[1] |
MEOLA C, BOCCARDI S, CARLOMAGNO G, et al. Nondestructive evaluation of carbon fibre reinforced composites with infrared thermography and ultrasonics[J]. Composite Structures,2015,134:845-853. doi: 10.1016/j.compstruct.2015.08.119
|
[2] |
REVERDY F, MAHAUT S, DOMINGUEZ N, et al. Simulation of ultrasonic inspection of curved composites using a hybrid semi-analytical/numerical code[C]//AIP Conference Proceedings. American Institute of Physics, 2015, 1650(1): 1047-1055.
|
[3] |
蔡菊生. 先进复合材料在航空航天领域的应用[J]. 合成材料老化与应用, 2018, 47(6): 94-97.CAI Jusheng. Application of advanced composite mater-ials in aerospace[J]. Synthetic Aging and Application, 2018, 47(6): 94-97(in Chinese).
|
[4] |
张婷, 黄爱华, 李向前. 褶皱缺陷的检测及对力学性能的影响研究[J]. 航空制造技术, 2021, 64(8):78-83. doi: 10.16080/j.issn1671-833x.2021.08.078ZHANG Ting, HUANG Aihua, LI Xiangqian. Research on wrinkle defects inspection and influence of wrinkle defects on mechanical properties[J]. Aeronautical Manufacturing Technology,2021,64(8):78-83(in Chinese). doi: 10.16080/j.issn1671-833x.2021.08.078
|
[5] |
曹弘毅, 马蒙源, 丁国强, 等. 复合材料层压板分层缺陷超声相控阵检测与评估[J]. 材料工程, 2021, 49(2):149-157. doi: 10.11868/j.issn.1001-4381.2020.000405CAO Hongyi, MA Mengyuan, DING Guoqiang, et al. Delamination defects testing and evaluation of composite laminates using phased array ultrasonic technique[J]. Journal of Materials Engineering,2021,49(2):149-157(in Chinese). doi: 10.11868/j.issn.1001-4381.2020.000405
|
[6] |
梁小林, 许希武, 林智育. 复合材料层板低速冲击后疲劳性能实验研究[J]. 材料工程, 2016, 44(12):100-106. doi: 10.11868/j.issn.1001-4381.2016.12.016LIANG Xiaolin, XU Xiwu, LIN Zhiyu. Fatigue performance of composite laminates after low-velocity impact[J]. Jour-nal of Materials Engineering,2016,44(12):100-106(in Chinese). doi: 10.11868/j.issn.1001-4381.2016.12.016
|
[7] |
王宝瑞, 丁新静. 纤维增强复合材料的无损探伤技术探讨[J]. 复合材料科学与工程, 2014(4):91-94. doi: 10.3969/j.issn.1003-0999.2014.04.020WANG Baorui, DING Xinjing. The non-destructive test of fiber-reinforced composites[J]. Composites Science and Engineering,2014(4):91-94(in Chinese). doi: 10.3969/j.issn.1003-0999.2014.04.020
|
[8] |
ZARDAN J P, GUEUDRÉ C, CORNELOUP G. Study of induced ultrasonic deviation for the detection and identification of ply waviness in carbon fibre reinforced polymer[J]. NDT& E International,2013,56:1-9.
|
[9] |
LI W, CHO Y, ACHENBACH J D. Detection of thermal fatigue in composites by second harmonic Lamb waves[J]. Smart Materials and Structures,2012,21(8):085019. doi: 10.1088/0964-1726/21/8/085019
|
[10] |
JIANG C, ZHANG C, LI W, et al. Assessment of damage in composites using static component generation of ultrasonic guided waves[J]. Smart Materials and Structures,2022,31(4):045025. doi: 10.1088/1361-665X/ac5a77
|
[11] |
PAIN D, DRINKWATER B W. Detection of fibre waviness using ultrasonic array scattering data[J]. Journal of Nondestructive Evaluation,2013,32(3):215-227. doi: 10.1007/s10921-013-0174-z
|
[12] |
NELSON L, SMITH R. Fibre direction and stacking sequence measurement in carbon fibre composites using Radon transforms of ultrasonic data[J]. Composites Part A: Applied Science and Manufacturing,2019,118:1-8. doi: 10.1016/j.compositesa.2018.12.009
|
[13] |
YANG X, VERBOVEN E, JU B F, et al. Comparative study of ultrasonic techniques for reconstructing the multilayer structure of composites[J]. NDT & E International,2021,121:102460.
