玻璃纤维/酚醛树脂复合材料热响应预报方法玻璃纤维/酚醛树脂复合材料热响应预报方法

Forecasting method for thermal response of glass fiber/phenolic resin composites

  • 摘要: 为研究航空复合材料在火灾环境下的热响应,考虑材料热解过程,建立了复合材料热响应方程组,推导了显式有限差分格式,研究了玻璃纤维/酚醛树脂复合材料内部瞬态热响应与碳化规律。结果表明:建立的非线性热响应方程组与计算方法能够预测玻璃纤维/酚醛树脂复合材料的温度-时间历程,800 s时的受热表面温度达到了1048℃,背面温度为226℃,与实验值吻合较好;随着材料深度增加,材料达到热解温度所需的时间更长,材料密度下降速率随之降低,碳化过程变慢;热解反应区中不同深度位置的材料剩余质量分数在同一温度下略有不同,位置越深,剩余质量分数越小,碳化程度越高;随着时间推移,发生热解的材料比重增大,碳化范围逐步扩大,热解层厚度范围也逐渐扩大。

     

    Abstract: In order to study the thermal response of aerospace composites in fire, equations of the composite thermal response were established considering the process of thermal decomposition, the explicit finite difference scheme was derived, and the internal transient thermal response and carbonization of glass fiber/phenolic resin composites were studied. The results show that the equations of nonlinear thermal response established and the method adopted can predict the temperature-time progress of glass fiber/phenolic resin composites, and the temperature of the heating surface at 800 s reaches 1048℃ and the back temperature is 226℃, which are in good agreement with the experimental values. With the increment of the depth, it takes longer for the material to reach the thermal pyrolysis temperature, at the same time, the rate of decrement of material density also decreases, and the carbonization process slows down. The residual mass fraction of materials at different depth in the pyrolysis reaction zone is slightly different at the same temperature, i.e. the deeper the position is, the smaller the residual mass fraction, and the higher the degree of carbonization. As time goes by, the proportion of materials participating in the pyrolysis reaction increases, the carbonization range gradually expands, and the thickness range of the pyrolysis layer gradually expands.

     

/

返回文章
返回