Citation: | XU Xiong, LI Zhijian, ZHANG Hongyang, et al. Fabrication and stamping of Mg-Al laminates[J]. Acta Materiae Compositae Sinica, 2023, 40(10): 5577-5587. doi: 10.13801/j.cnki.fhclxb.20230221.001 |
[1] |
GAO K, ZHANG X, LIU B, et al. The deformation characteristics, fracture behavior and strengthening-toughening mechanisms of laminated metal composites: A review[J]. Metals,2020,10(1):4. doi: 10.3390/met10010004
|
[2] |
BUI T Q, HU X. A review of phase-field models, fundamentals and their applications to composite laminates[J]. Engineering Fracture Mechanics,2021,248:107705. doi: 10.1016/j.engfracmech.2021.107705
|
[3] |
YANG Y, XIONG X, CHEN J, et al. Research advances in magnesium and magnesium alloys worldwide in 2020[J]. Journal of Magnesium and Alloys,2021,9(3):705-747. doi: 10.1016/j.jma.2021.04.001
|
[4] |
XU T, YANG Y, PENG X, et al. Overview of advancement and development trend on magnesium alloy[J]. Journal of Magnesium and Alloys,2019,7(3):536-544. doi: 10.1016/j.jma.2019.08.001
|
[5] |
宋光玲. 镁合金腐蚀与防护[M]. 北京: 化学工业出版社, 2006: 11-18.
SONG Guangling. Corrosion and protection of magnesium alloys[M]. Beijing: Chemical Industry Press, 2006: 11-18(in Chinese).
|
[6] |
刘鹏, 李亚江, 王娟. Mg/Al异种材料扩散焊界面组织结构及力学性能[J]. 焊接学报, 2007, 28(6):45-48. doi: 10.3321/j.issn:0253-360X.2007.06.012
LIU Peng, LI Yajiang, WANG Juan. Microstructure and properties near interface zone of diffusion-bonded joint for Mg/Al dissimilar materials[J]. Transactions of the China Welding Institution,2007,28(6):45-48(in Chinese). doi: 10.3321/j.issn:0253-360X.2007.06.012
|
[7] |
LI L, XIAO L, ZHANG D, et al. Ductilization of a diffusion-bonded heterostructured AZ31/GW103K/AZ31 alloy by interfacial reinforcement[J]. Materials Science and Engineering: A,2022,852:143691. doi: 10.1016/j.msea.2022.143691
|
[8] |
JAFARIAN M, KHODABANDEH A, MANAFI S. Evaluation of diffusion welding of 6061 aluminum and AZ31 magnesium alloys without using an interlayer[J]. Materials & Design (1980-2015),2015,65:160-164.
|
[9] |
钱乙余, 董占贵, 石素琴, 等. 铝接触反应钎焊的成缝行为[J]. 焊接学报, 2001, 22(5):13-16. doi: 10.3321/j.issn:0253-360X.2001.05.004
QIAN Yiyu, DONG Zhangui, SHI Suqin, et al. Behavior of aluminum contact reactive brazing[J]. Transactions of the China Welding Institution,2001,22(5):13-16(in Chinese). doi: 10.3321/j.issn:0253-360X.2001.05.004
|
[10] |
聂海杰, 李红, 龙伟民, 等. 接触反应钎焊技术研究进展[J]. 焊接, 2015(5):25-29. doi: 10.3969/j.issn.1001-1382.2015.05.007
NIE Haijie, LI hong, LONG Weimin, et al. Research developments of contact reaction brazing[J]. Welding & Joining,2015(5):25-29(in Chinese). doi: 10.3969/j.issn.1001-1382.2015.05.007
|
[11] |
YAN Y B, ZHANG Z W, SHEN W, et al. Microstructure and properties of magnesium AZ31B-aluminum 7075 explosively welded composite plate[J]. Materials Science and Engineering: A,2010,527(9):2241-2245. doi: 10.1016/j.msea.2009.12.007
|
[12] |
张婷婷, 王文先, 袁晓丹, 等. Mg/Al合金爆炸焊连接及其界面接合机制[J]. 机械工程学报, 2016, 52(12):52-58. doi: 10.3901/JME.2016.12.052
ZHANG Tingting, WANG Wenxian, YUAN Xiaodan, et al. Interface bonding mechanism of Mg/Al alloy explosive welded[J]. Journal of Mechanical Engineering,2016,52(12):52-58(in Chinese). doi: 10.3901/JME.2016.12.052
|
[13] |
CHEN Z, WANG D, CAO X, et al. Influence of multi-pass rolling and subsequent annealing on the interface microstructure and mechanical properties of the explosive welding Mg/Al composite plates[J]. Materials Science and Engineering: A,2018,723:97-108. doi: 10.1016/j.msea.2018.03.042
|
[14] |
ZHU B, LIANG W, LI X. Interfacial microstructure, bonding strength and fracture of magnesium-aluminum laminated composite plates fabricated by direct hot pressing[J]. Materials Science and Engineering: A,2011,528(21):6584-6588. doi: 10.1016/j.msea.2011.05.015
|
[15] |
许哲峰. 热压扩散法制备钛钢复合板的研究进展[J]. 热加工工艺, 2017, 46(10):14-17.
