石墨烯-铁镍合金-聚乳酸复合材料的制备及其吸波性能

胡正浪; 吴海华; 杨增辉; 姜建堂; 周建新

doi:10.13801/j.cnki.fhclxb.20210903.004

石墨烯-铁镍合金-聚乳酸复合材料的制备及其吸波性能

doi: 10.13801/j.cnki.fhclxb.20210903.004

胡正浪^{1, 2},
吴海华^{1, 2, ,},
杨增辉^{1, 2},
姜建堂³,
周建新⁴

1.
三峡大学　机械与动力学院，宜昌 443002
2.
三峡大学　石墨增材制造技术与装备湖北省工程研究中心，宜昌 443002
3.
哈尔滨工业大学　材料科学与工程学院，哈尔滨 150001
4.
华中科技大学　材料成形与模具技术国家重点实验室，武汉 430074

基金项目: 国家自然科学基金(51575313)；华中科技大学材料成形与模具技术国家重点实验室开放课题研究基金(P2020-003)

详细信息

通讯作者:
吴海华，博士，教授，博士生导师，研究方向为3D打印吸波材料及其工程应用技术　E-mail: wuhaihua@ctgu.edu.cn

中图分类号: TB34；TP391.73
计量
- 文章访问数: 1402
- HTML全文浏览量: 806
- PDF下载量: 108
- 被引次数: 0
出版历程
- 收稿日期: 2021-07-13
- 修回日期: 2021-08-10
- 录用日期: 2021-08-17
- 网络出版日期: 2021-09-03
- 刊出日期: 2022-07-30

Preparation of graphene-iron-nickel alloy-polylactic acid composites and their microwave absorption properties

HU Zhenglang^{1, 2},
WU Haihua^{1, 2
, ,},
YANG Zenghui^{1, 2},
JIANG Jiantang³,
ZHOU Jianxin⁴

1.
College of Mechanical and Power Engineering, China Three Gorges University, Yichang 443002, China
2.
Hubei Engineering Research Center for Graphite Additive Manufacturing Technology and Equipment, China Three Gorges University, Yichang 443002, China
3.
School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China
4.
State Key Laboratory of Material Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan 430074, China

摘要

摘要: 发展轻量化、宽频带的微波吸收材料来应对严重的电磁污染是一个巨大的挑战。本文通过熔融沉积成形(FDM)工艺制备出石墨烯(GR)-铁镍合金(FeNi50)-聚乳酸(PLA)复合材料，采用XRD、Raman、SEM和矢量网络分析仪(VNA)对复合材料的物相结构、微观形貌和电磁性能进行表征分析，并讨论了GR-FeNi50质量比对复合材料吸波性能的影响。结果表明，与未添加GR的复合材料相比，复合材料内部形成了触发极化损耗的异质界面，并产生了丰富的褶皱和孔隙，从而增强了微波的多次反射和散射；随着GR-FeNi50质量比的增加，吸波性能先增强、后减弱，当GR-FeNi50质量比为4∶20时，吸波性能最佳，最小反射损耗达到−40.5 dB，有效吸收带宽为4.7 GHz(13.28~18 GHz)。其优异的吸波性能归因于良好的阻抗匹配和界面极化损耗、偶极极化损耗、电导损耗、磁损耗之间的协同作用。此外，与湿化学法制备的吸波材料相比，GR-FeNi50-PLA复合材料在环保、易加工和规模化生产方面具有优势。
- 复合材料 /
- 介电损耗 /
- 磁损耗 /
- 微波吸收 /
- 阻抗匹配 /
- 吸波材料
Abstract: The development of lightweight, broadband microwave absorbing materials to cope with severe electromagnetic pollution is a great challenge. In this paper, graphene (GR)-iron-nickel alloy (FeNi50)-polylactic acid (PLA) composites were prepared by fused deposition modeling (FDM) process, and the physical structure, micromorphology and electromagnetic properties of the composites were characterized by XRD, Raman, SEM and vector network analyzer (VNA). The effects of the GR-FeNi50 mass ratio on the microwave absorption properties of the composites were discussed. The results show that, compared with the composites without GR addition, heterogeneous interfaces triggering polarization loss are formed inside the composites, and abundant folds and pores are generated, which enhance the multiple reflections and scattering of microwaves. The minimum reflection loss reaches −40.5 dB and the effective absorption bandwidth is 4.7 GHz (13.28-18 GHz). The excellent absorption performance is attributed to the good impedance matching and the synergy between interfacial polarisation loss, dipole polarisation loss, conductivity loss and magnetic loss. In addition, the GR-FeNi50-PLA composite has advantages in terms of environmental friendliness, ease of processing and scale production compared to the absorbing materials prepared by wet chemical methods.
- composites /
- dielectric loss /
- magnetic loss /
- microwave absorption /
- impedance matching /
- absorbing materials