|
[14] |
SMITH R A, NELSON L J, MIENCZAKOWSKI M J, et al. Ultrasonic analytic-signal responses from polymer-matrix composite laminates[J]. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control,2017,65(2):231-243. doi: 10.1109/TUFFC.2017.2774776
|
[15] |
YANG X, VERBOVEN E, JU B F, et al. Parametric study on interply tracking in multilayer composites by analytic-signal technology[J]. Ultrasonics,2021,111:106315. doi: 10.1016/j.ultras.2020.106315
|
[16] |
FAN C, CALEAP M, PAN M, et al. A comparison between ultrasonic array beamforming and super resolution imaging algorithms for non-destructive evaluation[J]. Ultrasonics,2014,54(7):1842-1850. doi: 10.1016/j.ultras.2013.12.012
|
[17] |
HUNTER A J, DRINKWATER B W, WILCOX P D. The wavenumber algorithm for full-matrix imaging using an ultrasonic array[J]. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control,2008,55(11):2450-2462. doi: 10.1109/TUFFC.952
|
[18] |
ROKHLIN S, WANG L. Ultrasonic waves in layered anisotropic media: Characterization of multidirectional compo-sites[J]. International Journal of Solids and Structures,2002,39(21-22):5529-5545. doi: 10.1016/S0020-7683(02)00500-0
|
[19] |
曹欢庆. CFRP构件R区相控阵超声检测原理和方法研究[D]. 大连: 大连理工大学, 2020.CAO Huanqing. Research on principle and method for phased array ultrasonic testing of radii part in CFRP components[D]. Dalian: Dalian University of Technology, 2020(in Chinese).
|
[20] |
GRAGER J C, SCHRAPP M, MOOSHOFER H, et al. Ultrasonic imaging of carbon fiber-reinforced plastics using the full matrix capture data acquisition technique[C]// 19th World Conference on Nondestructive Testing, Munich, 2016.
|
[21] |
MOSER T. Shortest path calculation of seismic rays[J]. Geophysics,1991,56(1):59-67. doi: 10.1190/1.1442958
|
[22] |
NOWERS O, DUXBURY D J, ZHANG J, et al. Novel ray-tracing algorithms in NDE: Application of Dijkstra and A* algorithms to the inspection of an anisotropic weld[J]. NDT & E International,2014,61:58-66.
|
[23] |
ZHOU H, HAN Z, DU D, et al. A combined marching and minimizing ray-tracing algorithm developed for ultrasonic array imaging of austenitic welds[J]. NDT & E International,2018,95:45-56.
|
[24] |
LIN L, CAO H, LUO Z. Dijkstra’s algorithm-based ray tracing method for total focusing method imaging of CFRP laminates[J]. Composite Structures,2019,215:298-304. doi: 10.1016/j.compstruct.2019.02.086
|
[25] |
CAO H, GUO S, ZHANG S, et al. Ray tracing method for ultrasonic array imaging of CFRP corner part using homogenization method[J]. NDT & E International,2021,122:102493.
|
[26] |
ROSE J L. Ultrasonic guided waves in silid media[M]. Cambridge: Cambridge University Press, 2014.
|
[27] |
LIN L, CAO H, LUO Z. Total focusing method imaging of multidirectional CFRP laminate with model-based time delay correction[J]. NDT & E International,2018,97:51-58.
|