-
摘要: 采用改进的Hummers法制备了五种具有不同氧化程度的氧化石墨烯（GO）。借助元素分析、X射线光电子能谱及FTIR红外光谱测试对所制备GO的组成及结构衍变进行了表征。利用光学显微镜对不同GO在固化剂异佛尔酮二胺（IPDA）中的分散状态进行观察，并将分散效果最佳的GO试样用于改性碳纤维/环氧树脂（CF/EP）复合材料。结果表明，随着氧化剂用量及反应时间的增加，GO的氧化程度也随之增加。在氧化程度较低时，GO表面官能团主要以羰基、羧基和酚羟基为主。随着氧化程度的不断提高，GO表面官能团主要为醚、环氧和醇羟基结构。GO在IPDA中的分散状态与其氧化程度密切相关，氧化程度最低和最高的GO均出现明显的聚集现象。另外，GO表面在分散过程中可被IPDA化学改性。在EP基体中加入分散效果最佳的GO（0.2wt%）后，与CF/EP复合材料相比，CF-GO/EP复合材料的弯曲强度、层间剪切强度和Ⅱ型层间断裂韧性分别提高了14%、17%和14%。Abstract: Five graphene oxide (GO) with different oxidation degrees were prepared by the modified Hummers method. The composition and structure evolution of prepared GO were studied by elemental analysis, X-ray photo-electron spectroscopy and FTIR spectroscopy. The disperse states of different GO in the epoxy hardener (isophorone diamine, IPDA) were observed by an optical microscope. The GO sample which showed the best dispersibility was used to modify carbon fiber/epoxy(CF/EP) composites. The results indicate that by increasing the quantity of oxidant and reaction time, the oxidation degrees of GO increase accordingly. At a low oxidation degree, the functional groups on GO surfaces mainly contain carboxyl, carbonyl and phenolic groups. As the oxidation degree increases, the ether, epoxy and aliphatic hydroxyl groups gradually become dominant on GO surfaces. The disperse state of GO in IPDA is closely associated with the oxidation degree of GO. Both GO with the low and high oxidation degrees show clear aggregation. In addition, the GO surfaces can be chemically functionalized by IPDA during the dispersing process. Compared with the control sample with the unmodified EP matrix, the CF-GO/EP composites show about 14%, 17% and 14% increases in flexural strength, interlaminar shear strength and mode Ⅱ critical strain energy release rate (GⅡC), respectively, when the GO(0.2wt%) is added which has the best dispersibility is incorporated in the EP matrix.
-
Keywords:
- graphene oxide /
- oxidation degree /
- carbon fibers /
- epoxy resins /
- composites
-
-
期刊类型引用(15)
1. 吕晋书，马玉钦，庞利沙，王浩，张育洋，许怡，虢海银. 基于ANSYS的多尺度GO-CF/EP复合材料弯曲性能仿真及试验验证. 复旦学报(自然科学版). 2024(04): 481-491 . 
百度学术
2. 李臻，贾紫茹，程嘉瑞. 功能化环氧树脂涂层的研究进展. 石油化工腐蚀与防护. 2022(01): 24-27 . 百度学术
3. 陈官，马传国，付泽浩，王静，王亚珍. 磁场作用下氧化石墨烯包覆羟基氧化铁增强碳纤维/环氧树脂复合材料的层间断裂韧性. 航空材料学报. 2022(03): 89-96 . 百度学术
4. 刘文军，严建龙，周川，李伟东，周玉敬，邱虹，白华，胡晓兰. 氧化石墨烯改性碳纤维/环氧树脂复合材料的湿热性能及微观形貌. 复合材料学报. 2021(05): 1416-1425 . 本站查看
5. 刘义，李树锋，张策，闫民杰，孙颖颖. 碳纳米管对碳纤维复合材料防辐射性能的影响. 天津纺织科技. 2021(04): 40-43 . 百度学术
6. 刘刚，欧宝立，赵欣欣，彭彩茹，汪雨微. 共价功能化石墨烯超疏水防腐复合涂层材料的制备. 复合材料学报. 2021(10): 3236-3246 . 本站查看
7. 罗佳妮，李丽君，张晓思，邹汉涛，刘雪婷. 氧化石墨烯掺杂TiO_2改性活性炭纤维. 纺织学报. 2020(01): 8-14 . 百度学术
8. 刘桂艳. 氧化石墨烯/环氧树脂复合材料特性研究. 塑料科技. 2020(04): 10-13 . 百度学术
9. 段雯雯，王建军，辛振祥，王洪振. 环氧化天然橡胶改性石墨烯-炭黑/天然橡胶复合材料的制备及性能. 复合材料学报. 2020(07): 1667-1674 . 本站查看
10. 刘新，陈铎，何辉永，孙涛，武湛君. 热塑性颗粒-无机粒子协同增韧碳纤维增强环氧树脂复合材料. 复合材料学报. 2020(08): 1904-1910 . 本站查看
11. 段瑛涛，武肖鹏，王智文，敬敏，栗娜，刘强，宁慧铭，胡宁. 碳纤维增强树脂复合材料-热成型钢超混杂层合板层间力学性能. 复合材料学报. 2020(10): 2418-2427 . 本站查看
12. 任志东，郝思嘉，邢悦，杨程，戴圣龙. 氧化石墨烯改性环氧树脂及其复合材料的性能. 航空材料学报. 2019(02): 25-32 . 百度学术
13. 李欣儒，郑力军，石华强，吴彦飞. P(AA-AM)复合石墨烯凝胶暂堵剂的研制及性能评价. 应用化工. 2019(08): 1805-1808 . 百度学术
14. 姜浩田，鞠艾洵，肖润平，王博，王欣，于显利. 氧化石墨烯/碳纤维复合材料的制备及表征. 安全与电磁兼容. 2019(04): 58-61 . 百度学术
15. 张策，徐志伟，郭兴峰. 基于微波等离子体方法生长的纳米碳对碳纤维/环氧树脂复合材料界面性能的影响. 复合材料学报. 2018(11): 2994-3000 . 本站查看
其他类型引用(12)
-
计量
- 文章访问数: 1335
- HTML全文浏览量: 87
- PDF下载量: 432
- 被引次数: 27
下载:
