FINITE ELEMENT METHOD BASED ON THE ENERGY EQUIVALENCE FOR PREDICTING THE ELASTIC MODULUS OF Al<sub>2</sub>O<sub>3</sub>f/Al COMPOSITES

Kang Guo-zheng; Gao Qing; Liu Shi-kai; Zhang Ji-xi

Article Contents

Article Navigation > Acta Materiae Compositae Sinica > 1999 > 16(2): 82-87

Kang Guo-zheng, Gao Qing, Liu Shi-kai, et al. FINITE ELEMENT METHOD BASED ON THE ENERGY EQUIVALENCE FOR PREDICTING THE ELASTIC MODULUS OF Al2O3f/Al COMPOSITES[J]. Acta Materiae Compositae Sinica, 1999, 16(2): 82-87.

Citation:

Kang Guo-zheng, Gao Qing, Liu Shi-kai, et al. FINITE ELEMENT METHOD BASED ON THE ENERGY EQUIVALENCE FOR PREDICTING THE ELASTIC MODULUS OF Al₂O₃f/Al COMPOSITES[J]. Acta Materiae Compositae Sinica, 1999, 16(2): 82-87.

Citation:

PDF( 389 KB)

FINITE ELEMENT METHOD BASED ON THE ENERGY EQUIVALENCE FOR PREDICTING THE ELASTIC MODULUS OF Al₂O₃f/Al COMPOSITES

1.
Department of Applied Mechanics and Engineering, Southwest Jiaotong University, Chengdu 610031;
2.
Department of Material Engineering, Southwest Jiaotong University, Chengdu 610031

Received Date: 1997-10-15
Rev Recd Date: 1998-03-06
Publish Date: 1999-06-25

Abstract

Abstract

Based on the energy equivalence principle, the elastic modulus of Al₂O₃f/Al composite was predicted by means of the Finite Element Method. In the predicting, the random orientation distribution of short fiber was considered. The results were compared with the experimental values and those of previous predicting methods. In the end, it can be concluded that the method developed in this paper is reasonable and precise.
- short fiber reinforced metal matrix composites
Long Abstrsct
Innovation Points