HTML全文

图 1 石墨烯(GR)的SEM (a) 和TEM (b) 图像；铁镍合金(FeNi50) (c) 和聚乳酸(PLA) (d) 的SEM图像

Figure 1. SEM image (a) and TEM image (b) of graphene (GR); SEM images of Fe-Ni alloy (FeNi50) (c) and polylactic acid (PLA) (d)

下载: 全尺寸图片幻灯片

图 2 (a) GR的N₂吸附-脱附等温线；(b) PLA的TG和DSC曲线

Figure 2. (a) N₂ adsorption-desorption isothermals of GR; (b) TG and DSC curves of PLA

S_g—Specific surface area of the tested sample; v_m—Saturated adsorption capacity of N₂ molecule monolayer in standard state; T_m—Melting temperature; T_d—Decomposition temperature

下载: 全尺寸图片幻灯片

图 3 (a) GR-FeNi50-PLA复合粉末；(b) GR-FeNi50-PLA复合线材；(c) 测试用的同轴环

Figure 3. (a) GR-FeNi50-PLA composite powders; (b) GR-FeNi50-PLA composite filaments; (c) Coaxial rings of testing

下载: 全尺寸图片幻灯片

图 4 不同GR质量分数GR-FeNi50-PLA复合材料的XRD图谱

Figure 4. XRD patterns of GR-FeNi50-PLA composites with different GR mass fraction

下载: 全尺寸图片幻灯片

图 5 不同GR质量分数GR-FeNi50-PLA复合材料的拉曼光谱

Figure 5. Raman spectra of GR-FeNi50-PLA composites with different GR mass fraction

I_D/I_G—Intensity ratio of the D band to the G band

下载: 全尺寸图片幻灯片

图 6 不同GR-FeNi50质量比GR-FeNi50-PLA复合材料的SEM图像

Figure 6. SEM images of GR-FeNi50-PLA composites with different GR-FeNi50 mass ratio

下载: 全尺寸图片幻灯片

图 7 6个不同GR-FeNi50质量比同轴环的电磁参数：在2~18 GHz频率范围内，复介电常数的实部(a)、虚部(b)和介电损耗角正切(c)；复磁导率的实部(d)、虚部(e)和磁损耗角正切(f)

Figure 7. Electromagnetic parameters of six coaxial rings with different GR-FeNi50 mass ratio: Real part (a), imaginary part (b); tangent dielectric loss (c) of the complex permittivity; Real part (d), imaginary part (e), tangent magnetic loss (f) of the complex permeability in the frequency range of 2–18 GHz

下载: 全尺寸图片幻灯片

图 8 不同GR-FeNi50质量比GR-FeNi50-PLA复合材料的的Cole–Cole曲线

Figure 8. Cole–Cole curves of GR-FeNi50-PLA composites with different GR-FeNi50 mass ratios

下载: 全尺寸图片幻灯片

图 9 不同GR-FeNi50质量比GR-FeNi50-PLA复合材料的的电导率

Figure 9. Conductivity of GR-FeNi50-PLA composites with different GR-FeNi50 mass ratios

下载: 全尺寸图片幻灯片

图 10 GR-FeNi50-PLA复合材料的电磁损耗机制示意图

Figure 10. Schematic illustration of electromagnetic loss mechanism of GR-FeNi50-PLA composites

下载: 全尺寸图片幻灯片

图 11 不同GR-FeNi50质量比GR-FeNi50-PLA复合材料的$ \mu ''{(\mu \prime )}^{-2}{f}^{-1} $计算值

Figure 11. Calculated $ \mu ''{(\mu \prime )}^{-2}{f}^{-1} $ for GR-FeNi50-PLA composites with different GR-FeNi50 mass ratios