XU Zhefeng. Research progress of titanium steel composite plate prepared by hot-pressing diffusion method[J]. Hot Working Technology,2017,46(10):14-17(in Chinese).
|
[16] |
ZHANG X P, YANG T H, CASTAGNE S, et al. Microstructure, bonding strength and thickness ratio of Al/Mg/Al alloy laminated composites prepared by hot rolling[J]. Materials Science and Engineering: A,2011,528(4):1954-1960.
|
[17] |
MATSUMOTO H, WATANABE S, HANADA S. Fabrication of pure Al/Mg-Li alloy clad plate and its mechanical properties[J]. Journal of Materials Processing Technology,2005,169(1):9-15. doi: 10.1016/j.jmatprotec.2005.03.005
|
[18] |
ZHANG X P, YANG T H, LIU J Q, et al. Mechanical properties of an Al/Mg/Al trilaminated composite fabricated by hot rolling[J]. Journal of Materials Science,2010,45(13):3457-3464. doi: 10.1007/s10853-010-4373-z
|
[19] |
WANG T, LI S, NIU H, et al. EBSD research on the interfacial microstructure of the corrugated Mg/Al laminated material[J]. Journal of Materials Research and Technology,2020,9(3):5840-5847. doi: 10.1016/j.jmrt.2020.03.111
|
[20] |
LIU W, LIU Y, WANG T, et al. Analysis of deformation mechanism in corrugated rolling of composite plate[J]. Procedia Manufacturing,2020,50:552-557. doi: 10.1016/j.promfg.2020.08.099
|
[21] |
BAE J H, PRASADA RAO A K, KIM K H, et al. Cladding of Mg alloy with Al by twin-roll casting[J]. Scripta Materialia,2011,64(9):836-839. doi: 10.1016/j.scriptamat.2011.01.013
|
[22] |
WU K, CHANG H, MAAWAD E, et al. Microstructure and mechanical properties of the Mg/Al laminated composite fabricated by accumulative roll bonding (ARB)[J]. Materials Science and Engineering: A,2010,527(13):3073-3078.
|
[23] |
CHANG H, ZHENG M Y, GAN W M, et al. Texture evolution of the Mg/Al laminated composite fabricated by the accumulative roll bonding[J]. Scripta Materialia,2009,61(7):717-720. doi: 10.1016/j.scriptamat.2009.06.014
|
[24] |
CHEN M C, HSIEH H C, WU W. The evolution of microstructures and mechanical properties during accumulative roll bonding of Al/Mg composite[J]. Journal of Alloys and Compounds,2006,416(1):169-172.
|
[25] |
方洪渊, 冯吉才. 材料连接过程中的界面行为[M]. 哈尔滨: 哈尔滨工业大学出版社, 2005: 133-139.
FANG Hongyuan, FENG Jicai. Interfacial behavior during material bonding[M]. Harbin: Harbin Institute of Technology Press, 2005: 133-139(in Chinese).
|
[26] |
俞笑蓉. 真空扩散焊技术的应用[J]. 机械制造, 1987(12):27-28.
YU Xiaorong. Application of vacuum diffusion welding technology[J]. Machinery,1987(12):27-28(in Chinese).
|
[27] |
SEYYED AFGHAHI S S, JAFARIAN M, PAIDAR M, et al. Diffusion bonding of Al 7075 and Mg AZ31 alloys: Process parameters, microstructural analysis and mechanical properties[J]. Transactions of Nonferrous Metals Society of China,2016,26(7):1843-1851. doi: 10.1016/S1003-6326(16)64295-4
|
[28] |
FERNANDUS M J, SENTHILKUMAR T, BALASUBRAMANIAN V. Developing temperature-time and pressure-time diagrams for diffusion bonding AZ31B magnesium and AA6061 aluminium alloys[J]. Transactions of the Indian Institute of Metals,2013,66(2):177-183. doi: 10.1007/s12666-013-0240-3
|
[29] |
赵丽敏. 镁合金AZ31/铝合金6061异种金属接触反应钎焊研究[D]. 大连: 大连理工大学, 2010.
ZHAO Limin. Study on contact reactive brazing of magnesium AZ31/aluminum 6061 dissimilar alloys[D]. Dalian: Dalian University of Technology, 2010(in Chinese).
|
[30] |
LIU L, TAN J, LIU X. Reactive brazing of Al alloy to Mg alloy using zinc-based brazing alloy[J]. Materials Letters,2007,61(11):2373-2377.
|
[31] |
王世宇, 李卓然, 张招, 等. Mg/Cu/Al接触反应钎焊工艺及元素扩散行为分析[J]. 焊接学报, 2018, 39(1):13-16, 129.
WANG Shiyu, LI Zhuoran, ZHANG Zhao, et al. Analysis of Mg/Cu/Al contact reaction brazing process and element diffusion behavior[J]. Transactions of the China Welding Institution,2018,39(1):13-16, 129(in Chinese).
|
[32] |
YANG T, WANG K, ZHANG D, et al. Contact-reaction brazing of an AZ31 magnesium/3003 aluminum alloy using a silver-copper-zinc interlayer[J]. Journal of Materials Processing Technology,2017,249:531-537. doi: 10.1016/j.jmatprotec.2017.06.041
|
[33] |
张柯柯, 涂益民. 特种先进连接方法[M]. 哈尔滨: 哈尔滨工业大学出版, 2008: 230-241.
ZHANG Keke, TU Yimin. Special advanced welding and joining technology[M]. Harbin: Harbin Institute of Technology Press, 2008: 230-241(in Chinese).
|
[34] |
田广民, 李选明, 赵永庆, 等. 层状金属复合材料加工技术研究现状[J]. 中国材料进展, 2013(11):696-701. doi: 10.7502/j.issn.1674-3962.2013.11.09
TIAN Guangmin, LI Xuanming, ZHAO Yongqing, et al. Research status of processing technology of laminated metal composite[J]. Materials China,2013(11):696-701(in Chinese). doi: 10.7502/j.issn.1674-3962.2013.11.09
|
[35] |
王建民, 朱锡, 刘润泉. 爆炸焊接的应用与发展[J]. 材料导报, 2006(1):42-45.
WANG Jianmin, ZHU Xi, LIU Runquan. Application and development of explosive welding[J]. Materials Review,2006(1):42-45(in Chinese).
|
[36] |
BALGA D, OSTROUSHKO D, SAKSL K, et al. Structure and mechanical properties of explosive welded Mg/Al bimetal[J]. Archives of Metallurgy and Materials,2014,59(4):1593-1597.
