PP/PA6 INSITU COMPOSITE I.MORPHOLOGY AND MECHANICAL PROPERTIES

Li Xue-dong; Chen Ming-cai; Huang Yu-hui; Lin Guo; Zhao Shu-lu; Liao Bing; Pang Hao; Cong Guang-min

Article Contents

Article Navigation > Acta Materiae Compositae Sinica > 1998 > 15(2): 57-61

Li Xue-dong, Chen Ming-cai, Huang Yu-hui, et al. PP/PA6 INSITU COMPOSITE I.MORPHOLOGY AND MECHANICAL PROPERTIES[J]. Acta Materiae Compositae Sinica, 1998, 15(2): 57-61.

Citation:

Li Xue-dong, Chen Ming-cai, Huang Yu-hui, et al. PP/PA6 INSITU COMPOSITE I.MORPHOLOGY AND MECHANICAL PROPERTIES[J]. Acta Materiae Compositae Sinica, 1998, 15(2): 57-61.

Li Xue-dong, Chen Ming-cai, Huang Yu-hui, et al. PP/PA6 INSITU COMPOSITE I.MORPHOLOGY AND MECHANICAL PROPERTIES[J]. Acta Materiae Compositae Sinica, 1998, 15(2): 57-61.

Citation:

Li Xue-dong, Chen Ming-cai, Huang Yu-hui, et al. PP/PA6 INSITU COMPOSITE I.MORPHOLOGY AND MECHANICAL PROPERTIES[J]. Acta Materiae Compositae Sinica, 1998, 15(2): 57-61.

PDF( 330 KB)

PP/PA6 INSITU COMPOSITE I.MORPHOLOGY AND MECHANICAL PROPERTIES

Guangzhou Institute of Chemistry, Chinese Academy of Science, Guangzhou 510650

Publish Date: 1998-06-25

Abstract

Abstract

PP and PA6 were extruded with a single screw extruder. PA6 could form microfibrils in PP matrix. When the blends were compression molded at the temperature between the melting temperature of PP and that of PA6, these fibrils could be maintained in the matrix. The existence of PA6 microfibrils improved the impact strength but the tensile strength of the composites decreased.
- insitu composite
Long Abstrsct
Innovation Points