下载: 全尺寸图片幻灯片

图 12 0wt GR-FeNi50-PLA (a)、 1wt%GR-FeNi50-PLA (b)、 2wt%GR-FeNi50-PLA (c)、3wt%GR-FeNi50-PLA (d)、4wt%GR-FeNi50-PLA (e) 和5wt%GR-FeNi50-PLA (f) 的反射损耗三维图和吸波曲线

Figure 12. 3D maps of reflection loss and microwave absorption curves of 0wt%GR-FeNi50-PLA (a), 1wt%GR-FeNi50-PLA (b),2wt%GR-FeNi50-PLA (c), 3wt%GR-FeNi50-PLA (d), 4wt%GR-FeNi50-PLA (e) and 5wt%GR-FeNi50-PLA (f)

R_{L_min}—Minimum reflection loss; E_AB—Electromagnetic wave absorption bandwidth

下载: 全尺寸图片幻灯片

图 13 (a) 不同GR-FeNi50质量比GR-FeNi50-PLA复合材料的衰减常数；(b) 4wt% GR-FeNi50-PLA的delta值二维图；(c) 5wt% GR-FeNi50-PLA的delta值二维图

Figure 13. (a) Attenuation constant of GR-FeNi50-PLA composites with different GR-FeNi50 mass ratio; Calculated delta value 2D maps: (b) 4wt% GR-FeNi50-PLA and (c) 5wt% GR-FeNi50-PLA

下载: 全尺寸图片幻灯片

表 1 GR-FeNi50-PLA复合材料的组分

Table 1. Components of GR-FeNi50-PLA composites

Sample	Mass fraction/wt%
Sample	GR	FeNi50	PLA
0wt%GR-FeNi50-PLA	0	20	80
1wt%GR-FeNi50-PLA	1	20	79
2wt%GR-FeNi50-PLA	2	20	78
3wt%GR-FeNi50-PLA	3	20	77
4wt%GR-FeNi50-PLA	4	20	76
5wt%GR-FeNi50-PLA	5	20	75

下载: 导出CSV

表 2 近3年其他文献GR基磁性复合材料吸波性能比较

Table 2. Comparison of microwave absorption performance of GR-based magnetic composites in other literature in the last 3 years

Material	Matrix	$ {\text{R}}{{\text{L}}_{{\text{min}}}} $/dB (mm)	Bandwidth/GHz	Ref.
FeNi₃/N-GN	Paraffin	−57.2(1.45)	3.4	[10]
KH550@Fe₃O₄/rGO	Paraffin	−49.32(1.48)	9.52	[39]
ZnCO₂O₄/C/MG	Paraffin	−52.9(3.5)	4.48	[42]
Fe₃O₄@SiO₂−rGO	Paraffin	−55.4(3.7)	6.24	[43]
SiC/Fe₃O₄/rGO	Paraffin	−30.3(2.0)	6.65	[44]
Fe-Co/NC/rGO	Paraffin	−43.26(2.5)	9.29	[45]
CoFe₂O₄/graphene	Paraffin	−55.2(1.7)	5.4	[46]
Co/NPC@ZnO/rGO	Paraffin	−25.4(2.0)	5.4	[47]
SGN/Fe₃O₄	Paraffin	−41(2.0)	5.3	[48]
Fe₃O₄−doped graphene	Paraffin	−53.6(1.8)	5.0	[49]
GR-FeNi50-PLA	PLA	−40.5(1.5)	4.7	This work
Notes: SGN—Sulfide doped graphene; MG—Magnetic graphene; GN—Graphene nanocrystals.

下载: 导出CSV

参考文献(49)