|
[37] |
KUMAR P, KUMAR GHOSH S, DEB BARMA J, et al. The joining of magnesium and aluminium alloys by inclined arrangement of explosive welding[J]. Materials Today: Proceedings,2023,76:536-541. doi: 10.1016/j.matpr.2022.11.160
|
[38] |
KUMAR S, WU C. Eliminating intermetallic compounds via Ni interlayer during friction stir welding of dissimilar Mg/Al alloys[J]. Journal of Materials Research and Technology,2021,15:4353-4369. doi: 10.1016/j.jmrt.2021.10.065
|
[39] |
XU Y, KE L M, MAO Y Q, et al. An innovative joint interface design for reducing intermetallic compounds and improving joint strength of thick plate friction stir welded Al/Mg joints[J/OL]. Journal of Magnesium and Alloys, 2022-03-05. https://doi.org/10.1016/j.jma.2022.01.007
|
[40] |
PANTELI A, CHEN Y C, STRONG D, et al. Optimization of aluminium-to-magnesium ultrasonic spot welding[J]. JOM,2012,64(3):414-420. doi: 10.1007/s11837-012-0268-6
|
[41] |
GAO M, MEI S, LI X, et al. Characterization and formation mechanism of laser-welded Mg and Al alloys using Ti interlayer[J]. Scripta Materialia,2012,67(2):193-196. doi: 10.1016/j.scriptamat.2012.04.015
|
[42] |
朱波. 镁铝复合板热压法制备工艺及其层界面组织性能研究[D]. 太原: 太原理工大学, 2011.
ZHU Bo. Fabrication of Mg/Al composite plates by direct hot pressing and the laminate interface structures and properties[D]. Taiyuan: Taiyuan University of Technology, 2011(in Chinese).
|
[43] |
LI X, LIANG W, ZHAO X, et al. Bonding of Mg and Al with Mg-Al eutectic alloy and its application in aluminum coating on magnesium[J]. Journal of Alloys and Compounds,2009,471(1):408-411.
|
[44] |
LUO C, LIANG W, CHEN Z, et al. Effect of high temperature annealing and subsequent hot rolling on microstructural evolution at the bond-interface of Al/Mg/Al alloy laminated composites[J]. Materials Characterization,2013,84:34-40. doi: 10.1016/j.matchar.2013.07.007
|
[45] |
CHE B, LU L, ZHANG J, et al. Effects of cryogenic treatment on microstructure and mechanical properties of AZ31 magnesium alloy rolled at different paths[J]. Materials Science and Engineering: A,2022,832:142475. doi: 10.1016/j.msea.2021.142475
|
[46] |
RAKSHITH M, SEENUVASAPERUMAL P. Review on the effect of different processing techniques on the microstructure and mechanical behaviour of AZ31 magnesium alloy[J]. Journal of Magnesium and Alloys,2021,9(5):1692-1714. doi: 10.1016/j.jma.2021.03.019
|
[47] |
张亚萍, 靳丽, 董杰, 等. 道次压下量和退火工艺对Mg-Zn-Ce-Zr合金微观组织及力学性能的影响[J]. 中国有色金属学报, 2012, 22(11):2985-2991. doi: 10.19476/j.ysxb.1004.0609.2012.11.001
ZHANG Yaping, JIN Li, DONG Jie, et al. Effects of per-pass reduction and annealing treatment on microstructures and mechanical properties of Mg-Zn-Ce-Zr alloy[J]. The Chinese Journal of Nonferrous Metals,2012,22(11):2985-2991(in Chinese). doi: 10.19476/j.ysxb.1004.0609.2012.11.001
|
[48] |
BARNETT M R. Twinning and the ductility of magnesium alloys: Part I: "Tension" twins[J]. Materials Science and Engineering: A,2007,464(1):1-7.
|
[49] |
BARNETT M R. Twinning and the ductility of magnesium alloys: Part II: "Contraction" twins[J]. Materials Science and Engineering: A,2007,464(1):8-16.
|
[50] |
王东, 马宗义. 轧制工艺对7050铝合金显微组织和力学性能的影响[J]. 金属学报, 2008, 44(1):49-54.
WANG Dong, MA Zongyi. Effects of rolling process on microstructure and mechanical property of 7050 aluminum alloy[J]. Acta Metallurgica Sinica,2008,44(1):49-54(in Chinese).
|
[51] |
李东锋, 张新明, 刘胜胆, 等. 轧制变形量对Al-5Zn-3Mg-1Cu合金显微组织和力学性能的影响[J]. 华南理工大学学报(自然科学版), 2015, 43(11):75-80.
LI Dongfeng, ZHANG Xinming, LIU Shengdan, et al. Effect of rolling deformation on microstructure and mechanical properties of Al-5Zn-3Mg-1Cu alloy[J]. Journal of South China University of Technology (Natural Science Edition),2015,43(11):75-80(in Chinese).
|
[52] |
YU Z, WANG T, LIU C, et al. Investigation on microstructure, mechanical properties and fracture mechanism of Mg/Al laminated composites[J]. Materials Science and Engineering: A,2022,848:143410. doi: 10.1016/j.msea.2022.143410
|
[53] |
黄庆学, 朱琳, 李玉贵, 等. 一种轧制金属复合板带的方法: CN, 103736728 A[P]. 2014-01-22.
HUANG Qingxue, ZHU Lin, LI Yugui, et al. The invention relates to a method for rolling metal composite plate belt: CN, 103736728 A[P]. 2014-01-22(in Chinese).
|
[54] |
黄庆学, 朱琳, 周存龙, 等. 一种轧制制备金属复合板带的方法: CN, 103736729 A[P]. 2014-01-22.
HUANG Qingxue, ZHU Lin, ZHOU Cunlong, et al. The invention relates to a method for preparing metal composite plate belt by rolling: CN, 103736729 A[P]. 2014-01-22(in Chinese).
|
[55] |
王涛, 齐艳阳, 刘江林, 等. 金属层合板轧制复合工艺国内外研究进展[J]. 哈尔滨工业大学学报, 2020, 52(6):42-56. doi: 10.11918/202003114
WANG Tao, QI Yanyang, LIU Jianglin, et al. Research progress of metal laminates roll bonding process at home and abroad[J]. Journal of Harbin Institute of Technology,2020,52(6):42-56(in Chinese). doi: 10.11918/202003114
|
[56] |
WANG T, LI S, REN Z, et al. Microstructure characterization and mechanical property of Mg/Al laminated composite prepared by the novel approach: Corrugated + flat rolling[J]. Metals,2019,765:138318.
|
[57] |
NIE H, LIANG W, YANG F, et al. Texture evolution of single-pass hot-rolled 5052/AZ31/5052 clad sheets[J]. JOM,2016,68(8):2274-2287. doi: 10.1007/s11837-016-1923-0
|
[58] |
SAITO Y, TSUJI N, UTSUNOMIYA H, et al. Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process[J]. Scripta Materialia,1998,39(9):1221-1227. doi: 10.1016/S1359-6462(98)00302-9
|
[59] |
SAITO Y, UTSUNOMIYA H, TSUJI N, et al. Novel ultra-high straining process for bulk materials development of the accumulative roll-bonding (ARB) process[J]. Acta Materialia,1999,47(2):579-583. doi: 10.1016/S1359-6454(98)00365-6
|
[60] |
LIU H S, ZHANG B, ZHANG G P. Microstructures and mechanical properties of Al/Mg alloy multilayered composites produced by accumulative roll bonding[J]. Journal of Materials Science & Technology,2011,27(1):15-21.
|
[61] |
CHEN Z J, LIU Q, WANG G J, et al. Deformation inhomogeneities of Mg-Al laminated metal composites fabricated by accumulative roll bonding[J]. Materials Research Innovations,2015,19(sup4):S147-S151. doi: 10.1179/1432891715Z.0000000001533
|
[62] |
NIE J, LIU M, WANG F, et al. Fabrication of Al/Mg/Al composites via accumulative roll bonding and their mechanical properties[J]. Materials,2016,9(11):951. doi: 10.3390/ma9110951
|
[63] |
HABILA W, AZZEDDINE H, MEHDI B, et al. Investigation of microstructure and texture evolution of a Mg/Al laminated composite elaborated by accumulative roll bonding[J]. Materials Characterization,2019,147:242-252. doi: 10.1016/j.matchar.2018.11.010
|
[64] |
MROZ S, WIERZBA A, STEFANIK A, et al. Effect of asymmetric accumulative roll-bonding process on the microstructure and strength evolution of the AA1050/AZ31/AA1050 multilayered composite materials[J]. Materials,2020,13(23):5401. doi: 10.3390/ma13235401
|
[65] |
韩顺昌. 爆炸焊接界面相变与断口组织[M]. 北京: 国防工业出版社, 2011: 149-157.
HAN Shunchang. Phase transformation and fractography of interface of explosive welding[M]. Beijing: National Defense Industry Press, 2011: 149-157(in Chinese).
|
[66] |
CAO M, WANG C J, DENG K K, et al. Effect of interface on mechanical properties of Ti/Al/Mg/Al/Ti laminated composites[J]. Materials Research,2020,23(1):e20190648.
|
[67] |
彭治力, 颜家维, 唐靖钊, 等. 电流辅助累积叠轧镁/铝层状复合板的微观形貌及力学性能[J]. 机械工程材料, 2019, 43(12):1-6. doi: 10.11973/jxgccl201912001
PENG Zhili, YAN Jiawei, TANG Jingzhao, et al. Microstructure and mechanical properties of Mg/Al multilayered composite sheet by electrically-assisted accumulative roll bonding[J]. Materials for Mechanical Engineering,2019,43(12):1-6(in Chinese). doi: 10.11973/jxgccl201912001
|
[68] |
王跃林. Mg/Al复合板波纹辊轧制成形数值仿真及实验研究[D]. 太原: 太原理工大学, 2019.
WANG Yuelin. Numerical simulation and experimental study on roll forming of Mg/Al composite sheets by corrugated roll[D]. Taiyuan: Taiyuan University of Technology, 2019(in Chinese).
|
[69] |
张建军. Al/Mg/Al热轧复合板的制备及其微观组织和力学性能研究[D]. 太原: 太原理工大学, 2016.
ZHANG Jianjun. Preparation of Al/Mg/AI laminated composite fabricated by hot rolled and investigation of microstructure and mechnaical properties[D]. Taiyuan: Taiyuan University of Technology, 2016(in Chinese).
|
[70] |
吴琼, 杨素媛. AZ31/1060爆炸复合板界面区组织与性能研究[J]. 稀有金属, 2016, 40(10):996-1001. doi: 10.13373/j.cnki.cjrm.xy14121503
WU Qiong, YANG Suyuan. Microstructure and properties of bonding interface in explosive welded AZ31/1060 composite plate[J]. Chinese Journal of Rare Metals,2016,40(10):996-1001(in Chinese). doi: 10.13373/j.cnki.cjrm.xy14121503
|
[71] |
ACARER M, DEMIR B. An investigation of mechanical and metallurgical properties of explosive welded aluminum- dual phase steel[J]. Materials Letters,2008,62(25):4158-4160. doi: 10.1016/j.matlet.2008.05.060
|
[72] |
唐亮亮. 镁/铝复合板爆炸焊接数值模拟及试验分析[D]. 西安: 长安大学, 2019.
TANG Liangliang. Numerical simulation and experimental analysis of explosive welding of Mg/Al composite plate[D]. Xi'an: Chang'an University, 2019(in Chinese).
|
[73] |
MIHARA-NARITA M, ASAI K, SATO H, et al. Interfacial microstructure and mechanical properties of explosively welded Mg/Al alloy plates[J]. Journal of Materials Engineering and Performance,2022,31(9):7039-7048. doi: 10.1007/s11665-022-06843-z
|
[74] |
赵平. 镁/铝爆炸复合板轧制过程的数值模拟分析[D]. 西安: 长安大学, 2019.
ZHAO Ping. Numerical simulation analysis of rolling process of magnesium/aluminum explosive composite plate[D]. Xi'an: Chang'an University, 2019(in Chinese).
|
[75] |
陈志青. 镁/铝爆炸焊复合板热加工过程中结合界面研究[D]. 太原: 太原理工大学, 2019.
CHEN Zhiqing. Study on bonding interface of magnesium/ aluminum explosive welding composite plate in hot working process[D]. Taiyuan: Taiyuan University of Technology, 2019(in Chinese).
|
[76] |
王东亚. 镁/铝爆炸复合板轧制工艺及界面行为研究[D]. 太原: 太原理工大学, 2017.
WANG Dongya. Rolling process and interface behavior of Mg/Al explosive welding composite plate[D]. Taiyuan: Taiyuan University of Technology, 2017(in Chinese).
|
[77] |
YIN F, LIU C, ZHANG Y, et al. Effect of Ni interlayer on characteristics of diffusion bonded Mg/Al joints[J]. Materials Science and Technology,2018,34(9):1104-1111. doi: 10.1080/02670836.2018.1424382
|
[78] |
罗长增. 两道次热轧Al/Mg/Al复合板的界面微观结构演变及其对复合板力学性能的影响[D]. 山西: 太原理工大学, 2013.
LUO Changzeng. Interfacial microstructure evolution of Al/Mg/Al laminates fabricated by two-pass hot rolling and influences of that on mechanical properties[D]. Taiyuan: Taiyuan University of Technology, 2013(in Chinese).
|
[79] |
CHEN M C, KUO C W, CHANG C M, et al. Diffusion and formation of intermetallic compounds during accumulative roll-bonding of Al/Mg alloys[J]. Materials Transactions,2007,48(10):2595-2598. doi: 10.2320/matertrans.MD200718
|
[80] |
RAHMATABADI D, PAHLAVANI M, GHOLAMI M D, et al. Production of Al/Mg-Li composite by the accumulative roll bonding process[J]. Journal of Materials Research and Technology,2020,9(4):7880-7886. doi: 10.1016/j.jmrt.2020.05.084
|
[81] |
中华人民共和国国家质量监督检验检疫总局. 中国国家标准化管理委员会. 金属薄板—成形性能与试验方法—第8部分: 成形极限图(FLD)测定指南: GB/T 15825.8—2008[S]. 北京: 中国标准出版社, 2008.
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. Standardization Administration of China. Sheet metal—Forming properties and test methods—Part 8: Guide for determination of forming limit diagram (FLD): GB/T 15825.8—2008[S]. Beijing: Standards Press of China, 2008(in Chinese).
|
[82] |
中华人民共和国国家质量监督检验检疫总局. 中国国家标准化管理委员会. 金属薄板成形性能与试验方法—第3部分: 拉深与拉深载荷试验: GB/T 15825.3—2008[S]. 北京: 中国标准出版社, 2008.
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. Standardization Administration of China. Sheet metal forming properties and test methods—Part 3: Deep drawing and deep drawing load test: GB/T 15825.3—2008[S]. Beijing: Standards Press of China, 2008(in Chinese).
|
[83] |
NIE H, LIANG W, KANG X, et al. Bulging ability and microstructure evolutions of Al/Mg/Al laminate[J]. Journal of Materials Engineering and Performance,2020,29(3):1782-1791. doi: 10.1007/s11665-020-04717-w
|
[84] |
ROUZBEH A, HASHEMI R, SEDIGHI M. Experimental and numerical study of microstructure, mechanical characteristics, and forming limit curve for Al 1050/Mg-AZ31B two-layer sheets manufactured via roll bonding technique[J]. Journal of Alloys and Compounds,2023,942:169059. doi: 10.1016/j.jallcom.2023.169059
|
[85] |
NIE H, CHI C, CHEN H, et al. Microstructure evolution of Al/Mg/Al laminates in deep drawing process[J]. Journal of Materials Research and Technology,2019,8(6):5325-5335. doi: 10.1016/j.jmrt.2019.08.053
|
[86] |
LI C, CHI C, LIN P, et al. Deformation behavior and interface microstructure evolution of Al/Mg/Al multilayer composite sheets during deep drawing[J]. Materials & Design,2015,77:15-24.
|
[87] |
CHEN F K, HUANG T B, CHANG C K. Deep drawing of square cups with magnesium alloy AZ31 sheets[J]. International Journal of Machine Tools and Manufacture,2003,43(15):1553-1559. doi: 10.1016/S0890-6955(03)00198-6
|