Effect of laser parameters on mass ablative rate of carbon f iber reinforced composite
-
摘要: 为了研究激光参数对碳纤维增强有机硅改性环氧树脂复合材料质量烧蚀率的影响规律, 选用不同激光参数、采用高强度CO2激光器对该复合材料进行了激光辐照试验。分别分析了入射激光的辐照时间、强度和光斑直径对碳纤维增强有机硅改性环氧树脂复合材料质量烧蚀率的影响规律。研究结果表明: 激光辐照时间对该复合材料的质量烧蚀率的影响不大, 而该复合材料的质量烧蚀率随入射激光强度和光斑直径的增大而增大。Abstract: In order to study the effect of laser parameters on the mass ablative rate of the carbon f iber reinforcedsilicone modified epoxy resin composite , laser irradiation experiment s of the composite were carried out by a highpower CO2 laser with different laser parameters. The effect of the irradiation time , laser intensity and spot diameteron the mass ablative rate of carbon f iber reinforced silicone modified epoxy resin composite was analyzed respectively. The result s indicate that the mass ablative rate of the composite is not greatly affected by the laser irradiationtime , but affected by the laser intensity and spot diameter. The mass ablative rate of the composite increases whenthe laser intensity and spot diameter are increased.
点击查看大图
计量
- 文章访问数: 3184
- PDF下载量: 1065
- 被引次数: 0