结构与性能[J]. 天津工业大学学报, 2017, 36(3):28-32. doi: 10.3969/j.issn.1671-024x.2017.03.006
CHEN Li, ZHANG Chunyan, CHEN Xiaoming, et al. Structure and properties of quartz unidirectional braided flat tapes[J]. Journal of Tianjin Polytechnic University,2017,36(3):28-32(in Chinese). doi: 10.3969/j.issn.1671-024x.2017.03.006
|
[5] |
纪伶伶, 嵇阿琳, 李飞, 等. 不同机织结构碳布针刺后拉伸性能[J]. 宇航材料工艺, 2013, 43(5):38-42. doi: 10.3969/j.issn.1007-2330.2013.05.008
JI Lingling, JI Alin, LI Fei, et al. Tensile stress of needled carbon cloth with different woven structures[J]. Aerospace Materials & Technology,2013,43(5):38-42(in Chinese). doi: 10.3969/j.issn.1007-2330.2013.05.008
|
[6] |
杨丽燕. 基于针刺加固的高温滤料玻纤基布损伤性研究[D]. 上海: 东华大学, 2012.
YANG Liyan. The study of damage on glass fiber base fabric of high temperature resistant filter material due to needle punched[D]. Shanghai: Donghua University, 2012(in Chinese).
|
[7] |
刘建军, 李铁虎, 郝志彪, 等. 针刺碳布网胎复合织物中的纤维转移和损伤研究[J]. 炭素技术, 2008, 27(5):13-15.
LIU Jianjun, LI Tiehu, HAO Zhibiao, et al. Study on fiber transfer and damage of composite fabric made by needle punched carbon cloth and web[J]. Carbon Techniques,2008,27(5):13-15(in Chinese).
|
[8] |
ROY R, ISHTIAQUE S M. Influcence of punching parameters on fiber orientation and related physical and mechanical properties of needle punched nonwoven[J]. Fibers and Polymers, 2019, 20(1): 191-198.
|
[9] |
KANG T J, CHOI S H, KIM S M, et al. Automatic structure analysis and objective evaluation of woven fabric using image analysis[J]. Textile Research Journal,2001,71(3):261-270. doi: 10.1177/004051750107100312
|
[10] |
ÇAY A, VASSILIADIS S, RANGOUSSI M, et al. On the use of image processing techniques for the estimation of the porosity of textile fabrics[J]. International Journal of Materials and Textile Engineering,2007,1(2):421-424.
|
[11] |
ALGABA I, RIVA A, CREWS P C. Influence of fiber type and fabric porosity onthe UPF of summer fabrics[J]. AATCC Review,2004,4(2):26-31.
|
[12] |
TÀPIAS M, RALLÓ M, ESCOFET J, et al. Objective measure of woven fabric’s cover factor by image processing[J]. Textile Research Journal,2009,80 (1):35-44.
|
[13] |
TÀPIAS M, RALLÓ M, ESCOFET J. Automatic measurements of partial cover factors and yarn diameters in fabrics using image processing[J]. Textile Research Journal,2010,81(2):173-186.
|
[14] |
宋磊磊, 李嘉禄, 赵玉芬, 等. 预制体结构对针刺石英纤维/环氧树脂复合材料导热性能的影响[J]. 复合材料学报, 2016, 33(5):955-961.
SONG Leiei, LI Jialu, ZHAO Yufen, et al. Effects of preform structure on thermal conductivity of needle-punched quartz fiber/epoxy composites[J]. Acta Materiae Compositae Sinica,2016,33(5):955-961(in Chinese).
|
[15] |
范尚武, 张立同, 成来飞. 三维针刺C/SiC刹车材料的热物理性能[J]. 复合材料学报, 2011, 28(3):56-62.
FAN Shangwu, ZHANG Litong, CHENG Laifei. Thermal physical properties of 3D needled C/SiC brake materials[J]. Acta Materiae Compositae Sinica,2011,28(3):56-62(in Chinese).
|
[16] |
陈阳, 陈霞, 汪军. 基于图像处理的织物覆盖系数检测[J]. 西安工程大学学报, 2016, 30(1):16-20.
CHEN Yang, CHEN Xia, WANG Jun. Inspection on the cover factors of fabrics based on image processing[J]. Journal of Xi’an Polytechnic University,2016,30(1):16-20(in Chinese).
|
[17] |
梁翠芳, 陈霞, 傅婷, 等. 基于图像处理的网格圈织物孔隙率检测[J]. 纺织学报, 2014, 35(5):49-54.
LIANG Cuifang, CHEN Xia, FU Ting, et al. Inspection method of lattice apron porosity based on image processing[J]. Journal of Textile Reasearch,2014,35(5):49-54(in Chinese).
|
[18] |
中国国家标准化管理委员会. 增强材料-机织物试验方法第5部分: 玻璃纤维拉伸断裂强力和断裂伸长的测定: GB/T 7689.5—2013[S]. 北京: 中国标准出版社, 2014.
Standardization Administration of the People’s Republic of China. Reinforcements: Test method for woven fabrics Part 5: Determination of glass fiber tensile breaking force and elongation at break: GB/T 7689.5—2013[S]. Beijing: China Standards Press, 2014(in Chinese).
|
[19] |
吴冰, 秦志远. 自动确定图像二值化最佳阈值的新方法[J]. 测绘学院学报, 2001, 18(4):283-286.
WU Bing, QIN Zhiyuan. New approaches for the automatic selection of the optimal threshold in image binarization[J]. Journal of Institute of Surveying and Mapping,2001,18(4):283-286(in Chinese).
|
[20] |
李一雷. 一种自适应阈值二值法在泡界线检测中的应用[J]. 浙江交通职业技术学院学报, 2018, 19(1):49-53.
LI Yilei. The application of an adaptive threshold binarization algorithm in foam line detection[J]. Journal of Zhejiang Institute of Communications,2018,19(1):49-53(in Chinese).
|
[21] |
刘晓玉, 王欢欢. 光照不均匀钢坯缺陷图像的二值化方法[J]. 控制工程, 2018, 12(25):42-45.
LIU Xiaoyu, WANG Huanhuan. Non-uniform illumination and binary processing of billet defect detection[J]. Control Engineering of China,2018,12(25):42-45(in Chinese).
|