基于多尺度模型的复合材料厚板<i>G</i><sub>13</sub>剪切失效分析

贾利勇; 贾欲明; 于龙; 李苗; 张旷怡; 贺高

doi:10.13801/j.cnki.fhclxb.20160630.001

基于多尺度模型的复合材料厚板G₁₃剪切失效分析

1.
中航工业第一飞机设计研究院, 西安 710089;
2.
帝国理工学院机械工程系, 英国伦敦 SW7 2AZ

详细信息

通讯作者:
贺高,研究员,研究方向为复合材料结构设计及强度分析,E-mail:hegao603@163.com

中图分类号: TB330.1;V258+.3
计量
- 文章访问数: 1345
- HTML全文浏览量: 113
- PDF下载量: 485
出版历程
- 收稿日期: 2016-04-19
- 修回日期: 2016-06-21
- 刊出日期: 2017-04-14

Failure analysis of thick composite laminates with multi-scale modelling under G₁₃ out-of-plane shear loading

1.
First Aircraft Institute of AVIC, Xi'an 710089, China;
2.
Department of Mechanical Engineering, Imperial College London, London SW7 2AZ, UK

摘要

摘要: 针对复合材料厚板强度分析问题，通过对子层压板的刚度等效和应力/应变分解建立了一种多尺度分析模型，并引入了剪切非线性本构关系。实现了复合材料厚板结构在子层压板水平的有限元计算和铺层水平的失效判断。采用FORTRAN语言编写了适用于Abaqus/Explicit求解器的VUMAT子程序，用于模拟复合材料厚板剪切非线性响应以及面内失效，子层压板之间采用内聚力模型来模拟分层损伤。分别采用多尺度线性模型和非线性模型对厚层压板G₁₃剪切试验进行了数值预测，并与试验结果进行了对比。分析结果表明：线性计算模型在预测结构承载能力方面有较高的精度，但在预测整体载荷-位移响应时与试验值偏差较大；由多尺度非线性计算模型得到的破坏模式以及载荷-位移曲线均与试验结果吻合较好。
- 复合材料 /
- 厚板 /
- 刚度等效 /
- 剪切非线性 /
- VUMAT
Abstract: For strength analysis of thick composite laminate, a multi-scale model based on sub-laminate stiffness homogenizing and stress/strain decomposition was introduced, in which the shear nonlinearity was also considered. In this way, the thick laminate could be modelled at a sub-laminate level and the structural failure could be predicted at a ply level. A user-defined FORTRAN subroutine (VUMAT) was written to model the shear nonlinearity and intra-laminar failure, and the cohesive zone model was introduced to predict the delamination between two sub-laminates. The strength and structural response of G₁₃ out-of-plane shear test were predicted with both multi-scale linear and non-linear model. By comparison with the experimental results, it is found that the multi-scale linear model works well in predicting structural load capacity, but significantly differs from experimental results when predicting the global load-displacement response. For multi-scale non-linear model, both the failure mode and the load-displacement curve fit well with the experimental results.
- composites /
- thick laminate /
- stiffness homogenizing /
- shear nonlinearity /
- VUMAT

HTML全文

参考文献(0)

施引文献(9)

期刊类型引用(4)

1.	贺体人，刘刘，徐吉峰. 数字图像相关方法辅助的IM7/8552碳纤维/环氧树脂复合材料单向带层合板沿厚度方向非线性本构参数识别. 复合材料学报. 2021(01): 177-185 . 本站查看
2.	顾付伟，顾周越，朱晓磊，陆晓峰，方岱宁，李鲤. 一种无焊缝连接金属内衬复合材料压力容器的制备工艺及其液压实验. 复合材料学报. 2021(01): 198-208 . 本站查看
3.	程晖，樊新田，徐冠华，杨语，王岚. 航空复合材料结构精密干涉连接技术综述. 航空学报. 2021(10): 55-73 . 百度学术
4.	袁野. 复合材料厚板单钉连接强度研究及失效区分析. 科学技术创新. 2018(14): 13-14 . 百度学术