Parameter effects of the main controlled anisotropic layer on structuraldamping of alternately laminated damped structures
-
摘要: 借助动态热机械分析仪(DMA Q800) 对交替层合各向异性阻尼结构阻尼性能的影响权重最大层的各参数进行优化实验研究。探讨了该主控约束层的不同铺设角度、不同厚度和不同多子层替代对层合阻尼结构刚度、阻尼的温频特性的影响规律。实验结果表明, 结构阻尼性能的影响权重最大层纤维铺设角度越接近90°(包括两个90°约束层层合) 时, 结构阻尼性能越好; 结构不同, 影响权重最大层较优厚度有所差异, 当阻尼层总厚度与结构阻尼性能影响最大层厚度比约为10 时, 结构阻尼性能较好。Abstract: Experimental study on parameter optimization of the maximal influencing factor layer of alternately laminated anisot ropic damped st ructures was carried out with dynamic mechanical analyzer (DMA Q800) . The influencesof different orientation angles , thicknesses and multilayer substitutes of the main cont rolled const rained layer ontemperature and f requency characteristics of the st ructural stiffness and damping were discussed. The experimentalresult s show that the st ructural damping characteristics are better while the orientation angle of the layer is close to90°(including the laminating of two 90°layers) ,and the optimal thickness is different in different st ructures , andthe st ructural damping characteristic is better while the ratio of the total thickness of the damping layers to the maincont rolled anisot ropic layer is about 10.
-
Key words:
- anisot ropy /
- alternate laminating /
- damped st ructures /
- main controlled parameter
-
点击查看大图
计量
- 文章访问数: 2392
- PDF下载量: 774
- 被引次数: 0
下载:
