纯镁对碳化硼颗粒的常压浸渗

INVESTIGATION OF NORMAL PRESSUE INFILTRATION OF PURE MAGNESIUM INTO BORON CARBIDE PARTICLE

摘要

摘要: 本文研究了纯镁对不同致密度的碳化硼(B₄C)颗粒基片的常压浸渗性;讨论了镁液对B₄C颗粒聚集体常压浸渗的影响因素;提出了浸渗模型。研究表明,纯镁在氩气保护下,800～850℃温度范围保温30min即可浸渗B₄C颗粒聚集体。浸渗深度和宽度随加热温度升高和保温时间延长而增加;常压浸渗的B₄C_P/Mg复合材料具有很高的硬度,B₄C颗粒在基体中分布较均匀。
- 镁基复合材料 /
- 常压浸渗 /
- 碳化硼颗粒
Abstract: In this paper,normal pressure infiltration of pure magnesium into B₄C particle base plate with different compactibilities was studied,and the influence factors on the normal pressure infiltration are discussed.An infiltration model is suggested.It is shown that the magnesium can infiltrate into the gathering preform of B₄C particles in a range of temperature from 800 to 850℃ for 30min under the condition of Ar atmosphere.The depth and the width of infiltration increase as the temperature and time increase.B₄C_P/Mg composite obtained by the method of normal pressure infiltration has high hardness,and B₄C particles are dispersed homogeneously in the magnesium matrix.
- magnesium matrix composite /
- normal pressure infiltration /
- boron carbide particle

1.	付彬国，李朝志，刘金海，李国禄，都志杰，宁子轩，廖婧雯，李云，李利东. 原位合成技术在非连续增强钛基复合材料中的应用及展望. 铸造. 2018(04): 312-316 . 百度学术
2.	毕文彪，崔洪芝，张新杰，王佳峰，王明亮. Q235低碳钢表面等离子熔覆TiB_2-TiC/Fe复合涂层及耐磨性. 复合材料学报. 2018(11): 3097-3105 . 本站查看