SYNTHESIS AND THE PERFORMANCE OF CARBON NANOTUBES-(Ni-P) COMPOSITES

WANG Xinqing; WANG Miao; LI Zhenhua; ZHU Haibin; WANG Fengfei; HE Shaolong; HAN Baoshan; HE Pimo

Article Contents

Article Navigation > Acta Materiae Compositae Sinica > 2003 > 20(6): 142-146

WANG Xinqing, WANG Miao, LI Zhenhua, et al. SYNTHESIS AND THE PERFORMANCE OF CARBON NANOTUBES-(Ni-P) COMPOSITES[J]. Acta Materiae Compositae Sinica, 2003, 20(6): 142-146.

Citation:

WANG Xinqing, WANG Miao, LI Zhenhua, et al. SYNTHESIS AND THE PERFORMANCE OF CARBON NANOTUBES-(Ni-P) COMPOSITES[J]. Acta Materiae Compositae Sinica, 2003, 20(6): 142-146.

WANG Xinqing, WANG Miao, LI Zhenhua, et al. SYNTHESIS AND THE PERFORMANCE OF CARBON NANOTUBES-(Ni-P) COMPOSITES[J]. Acta Materiae Compositae Sinica, 2003, 20(6): 142-146.

Citation:

WANG Xinqing, WANG Miao, LI Zhenhua, et al. SYNTHESIS AND THE PERFORMANCE OF CARBON NANOTUBES-(Ni-P) COMPOSITES[J]. Acta Materiae Compositae Sinica, 2003, 20(6): 142-146.

PDF( 1224 KB)

SYNTHESIS AND THE PERFORMANCE OF CARBON NANOTUBES-(Ni-P) COMPOSITES

1.
Department of Physics;
2.
Micro System Center for Research and Development;
3.
Department of Mechanics, Zhejiang University, Hangzhou 310027,China;
4.
State Key Laboratory of Magnetism, Institute of Physics and Center of Condensed Matter Physics,Chinese Academy of Sciences, Beijing 100080,China

Received Date: 2002-10-18
Rev Recd Date: 2003-02-26
Publish Date: 2003-12-15

Abstract

Abstract

The CNTs-(Ni-P) composites were prepared by electroless plating on 45^# steel substrate, and the optimum composition and operating conditions were obtained. The TEM was used to observe the CNTs' structure,the SEM was used to observe the appearance and distribution of the CNTs in the composites and the AFM(atomic force microscopy) was used to analyze the roughness status of the composite surface. The influence of the CNTs on the tribological performance of the composites is discussed. The results show that the CNTs-(Ni-P) composites have better wear-resistance than the uncoated substrate and the substrate coated with nikel.
- carbon nanotube(CNT),
- electroless composite plating,
- composite
Long Abstrsct
Innovation Points