复合材料损伤阻抗和损伤容限的性能表征

沈真; 张子龙; 王进; 杨胜春; 叶林

复合材料损伤阻抗和损伤容限的性能表征

1.
中国飞机强度研究所, 西安 710065;
2.
北京航空材料研究院, 北京 100095;
3.
沈阳飞机设计研究所, 沈阳 110035;
4.
Centre for Advanced Materials Technology, School of Aerospace, Mechanical &|Mechatronic Engineering. The University of Sydney, Sydney, NSW 2006, Australia

基金项目: 国防重点实验室基金(00JS49.3.1.HK5301)资助项目;航空科学基金(01B23001)资助项目

详细信息

中图分类号: TB 330.1
计量
- 文章访问数: 2440
- HTML全文浏览量: 61
- PDF下载量: 1679
出版历程
- 收稿日期: 2003-07-06
- 修回日期: 2003-10-29
- 刊出日期: 2004-10-14

CHARACTERIZATION OF DAMAGE RESISTANCE AND DAMAGE TOLERANCE BEHAVIOUR OF COMPOSITE LAMINATES

1.
Aircraft Strength Research Institute of China,Xi'an 710065, China;
2.
Beijing Institute of Aeronautical Materials,Beijing 100095, China;
3.
Shenyang Aircraft Design Research Institute, Shenyang 110035,China;
4.
Centre for Advanced Materials Technology, School of Aerospace, Mechanical &|Mechatronic Engineering. The University of Sydney, Sydney, NSW 2006, Australia

摘要

摘要: 复合材料结构的设计要求和使用经验提出了复合材料体系损伤阻抗和损伤容限性能表征的需求。在试验研究的基础上,本文作者指出长期以来一直使用的CAI (冲击后压缩强度) 的物理意义比较含混,有时可能误导材料研究和设计选材,同时提出应分别用典型层压板静压痕力-凹坑深度曲线的最大压痕力F_max来表征损伤阻抗性能,用凹坑深度-压缩破坏应变曲线门槛值CAIT(Compression failure strain After Impact Threshold)来表征损伤容限性能,同时给出了测试方法的建议。
- 复合材料 /
- 性能表征 /
- 损伤容限 /
- 损伤阻抗 /
- F_max /
- CAIT
Abstract: The need to characterize damage resistance and damage tolerance behaviour of composite laminates was proposed by the design requirements and usage experience. Based on the experimental study, the authors pointed out that traditional CAI (by NASA standard) could not guide development of materials and structural design correctly. In the paper, it was proposed that the damage resistance behaviour could be characterized by the maximum contact force F_max of the contact force-dent depth curve of typical laminates and the damage tolerance behaviour could be characterized by the threshold CAIT(Compression failure strain After Impact Threshold) of the dent depth -compressive failure strain curve of typical laminates. In the meanwhile the suggestion for their measurement methods was proposed as well.
- composite materials /
- behaviour characterization /
- damage resistance /
- damage tolerance /
- F_max /
- CAIT

HTML全文

参考文献(0)

施引文献

资源附件(0)

长摘要

创新点

计量

文章访问数: 2440
HTML全文浏览量: 61
PDF下载量: 1679
被引次数: 0

复合材料损伤阻抗和损伤容限的性能表征

计量

出版历程

CHARACTERIZATION OF DAMAGE RESISTANCE AND DAMAGE TOLERANCE BEHAVIOUR OF COMPOSITE LAMINATES

计量

出版历程

目录