STUDY OF THE TECHNOLOGICAL PROCESS FORMANUFACTURING Al2O3+Ni COMPOSITE WITH AN INTERLAYER
-
摘要: 为了制取Al2O3+ Ni 复合材料, 首先用化学汽相沉积(CVD) 法在Al2O3颗粒表面镀TiN。用SEM (扫描电镜) 和EDX (能谱) 分析镀层的均匀性。用X 射线荧光光谱法分析粉末的Ti 含量。然后用热压法制取这种金属陶瓷复合材料。由于TiN 中间层的存在, 复合材料的致密化和力学性能获得明显改善Abstract: In order to manufacture Al2O3+Ni composite, Al2O3 particles were first coated with TiN by CVD. The homogeneity of the coating layer was characterized by SEM and EDX. The Ti content of the coated powder was analyzed by X ray fluorescence spectrometry. The composite was produced by hot pressing. The densification and mechanical properties of the composite are improved remarkably by applying TiN interlayer. The higher the hot pressing temperature, the more pronounced the favourable effect will be. One reason for these experimental results is that the wettability between TiN and Ni is better than that between Al2O3 and Ni.
-
Key words:
- ceramic matrix composite
点击查看大图
计量
- 文章访问数: 1357
- PDF下载量: 724
- 被引次数: 0