Model of compressive strength of 3DNSRMMCs
-
摘要: 利用混合定则和参照Zum-Gahr 模型、Khruschov 模型, 建立了一种连续网络结构增强金属基复合材料的抗压强度模型, 并进一步对模型进行了修正。通过压力和负压浸渗技术制备了不同增强相体积分数的复合材料, 测试了其抗压强度值, 将试验数据与模型进行了拟合, 数据基本在模型限定范围内。形成的相互贯穿、相互缠绕的网络结构增强复合材料的抗压强度与增强相的体积分数在上限时呈线性关系, 且随体积分数的增加而增加; 在下限时呈非线性关系, 当增强相体积分数超过80 %以上时, 抗压强度明显增加。与基体相比, 复合材料的抗压强度有明显提高。Abstract: A model of the compressive st rength of metal mat rix composites reinforced by porous network st ructurehas been proposed and modified through the mixing rule and referring the Zum- Gahr model and Khruschov model.The composites with different volume f raction reinforcement s were fabricated via the method of infilt ration by pressure assisted and vacuum driven ( PVI) . Many test data of compressive st rength were obtained using YAW-1000pressure experiment machine and proved the correctness of the model. The model includes maximum limit and minimum limit , the maximum limit follows a linear rule while the minimum limit no longer does. The result s show thatthe compressive st rength of metal mat rix composites with interpenet rated and intertwisted st ructure is improved distinctly and increased with the increasing of volume f raction of the reinforcement . Specially , the compressive st rengthincreases greatly when the volume f raction exceeds 80 %.
-
Key words:
- metal mat rix composites /
- network st ructure /
- compressive st rength /
- model
点击查看大图
计量
- 文章访问数: 1838
- PDF下载量: 1581
- 被引次数: 0