Dielectric and thermal properties of nano Mg(OH)<sub>2</sub>-ZnO/polyimide composite film

WANG Xiangwen; FAN Yong; CHEN Hao; YANG Ruixiao; ZHAO Wei

doi:10.13801/j.cnki.fhclxb.20170331.001

Volume 35 Issue 1

Turn off MathJax

Article Contents

Article Navigation > Acta Materiae Compositae Sinica > 2018 > 35(1): 30-34

WANG Xiangwen, FAN Yong, CHEN Hao, et al. Dielectric and thermal properties of nano Mg(OH)2-ZnO/polyimide composite film[J]. Acta Materiae Compositae Sinica, 2018, 35(1): 30-34. doi: 10.13801/j.cnki.fhclxb.20170331.001

Citation:

WANG Xiangwen, FAN Yong, CHEN Hao, et al. Dielectric and thermal properties of nano Mg(OH)₂-ZnO/polyimide composite film[J]. Acta Materiae Compositae Sinica, 2018, 35(1): 30-34. doi: 10.13801/j.cnki.fhclxb.20170331.001

Citation:

PDF( 10254 KB)

Dielectric and thermal properties of nano Mg(OH)₂-ZnO/polyimide composite film

doi: 10.13801/j.cnki.fhclxb.20170331.001

1.
College of Materials Science and Engineering, Harbin University of Science and Technology, Harbin 150040, China;
2.
Key Laboratory of Engineering Dielectric and Its Application, Ministry of Education, Harbin University of Science and Technology, Harbin 150080, China

Received Date: 2016-01-11
Rev Recd Date: 2017-03-30
Publish Date: 2018-01-15

Abstract

Abstract

Nano Mg(OH)₂-Zn(OH)₂ particles were prepared by reverse precipitation method, nano Mg(OH)₂-ZnO/polyimide(PI) composite films with different mass contents of Mg(OH)₂-ZnO were successfully prepared by in-situ polymerization and thermal imidization. The surface morphology, thermal stability, dielectric properties and breakdown strength of the films were characterized by SEM, TG, dielectric spectrum tester and breakdown strength tester. The results show that the Mg(OH)₂-ZnO nanoparticles are homogeneously dispersed in the PI matrix, thermal stability decreases, dielectric constant, dielectric loss and electrical conductivity have been increased, the breakdown strength of nano Mg(OH)₂-ZnO/PI composite films increases first and then decreases with the increasing of nanoparticles, and reaches a maximum value of 296 kV/mm at nanoparticle content of 2%.
- film,
- polyimide,
- breakdown strength,
- dielectric properties,
- thermal property
Long Abstrsct
Innovation Points