Processing of C/ SiC-Cu composites by solution inf iltration and reduction
-
摘要: 提出了用CuCl2 溶液浸渍还原法制备C/ SiC-Cu 复合材料的新工艺。对还原工艺进行了初步探讨; 用XRD、EDS、SEM 研究复合材料的微观形貌及组成; 用三点弯曲测定C/ SiC-Cu 复合材料的弯曲强度。结果表明:影响增重率的主要因素为C/ SiC 原料的气孔率和浸渍还原次数。Cu 在复合材料中呈颗粒状或块状, 它不仅渗入到纤维束间, 还渗入到纤维间的微孔中。Cu 的渗入对C/ SiC 复合材料的三点弯曲强度基本无影响。
-
关键词:
- 溶液浸渍还原 /
- C/ SiC-Cu 复合材料 /
- CuCl2
Abstract: A new process of preparation of C/ SiC-Cu composite by copper dichloride saturated solution infilt rationand reduction was investigated. The conditions of reduction were studied primarily. The phase identification and microst ructure of the C/ SiC-Cu composite were analyzed by XRD , EDS and SEM. Mechanical properties were evaluated by the three-point flexural test . The results show that the main influencing factors of mass gain are porosityand repeat times. It has been observed that the particle-like or block-like Cu infiltrates into the pores among f iber bundles , also among the filaments. The infiltration of Cu hardly has any effect on the flexural strength of C/ SiC-Cu composite.-
Key words:
- solution infilt ration and reduction /
- C/ SiC-Cu composite /
- CuCl2
点击查看大图
计量
- 文章访问数: 1575
- PDF下载量: 873
- 被引次数: 0