[1]	HUANG L, DUAN Y, DAI X, et al. Bioinspired metamater-ials: Multibands electromagnetic wave adaptability and hydrophobic characteristics[J]. Small,2019,15(40):1902730. doi: 10.1002/smll.201902730
[2]	LIU J, ZHANG H, SUN R, et al. Hydrophobic, flexible, and lightweight MXene foams for high-performance electromagnetic-interference shielding[J]. Advanced Materials,2017,29(38):1702367. doi: 10.1002/adma.201702367
[3]	WANG C, MURUGADOSS V, KONG J, et al. Overview of carbon nanostructures and nanocomposites for electromagnetic wave shielding[J]. Carbon,2018,140:696-733. doi: 10.1016/j.carbon.2018.09.006
[4]	WANG J, HUYAN Y, YANG Z, et al. Tubular carbon nano-fibers: Synthesis, characterization and applications in microwave absorption[J]. Carbon,2019,152:255-266. doi: 10.1016/j.carbon.2019.06.048
[5]	WANG Y, GAO X, WU X, et al. Facile design of 3D hierarchical NiFe₂O₄/N-GN/ZnO composite as a high performance electromagnetic wave absorber[J]. Chemical Engineering Journal,2019,375:121942. doi: 10.1016/j.cej.2019.121942
[6]	LI Y, LIU X, LIU R, et al. Improved microwave absorption properties by atomic-scale substitutions[J]. Carbon,2018,139:181-188. doi: 10.1016/j.carbon.2018.06.030
[7]	SHEN Z, XING H, WANG H, et al. Synthesis and enhanced electromagnetic absorption properties of Co-doped CeO₂/RGO nanocomposites[J]. Journal of Alloys and Compounds,2018,753:28-34. doi: 10.1016/j.jallcom.2018.04.195
[8]	SHU R, WAN Z, ZHANG J, et al. Facile design of three-dimensional nitrogen-doped reduced graphene oxide/multi-walled carbon nanotube composite foams as lightweight and highly efficient microwave absorbers[J]. ACS Applied Materials & Interfaces,2020,12(4):4689-4698.
[9]	吴海华, 胡正浪, 李雨恬, 等. 熔融沉积成形制备铁镍合金/聚乳酸复合材料的电磁吸收性能与力学性能[J]. 复合材料学报, 2022, 39(1):172-182. WU H H, HU Z L, LI Y T, et al. Electromagnetic absorption properties and mechanical properties of Fe-Ni alloy/polylactic acid composites fabricated by fused deposition modeling[J]. Acta Materiae Compositae Sinica,2022,39(1):172-182(in Chinese).
[10]	FENG J, ZONG Y, SUN Y, et al. Optimization of porous FeNi₃/N-GN composites with superior microwave absorption performance[J]. Chemical Engineering Journal,2018,345:441-451. doi: 10.1016/j.cej.2018.04.006
[11]	GUAN Z J, JIANG J T, YAN S J, et al. Sandwich-like cobalt/reduced graphene oxide/cobalt composite structure presenting synergetic electromagnetic loss effect[J]. Journal of Colloid and Interface Science,2020,561:687-695. doi: 10.1016/j.jcis.2019.11.045
[12]	WANG S, ZHAO Y, XUE H, et al. Preparation of flower-like CoFe₂O₄@graphene composites and their microwave absorbing properties[J]. Materials Letters,2018,223:186-189. doi: 10.1016/j.matlet.2018.04.050
[13]	YIN P, DENG Y, ZHANG L, et al. One-step hydrothermal synthesis and enhanced microwave absorption properties of Ni_0.5Co_0.5Fe₂O₄/graphene composites in low frequency band[J]. Ceramics International,2018,44(17):20896-20905. doi: 10.1016/j.ceramint.2018.08.096
[14]	HEIDARI P, MASOUDPANAH S M. A facial synthesis of MgFe₂O₄/RGO nanocomposite powders as a high performance microwave absorber[J]. Journal of Alloys and Compounds,2020,834:155166. doi: 10.1016/j.jallcom.2020.155166
[15]	CHEN W, LIU Q, ZHU X, et al. One-stepin situ growth of magnesium ferrite nanorods on graphene and their microwave-absorbing properties[J]. Applied Organometallic Chemistry,2018,32(2):e4017.
[16]	HU C, LI Z, WANG Y, et al. Comparative assessment of the strain-sensing behaviors of polylactic acid nanocompo-sites: Reduced graphene oxide or carbon nanotubes[J]. Journal of Materials Chemistry C,2017,5(9):2318-2328. doi: 10.1039/C6TC05261D
