单丝断裂能量法研究温度对碳纤维/环氧界面性能的影响

蔡群; 李敏; 罗辑; 顾轶卓; 刘洪新; 张佐光

单丝断裂能量法研究温度对碳纤维/环氧界面性能的影响

1.
北京航空航天大学材料科学与工程学院, 空天材料与服役教育部重点实验室, 北京 100191;
2.
成都飞机工业(集团)有限责任公司, 成都 610091

基金项目: 国家自然基金(50803002); 北航领航创新基金(YWF-10-01-A03)

详细信息

中图分类号: TB332
计量
- 文章访问数: 1638
- HTML全文浏览量: 56
- PDF下载量: 908
出版历程
- 收稿日期: 2010-08-08
- 修回日期: 2011-01-10
- 刊出日期: 2011-08-14

Effects of temperature on interfacial property of carbon fiber / epoxy resin using single fiber fragmentation energy method

1.
Key Laboratory of Aerospace Materials and Performance (Ministry of Education), School of Materials Science and Engineering, Beihang University, Beijing 100191, China;
2.
Chengdu Aircraft Industrial (Group) Co., Ltd., Chengdu 610091, China

摘要

摘要: 针对两种不同上浆剂碳纤维/高温固化环氧树脂体系, 采用基于WND(Wagner-Nairn-Detassis)能量模型的单丝断裂法, 测试分析了从室温到130 ℃范围内单丝复合体系界面断裂能的变化规律, 研究了碳纤维上浆剂对界面耐热性能的影响, 并结合复合材料层板的短梁剪切性能, 分析了微观和宏观界面性能的关联性。结果表明: 在测试温度范围内, 碳纤维/环氧体系的界面断裂能随温度升高呈先下降而后基本不变的趋势, 去除上浆剂后界面断裂能及其随温度的变化程度与未去除上浆剂的情况存在差异, 说明上浆剂对界面耐热性有重要作用。碳纤维/环氧树脂层板层间剪切强度随温度升高线性下降, 与界面断裂能的变化规律不一致, 这与两种测试方法的原理及界面破坏位置的不同有关。
- 碳纤维复合材料 /
- 环氧树脂 /
- 单丝断裂测试 /
- WND能量模型 /
- 界面断裂能 /
- 温度
Abstract: By using single fiber fragmentation test(SFFT) based on WND (Wagner-Nairn-Detassis) energy model, the effects of temperature from ambient temperature to 130 ℃ on the interface fracture energy of two different kinds of sizing carbon fibers/ high temperature cured epoxy resin were investigated, and the effects of the sizing of carbon fibers on the heat resistance of the interphase was studied. Comparing with the short beam shear test, the relationship between micro and macro interfacial properties was analyzed. The results indicate that the interfacial fracture energy of the carbon fiber/epoxy resin decreases at the beginning and then almost unchanges from ambient temperature to 130 ℃. The interface fracture energy of the desized fibers and the effect of temperature are different from the case of the sized fibers, indicating that the sizing plays an important role on the heat resistance of interface. The interlaminar shear strength of the studied carbon fiber/epoxy laminates decreases linearly with increasing temperature, not according with the variation of the interface fracture energy. This is mainly attributed to the differences in the test principles of the two methods and the different damage locations of the interface.
- carbon fiber composites /
- epoxy resin /
- single fiber fragmentation test /
- WND energy model /
- interface fracture energy /
- temperature

HTML全文

参考文献(0)

施引文献(7)

期刊类型引用(3)

1.	张彬，彭刚，冯家臣，王绪财，王伟，陈春晓，高波，卢振宇. 弹道侵彻下透明复合装甲动态变形参数的测量分析. 工程塑料应用. 2022(09): 121-125+131 . 百度学术
2.	王荣惠，徐井利，张海云，刘岩，高营营，郭建芬，张建芹，孙魁远，梁国伟. 纤维增强复合材料分层损伤失效模拟计算方法. 工程塑料应用. 2022(12): 74-79 . 百度学术
3.	刘平，王相玉，黄舟. 泡沫填充蜂窝材料动态力学性能的物质点法模拟. 复合材料学报. 2020(09): 2230-2239 . 本站查看

其他类型引用(4)

资源附件(0)

长摘要

创新点

计量

文章访问数: 1638
HTML全文浏览量: 56
PDF下载量: 908
被引次数: 7

单丝断裂能量法研究温度对碳纤维/环氧界面性能的影响

计量

出版历程

Effects of temperature on interfacial property of carbon fiber / epoxy resin using single fiber fragmentation energy method

期刊类型引用(3)

其他类型引用(4)

计量

出版历程

目录