非贯通球形空腔型轻质仿生结构的设计及其力学性能

杨志贤; 于娜; 刘泽华

doi:10.13801/j.cnki.fhclxb.20140916.001

非贯通球形空腔型轻质仿生结构的设计及其力学性能

江苏大学机械工程学院, 镇江 212013

基金项目: 国家自然科学基金青年基金(51005105);江苏大学高级人才启动基金(10JDG058)

详细信息

通讯作者:
杨志贤,博士,讲师,硕士生导师,研究方向为仿生材料与轻质结构的设计。E-mail:hiyoo@mail.ujs.edu.cn

中图分类号: TB332
计量
- 文章访问数: 781
- HTML全文浏览量: 64
- PDF下载量: 777
出版历程
- 收稿日期: 2014-05-27
- 修回日期: 2014-08-08
- 刊出日期: 2015-06-14

Design and mechanical properties of lightweight bionic structures with non-connected spherical lumens

School of Mechanical Engineering, Jiangsu University, Zhenjiang 212013, China

摘要

摘要: 为设计并开发轻量型仿生复合材料, 分析了东方龙虱鞘翅断面的微观结构, 发现龙虱鞘翅的内部空腔结构为非贯通球形空腔。受龙虱鞘翅独特结构的启发设计了一种轻质仿生结构, 球形空腔以正六边形的形式分布于该结构内部。为考察该仿生结构的力学特性, 引入了两种常见的中空结构, 并借助有限元分析软件ANSYS分别对该仿生结构和其他两种常见的中空结构的压缩、拉伸及弯曲性能进行了有限元分析和对比研究。结果表明:该仿生结构较其他两种常见的中空结构具有更强的抗压能力、抗拉能力及更高的屈服强度, 力学性能优异。该仿生结构在材料结构方面为研制新型仿生复合材料提供了仿生学参考。
- 鞘翅 /
- 仿生结构 /
- 非贯通空腔 /
- 力学性能 /
- 有限元分析
Abstract: In order to design and develop lightweight bionic composites, the microstructure of Cybister's elytra cross section was analyzed. It was found that the inside hollow structure of Cybister's elytra is non-connected spherical lumens. Inspired by the unique structures of Cybister's elytra, a lightweight bionic structure was designed. Some spherical lumens were distributed by regular hexagon form in the structure. In order to investigate the mechanical characteristics of the bionic structure, two kinds of common hollow structures were brought in. By using the finite element analysis software ANSYS, the compression, tension and bending properties of the bionic structure and the other two kinds of common hollow structures were finite element analyzed and comparatively studied. The result shows that the bionic structure has much stronger anti-pressure ability and tensile resistance, as well as far higher yield strength, than the other two kinds of common hollow structures, the mechanical properties are excellent. This bionic structure could provide bionics references for developing novel biomimetic composites in the aspect of material structures.
- elytra /
- bionic structure /
- non-connected lumen /
- mechanical properties /
- finite element analysis

HTML全文

参考文献(0)

施引文献(22)

期刊类型引用(9)

1.	金书明，李德华，杨明，林天一，许辉，龚耀华，张烜维. 某T1000级碳纤维缠绕复合材料壳体承压特性. 复合材料学报. 2024(09): 4993-5003 . 本站查看
2.	刘冬，田明，王菲，张承双，包艳玲，张承灏，苏忠民. 碳纤维复合材料壳体预浸带铺放原位成型轨迹规划. 复合材料学报. 2024(12): 6488-6497 . 本站查看
3.	黄泽升，竺铝涛，沈伟，陈立峰. 纤维缠绕工艺在复合材料压力容器上的研究进展. 现代纺织技术. 2023(02): 230-243 . 百度学术
4.	赵冠熹，何太碧，李明，韩锐，汪霞. 玄武岩纤维气瓶非测地线缠绕强度模拟与爆破试验. 油气储运. 2023(05): 577-585 . 百度学术
5.	祖磊，牟星，张骞，范文俊，吴世俊，吴乔国，张桂明，耿洪波. 基于板壳理论的纤维缠绕壳体结构设计分析. 复合材料科学与工程. 2022(12): 5-16 . 百度学术
6.	张桂明，刘超凡，郑磊，唐自佳，祖磊，张骞. 基于遗传算法的不等开口复合材料壳体缠绕角优化设计方法. 纤维复合材料. 2022(04): 18-23 . 百度学术
7.	顾付伟，顾周越，朱晓磊，陆晓峰，方岱宁，李鲤. 一种无焊缝连接金属内衬复合材料压力容器的制备工艺及其液压实验. 复合材料学报. 2021(01): 198-208 . 本站查看
8.	董九志，李晓晨，陈云军，杨素君. 碳/碳坩埚预制体增强碳纤维缠绕线型设计. 产业用纺织品. 2021(09): 45 . 百度学术
9.	刘培启，杨帆，黄强华，王迪，陈祖志，耿发贵，古纯霖. T700碳纤维增强树脂复合材料气瓶封头非测地线缠绕强度. 复合材料学报. 2019(12): 2772-2778 . 本站查看