T300/LD2热循环时产生滞后环原因及改善方法探讨
THE STUDY ON THE HYSTERESIS LOOP OF T300/LD2 AND IT’S IMPROVING
-
摘要: T300/LD2复合材料在热循环时产生滞后环并留下很大的残留应变。本文对T300/LD2试样在热循环时产生滞后环和残留应变的原因进行分析和探讨。实验结果表明,基体在热循环时大量的塑性变形是产生滞后环和残留应变的主要原因,并通过在界面预设不同应力和缩短热循环温度区间来研究界面应力状态和热循环温度区间跟热循环时滞后环和残留应变之间的关系。提出了改善残留应变和滞后的方法(1)尽量减少复合材料的使用环境中的温度变化,(2)根据材料的使用环境,经过各种预处理使复合材料在工作时基体处于弹性变形状态,(3)提高基体的屈服强度。Abstract: This paper studied the reasons of causing hystcresis loops and thermal strains of T300/LD3 when it is in thermal cycling.Experiment rosults indicated that the large plasticity of the matrix causes the thermal residual strains and hystcresis loops.It was also analyzed that the relations among the stress states of interfaces, the temperature ranges of thermal cycling and the thermal residual strains,A suggestion was put forward to improve the hystcresis and residual strain,which contains(1)minimizing the tomperaturc ranges of working environment of composites(2) making the matrix elastic under the working conditions and (3)incruasing the yiold stress of matrix.
-
Key words:
- Hysteresis loop /
- Thermal strain /
- Thermal cycling
-
点击查看大图
计量
- 文章访问数: 828
- PDF下载量: 1140
- 被引次数: 0
下载:
