[1] |
顾轶卓, 李敏, 李艳霞, 等. 飞行器结构用复合材料制造技术与工艺理论进展[J]. 航空学报, 2015, 36(8):2773-2797.GU Yizhuo, LI Min, LI Yanxia, et al. Progress on manufacturing technology and process theory of aircraft composite structure[J]. Acta Aeronauticaet Astronautica Sinica,2015,36(8):2773-2797(in Chinese).
|
[2] |
李培旭, 陈萍, 苏佳智, 等. 复合材料先进液体成型技术的航空应用与最新发展[J]. 玻璃钢/复合材料, 2016(8):99-104.LI Peixu, CHEN Ping, SU Jiazhi, et al. The recent development of advanced liquid composite molding technique and its application in aviation[J]. Fiber Reinforced Plastics/Composites,2016(8):99-104(in Chinese).
|
[3] |
马立敏, 张嘉振, 岳广全, 等. 复合材料在新一代大型民用飞机中的应用[J]. 复合材料学报, 2015, 32(2):317-322.MA Liming, ZHANG Jiazheng, YUE Guangquan, et al. Application of composites in new generation of large civil aircraft[J]. Acta Materiae Compositae Sinica,2015,32(2):317-322(in Chinese).
|
[4] |
孙振起, 吴安如. 先进复合材料在飞机结构中的应用[J]. 材料导报, 2015, 29(11):61-64.SUN Zhengqi, WU Anru. Application of advanced compo-site in aircraft structures[J]. Materials Reports,2015,29(11):61-64(in Chinese).
|
[5] |
文立伟, 肖军, 王显峰, 等. 中国复合材料自动铺放技术研究进展[J]. 南京航空航天大学学报, 2015, 47(5):637-649.WEN Liwei, XIAO Jun, WANG Xianfeng, et al. Progress of automated placement technology for composites in china[J]. Journal of Nanjing University of Aeronautics & Astronautics,2015,47(5):637-649(in Chinese).
|
[6] |
陈亚莉. 复合材料成型工艺在A400M军用运输机上的应用[J]. 航空制造技术, 2008(10):32-35. doi: 10.3969/j.issn.1671-833X.2008.03.004CHEN Yali. Application of composite forming technique in military freighter A400M[J]. Aeronautical Manufacturing Technology,2008(10):32-35(in Chinese). doi: 10.3969/j.issn.1671-833X.2008.03.004
|
[7] |
DE M D. Process for the realization of a stiffener made of composite material with an omega section: USA, 8, 636, 935[P]. 2014-1-28.
|
[8] |
PARLA G C. Device and method of manufacturing omega stringers: USA, 9, 914, 270[P]. 2018-3-13.
|
[9] |
FARNAND K, ZOBEIRY N, POURSARTIP A, et al. Micro-level mechanisms of fiber waviness and wrinkling during hot drape forming of unidirectional prepreg compo-sites[J]. Composites Part A: Applied Science and Manufacturing,2017,103:168-77. doi: 10.1016/j.compositesa.2017.10.008
|
[10] |
BOISSE P, COLMARS J, HAMILA N, et al. Bending and wrinkling of composite fiber preforms and prepregs. A review and new developments in the draping simulations[J]. Composites Part B: Engineering,2018,141:234-49. doi: 10.1016/j.compositesb.2017.12.061
|
[11] |
陈萍, 赵月青, 陈菲, 等. 单向碳纤维/环氧树脂预浸料叠层的面内变形行为[J]. 复合材料学报, 2020, 37(5):1049-1055.CHEN Ping, ZHAO Yueqing, CHEN Fei, et al. In-plane deformation behavior of unidirectional carbon fiber/epoxy prepreg layups[J]. Acta Materiae Compositae Sinica,2020,37(5):1049-1055(in Chinese).