[17]	FAN J X, ZHANG L, WEI S S, et al. A review of additive manu-facturing of metamaterials and developing trends[J]. Materials Today,2021,50:303-328.
[18]	CHENG Y, SEOW J Z Y, ZHAO H, et al. A flexible and lightweight biomass-reinforced microwave absorber[J]. Nano-Micro Letters,2020,12(10):5-19.
[19]	XIANG Z, SONG Y, XIONG J, et al. Enhanced electromagnetic wave absorption of nanoporous Fe₃O₄@carbon composites derived from metal-organic frameworks[J]. Carbon,2019,142:20-31. doi: 10.1016/j.carbon.2018.10.014
[20]	LIN Y, DAI J, YANG H, et al. Graphene multilayered sheets assembled by porous Bi₂Fe₄O₉ microspheres and the excellent electromagnetic wave absorption properties[J]. Chemical Engineering Journal,2018,334:1740-1748. doi: 10.1016/j.cej.2017.11.150
[21]	YANG L, LV H, LI M, et al. Multiple polarization effect of shell evolution on hierarchical hollow C@MnO₂ compo-sites and their wideband electromagnetic wave absorption properties[J]. Chemical Engineering Journal,2020,392:123666. doi: 10.1016/j.cej.2019.123666
[22]	LV H, ZHANG H, JI G, et al. Interface strategy to achieve tunable high frequency attenuation[J]. ACS Applied Materials & Interfaces,2016,8(10):6529-6538.
[23]	CAO M S, WANG X X, ZHANG M, et al. Electromagnetic response and energy conversion for functions and devices in low-dimensional materials[J]. Advanced Functional Materials,2019,29(25):1807398. doi: 10.1002/adfm.201807398
[24]	LIANG X, QUAN B, MAN Z, et al. Self-assembly three-dimensional porous carbon networks for efficient dielectric attenuation[J]. ACS Applied Materials & Interfaces,2019,11(33):30228-30233.
[25]	LIU W, TAN S, YANG Z, et al. Enhanced low-frequency electromagnetic properties of MOF-derived cobalt through interface design[J]. ACS Applied Materials & Interfaces,2018,10(37):31610-31622. doi: 10.1021/acsami.8b10685
[26]	ZHANG N, HUANG Y, ZONG M, et al. Synthesis of ZnS quantum dots and CoFe₂O4 nanoparticles co-loaded with graphene nanosheets as an efficient broad band EM wave absorber[J]. Chemical Engineering Journal,2017,308:214-221. doi: 10.1016/j.cej.2016.09.065
[27]	YANG Y, XIA L, ZHANG T, et al. Fe₃O₄@LAS/RGO compo-sites with a multiple transmission-absorption mechanism and enhanced electromagnetic wave absorption performance[J]. Chemical Engineering Journal,2018,352:510-518. doi: 10.1016/j.cej.2018.07.064
[28]	LV H, GUO Y, WU G, et al. Interface polarization strategy to solve electromagnetic wave interference issue[J]. ACS Applied Materials & Interfaces,2017,9(6):5660-5668.
[29]	LIU W, LIU L, JI G, et al. Composition design and structural characterization of MOF-derived composites with controllable electromagnetic properties[J]. ACS Sustainable Chemistry & Engineering,2017,5(9):7961-7971.
[30]	DENG B, XIANG Z, XIONG J, et al. Sandwich-like Fe&TiO₂@C nanocomposites derived from MXene/Fe-MOFs hybrids for electromagnetic absorption[J]. Nano-Micro Letters,2020,12(4):125-140.
[31]	ZHANG Z, CAI Z, WANG Z, et al. A review on metal-organic framework-derived porous carbon-based novel microwave absorption materials[J]. Nano-Micro Letters,2021,13(4):7-35.
[32]	FENG J, HOU Y, WANG Y, et al. Synthesis of hierarchical ZnFe₂O₄@SiO₂@RGO core-shell microspheres for enhanced electromagnetic wave absorption[J]. ACS Applied Materials & Interfaces,2017,9(16):14103-14111. doi: 10.1021/acsami.7b03330
[33]	CAO M S, SHU J C, WANG X X, et al. Electronic structure and electromagnetic properties for 2D electromagnetic functional materials in gigahertz frequency[J]. Annalen der Physik,2019,531(4):1800390. doi: 10.1002/andp.201800390
[34]	CAO M, CAI Y, HE P, et al. 2D MXenes: Electromagnetic property for microwave absorption and electromagnetic interference shielding[J]. Chemical Engineering Journal,2019,359:1265-1302. doi: 10.1016/j.cej.2018.11.051