|
[12] |
MUKHOPADHYAY S, JONES M I, HALLETT S R. Compressive failure of laminates containing an embedded wrinkle; experimental and numerical study[J]. Composites Part A: Applied Science and Manufacturing,2015,73:132-42. doi: 10.1016/j.compositesa.2015.03.012
|
[13] |
BARAN I, STRAUMIT I, SHISHKINA O, et al. X-ray computed tomography characterization of manufacturing induced defects in a glass/polyester pultruded profile[J]. Composite Structures,2018,195:74-82. doi: 10.1016/j.compstruct.2018.04.030
|
[14] |
HÖRRMANN S, ADUMITROAIE A, VIECHTBAUER C, et al. The effect of fiber waviness on the fatigue life of CFRP materials[J]. International Journal of Fatigue,2016,90:139-47. doi: 10.1016/j.ijfatigue.2016.04.029
|
[15] |
姚双, 李敏, 顾轶卓, 等. 碳纤维复合材料C形结构热隔膜成型工艺[J]. 北京航空航天大学学报, 2013, 39(1):95-99.YAO Shuang, LI Ming, GU Yizhuo, et al. Hot diaphragm forming of carbon fiber composite with C-shaped structure[J]. Journal of Beijing University of Aeronautics and Astronautics,2013,39(1):95-99(in Chinese).
|
[16] |
WANG L, XU P, PENG X, et al. Characterization of inter-ply slipping behaviors in hot diaphragm preforming: Experiments and modelling[J]. Composites Part A: Applied Science and Manufacturing,2019,121:28-35. doi: 10.1016/j.compositesa.2019.03.012
|
[17] |
孙凯, 安学锋, 闫丽. 复合材料帽形长桁热隔膜成型工艺研究[J]. 化工新型材料, 2020, 48(2):166-168.SUN Kai, AN Xuefeng, YAN Li. Hot diaphragm preforming process for composite hat-shaped stringer[J]. New Chemical Materials,2020,48(2):166-168(in Chinese).
|
[18] |
马开维, 李博, 朱佳强, 等. 工艺参数对复合材料长桁成型载荷的影响[J]. 航空制造技术, 2019, 62(12):72-78.MA Kaiwei, LI Bo, ZHU Jiaqiang, et al. Effect of process parameters on forming load of composite stringer[J]. Aeronautical Manufacturing Technology,2019,62(12):72-78(in Chinese).
|
[19] |
马开维, 李博, 朱佳强, 等. 工艺参数对复合材料长桁预制体变形成型制件质量的影响[J]. 北京化工大学学报(自然科学版), 2019, 46(6):36-44.MA Kaiwei, LI Bo, ZHU Jiaqiang, et al. Effects of deformation forming process parameters on quality of the compo-sites stringers forming parts[J]. Journal of Beijing University of Chemical Technology(Natural Science Edition),2019,46(6):36-44(in Chinese).
|
[20] |
何林锋, 张鹏飞, 李希岩. 浅析复合材料制造过程中的缺陷处理[J]. 科技视界, 2017(2):10. doi: 10.3969/j.issn.2095-2457.2017.26.004HE Lingfeng, ZHANG Pengfei, LI Xiyan. The analysis of defect treatment in the manufacturing process of composite materials[J]. Science & Technology Vision,2017(2):10(in Chinese). doi: 10.3969/j.issn.2095-2457.2017.26.004
|
[21] |
SHARP N D, GOODSELL J E, FAVALORO A J. Measuring fiber orientation of elliptical fibers from optical microscopy[J]. Journal of Composites Science,2019,3(1):23. doi: 10.3390/jcs3010023
|
[22] |
LEE W I, LOOS A C, SPRINGER G S. Heat of reaction, degree of cure, and viscosity of Hercules 3501-6 resin[J]. Journal of Composite Materials,1982,16(6):510-520. doi: 10.1177/002199838201600605
|
[23] |
GORCZYCA-COLE J L, SHERWOOD J A, CHEN J. A friction model for thermostamping commingled glass-polypropylene woven fabrics[J]. Composites Part A: Applied Science and Manufacturing,2007,38(2):393-406. doi: 10.1016/j.compositesa.2006.03.006
|