[35]	LIU D, DU Y, LI Z, et al. Facile synthesis of 3D flower-like Ni microspheres with enhanced microwave absorption properties[J]. Journal of Materials Chemistry C,2018,6(36):9615-9623. doi: 10.1039/C8TC02931H
[36]	XIANG J, LI J, ZHANG X, et al. Magnetic carbon nanofibers containing uniformly dispersed Fe/Co/Ni nanoparticles as stable and high-performance electromagnetic wave absorbers[J]. Journal of Materials Chemistry A,2014,2(40):16905-16914. doi: 10.1039/C4TA03732D
[37]	XU Z, DU Y, LIU D, et al. Pea-like Fe/Fe₃C nanoparticles embedded in nitrogen-doped carbon nanotubes with tunable dielectric/magnetic loss and efficient electromagnetic absorption[J]. ACS Applied Materials & Interfaces,2019,11(4):4268-4277.
[38]	ZHANG Y, WANG X, CAO M. Confinedly implanted NiFe₂O₄-rGO: Cluster tailoring and highly tunable electromagnetic properties for selective-frequency microwave absorption[J]. Nano Research,2018,11(3):1426-1436. doi: 10.1007/s12274-017-1758-1
[39]	SHU X, REN H, JIANG Y, et al. Enhanced electromagnetic wave absorption performance of silane coupling agent KH550@Fe₃O₄ hollow nanospheres/graphene composites[J]. Journal of Materials Chemistry C,2020,8(8):2913-2926. doi: 10.1039/C9TC05658K
[40]	LIAN Y, HAN B, LIU D, et al. Solvent-free synthesis of ultrafine tungsten carbide nanoparticles-decorated carbon nanosheets for microwave absorption[J]. Nano-Micro Letters,2020,12(11):145-157.
[41]	WANG X, PAN F, XIANG Z, et al. Magnetic vortex core-shell Fe₃O₄@C nanorings with enhanced microwave absorption performance[J]. Carbon,2020,157:130-139. doi: 10.1016/j.carbon.2019.10.030
[42]	LIU X, HUANG Y, ZHANG N, et al. Fabrication of carbon-doped ZnCo₂O₄ yolk-shell microspheres compounded with magnetic graphene for enhanced electromagnetic wave absorption performance[J]. Ceramics International,2019,45(16):19720-19729. doi: 10.1016/j.ceramint.2019.06.224
[43]	LIU X, HUANG Y, YAN J, et al. Covalently bonded Fe₃O₄@SiO₂-reduced graphene oxide nanocomposites as high-efficiency electromagnetic wave absorbers[J]. Ceramics International,2020,46(4):5175-5184. doi: 10.1016/j.ceramint.2019.10.263
[44]	王玉江, 黄威, 黄玉炜, 等. SiC/Fe₃O₄/rGO复合材料的制备及吸波性能[J]. 材料导报, 2019, 33(10):1624-1629. doi: 10.11896/cldb.18060055 WANG Y J, HUANG W, HUANG Y W, et al. Preparation and microwave absorbing properties of SiC/Fe₃O₄/rGO composite materials[J]. Materials reports,2019,33(10):1624-1629(in Chinese). doi: 10.11896/cldb.18060055
[45]	WANG S, XU Y, FU R, et al. Rational construction of hierarchically porous Fe-Co/N-doped carbon/rGO compo-sites for broadband microwave absorption[J]. Nano-Micro Letters,2019,11(4):337-352.
[46]	ZHANG N, LIU X, HUANG Y, et al. Novel nanocomposites of cobalt ferrite covalently-grafted on graphene by amide bond as superior electromagnetic wave absorber[J]. Jour-nal of Colloid and Interface Science,2019,540:218-227. doi: 10.1016/j.jcis.2019.01.025
[47]	KANG S, ZHANG W, HU Z, et al. Porous core-shell zeolitic imidazolate framework-derived Co/NPC@ZnO-decorated reduced graphene oxide for lightweight and broadband electromagnetic wave absorber[J]. Journal of Alloys and Compounds,2020,818:152932. doi: 10.1016/j.jallcom.2019.152932
[48]	CHEN C, BAO S, ZHANG B, et al. Development of sulfide-doped Graphene/Fe₃O₄ absorber with wide band electromagnetic absorption performance[J]. Journal of Alloys and Compounds,2019,770:90-97. doi: 10.1016/j.jallcom.2018.08.057
[49]	WANG X, MA T, SHU J, et al. Confinedly tailoring Fe₃O₄ clusters-NG to tune electromagnetic parameters and microwave absorption with broadened bandwidth[J]. Chemical Engineering Journal,2018,332:321-330. doi: 10.1016/j.cej.2017.09.101